Journal papers

2024

Near-Room-Temperature Detection of Aromatic Compounds with Inkjet-Printed Plasticized Polymer Composites

M. M. Kiaee; T. Maeder; J. Brugger 

Acs Sensors. 2024-03-13. Vol. 9, num. 3, p. 1382-1390. DOI : 10.1021/acssensors.3c02406.

Tomographic microscopy of functionally graded polymer-derived SiCN ceramics with tunable gradients

L. Hageluken; M. G. Makowska; F. Marone; J. Brugger 

Materialia. 2024-01-31. Vol. 33, p. 102025. DOI : 10.1016/j.mtla.2024.102025.

2023

Towards optical MAS magnetic resonance using optical traps

L. Marti; N. S. Solmaz; M. Kern; A. Chu; R. Farsi et al. 

Journal Of Magnetic Resonance Open. 2023-12-28. Vol. 18, p. 100145. DOI : 10.1016/j.jmro.2023.100145.

Nanoliter Liquid Packaging in a Bioresorbable Microsystem by Additive Manufacturing and its Application as a Controlled Drug Delivery Device

J. Park; A. Bertsch; C. Martin Olmos; J. Brugger 

Advanced Functional Materials. 2023-05-26. num. 2302385. DOI : 10.1002/adfm.202302385.

2022

Nanobridge Stencil Enabling High Resolution Arbitrarily Shaped Metallic Thin Films on Various Substrates

Y-C. Sun; G. Boero; J. Brugger 

Advanced Materials Technologies. 2022-12-04. DOI : 10.1002/admt.202201119.

Nanopore Generation in Biodegradable Silk/Magnetic Nanoparticle Membranes by an External Magnetic Field for Implantable Drug Delivery

Y. Wang; G. Boero; X. Zhang; J. Brugger 

Acs Applied Materials & Interfaces. 2022-08-29. Vol. 14, num. 35, p. 40418–40426. DOI : 10.1021/acsami.2c10603.

Edge-Contact MoS2 Transistors Fabricated Using Thermal Scanning Probe Lithography

A. Conde-Rubio; X. Liu; G. Boero; J. Brugger 

Acs Applied Materials & Interfaces. 2022-09-07. Vol. 14, num. 37, p. 42328-42336. DOI : 10.1021/acsami.2c10150.

Comparison of electrical and optical transduction modes of DNA-wrapped SWCNT nanosensors for the reversible detection of neurotransmitters.

P. Clement; J. Ackermann; N. Sahin-Solmaz; S. Herbertz; G. Boero et al. 

Biosensors & Bioelectronics. 2022-11-15. Vol. 216, p. 114642. DOI : 10.1016/j.bios.2022.114642.

Study of the enhanced electricity output of a sliding droplet-based triboelectric nanogenerator for droplet sensor design

W. Xu; X. Li; J. Brugger; X. Liu 

Nano Energy. 2022-03-27. Vol. 98, p. 107166. DOI : 10.1016/j.nanoen.2022.107166.

SU-8 cantilever with integrated pyrolyzed glass-like carbon piezoresistor

J. Jang; G. Panusa; G. Boero; J. Brugger 

Microsystems & Nanoengineering. 2022-02-10. Vol. 8, num. 1, p. 22. DOI : 10.1038/s41378-022-00351-9.

NMR spectroscopy of a single mammalian early stage embryo

G. Sivelli; G. M. Conley; C. Herrera; K. Marable; K. J. Rodriguez et al. 

Journal Of Magnetic Resonance. 2022-02-01. Vol. 335, p. 107142. DOI : 10.1016/j.jmr.2021.107142.

Precise Capillary‐Assisted Nanoparticle Assembly in Reusable Templates

H. Yu; A. Conde Rubio; H-C. Wang; O. Martin; G. Boero et al. 

Particle & Particle Systems Characterization. 2022-02-08.  p. 1-8, 2100288. DOI : 10.1002/ppsc.202100288.

Tomographic Volumetric Additive Manufacturing of Silicon Oxycarbide Ceramics

M. Kollep; G. Konstantinou; J. Madrid-Wolff; A. Boniface; L. Hagelüken et al. 

Advanced Engineering Materials. 2022-01-16. Vol. 24, num. 7, p. 2101345. DOI : 10.1002/adem.202101345.

2021

Multiscale 2D/3D microshaping and property tuning of polymer-derived SiCN ceramics

L. Hagelüken; P. V. Warriam Sasikumar; H-Y. Lee; D. Di Stadio; Y. Chandorkar et al. 

Journal of the European Ceramic Society. 2021-12-17. Vol. 42, num. 5, p. 1963-1970. DOI : 10.1016/j.jeurceramsoc.2021.12.044.

Stretchable Conductors Fabricated by Stencil Lithography and Centrifugal Force-Assisted Patterning of Liquid Metal

Y-C. Sun; G. Boero; J. Brugger 

ACS Applied Electronic Materials. 2021-11-29. Vol. 3, num. 12, p. 5423–5432. DOI : 10.1021/acsaelm.1c00884.

Next Generation Cell Culture Tools Featuring Micro- and Nanotopographies for Biological Screening

J. Carthew; H. H. Abdelmaksoud; K. J. Cowley; M. Hodgson-Garms; R. Elnathan et al. 

Advanced Functional Materials. 2021-04-21.  p. 2100881. DOI : 10.1002/adfm.202100881.

Precision Surface Microtopography Regulates Cell Fate via Changes to Actomyosin Contractility and Nuclear Architecture

J. Carthew; H. H. Abdelmaksoud; M. Hodgson-Garms; S. Aslanoglou; S. Ghavamian et al. 

Advanced Science. 2021-01-29. Vol. 8, num. 6, p. 2003186. DOI : 10.1002/advs.202003186.

2020

Electrochemical performance of polymer-derived SiOC and SiTiOC ceramic electrodes for artificial cardiac pacemaker applications

J. Jang; P. V. Warriam Sasikumar; F. Navaee; L. Hagelüken; G. Blugan et al. 

Ceramics International. 2020-11-19. Vol. 47, num. 6, p. 7593-7601. DOI : 10.1016/j.ceramint.2020.11.098.

Inkjet‐Printed Composites for Room‐Temperature VOC Sensing: From Ink Formulation to Sensor Characterization

M. Kiaee; T. Maeder; J. Brugger 

Advanced Materials Technologies. 2020-12-06.  p. 1-11, 2000929. DOI : 10.1002/admt.202000929.

Thermomechanical Nanostraining of Two-Dimensional Materials

X. Liu; A. K. Sachan; S. T. Howell; A. Conde-Rubio; A. W. Knoll et al. 

Nano Letters. 2020-10-08. Vol. 20, num. 11, p. 8250-8257. DOI : 10.1021/acs.nanolett.0c03358.

NMR microsystem for label-free characterization of 3D nanoliter microtissues

M. Grisi; G. M. Conley; K. J. Rodriguez; E. Riva; L. Egli et al. 

Scientific Reports. 2020-10-27. Vol. 10, p. 1-9, 18306. DOI : 10.1038/s41598-020-75480-0.

Reversible Drug Delivery: Thermal and pH Sensitive Composite Membrane for On‐Demand Drug Delivery by Applying an Alternating Magnetic Field (Adv. Mater. Interfaces 17/2020)

Y. Wang; G. Boero; X. Zhang; J. Brugger 

Advanced Materials Interfaces. 2020-09-11. Vol. 7, num. 17, p. 2070095. DOI : 10.1002/admi.202070095.

Thermal and pH Sensitive Composite Membrane for On-Demand Drug Delivery by Applying an Alternating Magnetic Field

Y. Wang; G. Boero; X. Zhang; J. Brugger 

Advanced Materials Interfaces. 2020-07-12. Vol. 7, num. 17, p. 2000733. DOI : 10.1002/admi.202000733.

Cracks, porosity and microstructure of Ti modified polymer-derived SiOC revealed by absorption-, XRD- and XRF-contrast 2D and 3D imaging

M. Makowska; P. V. W. Sasikumar; L. Hagelüken; D. F. Sanchez; N. Casati et al. 

Acta Materialia. 2020-08-01. Vol. 198, p. 134-144. DOI : 10.1016/j.actamat.2020.07.067.

Single chip dynamic nuclear polarization microsystem

N. Sahin Solmaz; M. Grisi; A. V. Matheoud; G. Gualco; G. Boero 

Analytical Chemistry. 2020-06-12. Vol. 92, num. 14, p. 9782–9789. DOI : 10.1021/acs.analchem.0c01221.

Thermomechanical Nanocutting of 2D Materials

X. Liu; S. T. Howell; A. Conde-Rubio; G. Boero; J. Brugger 

Advanced Materials. 2020-06-11.  p. 2001232. DOI : 10.1002/adma.202001232.

Additive micro-manufacturing of crack-free PDCs by two-photon polymerization of a single, low-shrinkage preceramic resin

G. Konstantinou; E. Kakkava; L. Hagelüken; P. V. Warriam Sasikumar; J. Wang et al. 

Additive Manufacturing. 2020-05-26.  p. 101343. DOI : 10.1016/j.addma.2020.101343.

In Vitro Cytocompatibility Assessment of Ti-Modified, Silicon-oxycarbide-Based, Polymer-Derived, Ceramic-Implantable Electrodes under Pacing Conditions

P. V. W. Sasikumar; E. Mueller; P. Clement; J. Jang; E. Kakkava et al. 

Acs Applied Materials & Interfaces. 2020-04-15. Vol. 12, num. 15, p. 17244-17253. DOI : 10.1021/acsami.0c01465.

Na3V2(PO4)(3)-Supported Electrospun Carbon Nanofiber Nonwoven Fabric as Self-Standing Na-Ion Cell Cathode

G. Meligrana; S. Ferrari; L. Lucherini; J. Cele; F. Colo et al. 

Chemelectrochem. 2020-04-01. Vol. 7, num. 7, p. 1652-1659. DOI : 10.1002/celc.202000345.

Simply Structured Wearable Triboelectric Nanogenerator Based on a Hybrid Composition of Carbon Nanotubes and Polymer Layer

M. Su; J. Brugger; B. Kim 

International Journal Of Precision Engineering And Manufacturing-Green Technology. 2020-04-03. Vol. 7, p. 683–698. DOI : 10.1007/s40684-020-00212-8.

Level-line moirés by superposition of cylindrical microlens gratings

T. Walger; T. Besson; V. Flauraud; R. D. Hersch; J. Brugger 

Journal of the Optical Society of America. 2020-01-10. Vol. A37, num. 2, p. 209-218. DOI : 10.1364/JOSAA.37.000209.

2019

Transient Electronics: Biodegradable Frequency‐Selective Magnesium Radio‐Frequency Microresonators for Transient Biomedical Implants (Adv. Funct. Mater. 39/2019)

M. Rüegg; R. Blum; G. Boero; J. Brugger 

Advanced Functional Materials. 2019. Vol. 29, num. 39, p. 1970270. DOI : 10.1002/adfm.201970270.

1D moiré shapes by superposed layers of micro-lenses

T. Walger; T. Besson; V. Flauraud; R. D. Hersch; J. Brugger 

Optics Express. 2019-12-23. Vol. 27, num. 26, p. 37419-37434. DOI : 10.1364/OE.27.037419.

Printed silk-fibroin-based triboelectric nanogenerators for multi-functional wearable sensing

D-L. Wen; X. Liu; H-T. Deng; D-H. Sun; H-Y. Qian et al. 

Nano Energy. 2019-12-01. Vol. 66, p. 104123. DOI : 10.1016/j.nanoen.2019.104123.

Phase masks for electron microscopy fabricated by thermal scanning probe lithography

S. Hettler; L. Radtke; L. Grünewald; Y. Lisunova; O. Peric et al. 

Micron. 2019-10-03. Vol. 127, p. 102753. DOI : 10.1016/j.micron.2019.102753.

A 3D Microscaffold Cochlear Electrode Array for Steroid Elution

J. Jang; J. Kim; Y. C. Kim; S. Kim; N. Chou et al. 

Advanced Healthcare Materials. 2019-09-18.  p. 1900379. DOI : 10.1002/adhm.201900379.

CMOS and 3D Printing for NMR Spectroscopy at the Single Embryo Scale

M. Grisi; E. Montinaro; F. Vincent; L. Petho; M. C. Letizia et al. 

Chimia. 2019-08-01. Vol. 73, num. 7-8, p. 635-635. DOI : 10.2533/chimia.2019.635.

A Low-Power Microwave HEMT $LC$ Oscillator Operating Down to 1.4 K

A. V. Matheoud; N. Sahin Solmaz; G. Boero 

IEEE Transactions on Microwave Theory and Techniques. 2019-06-03. Vol. 67, num. 7, p. 2782-2792. DOI : 10.1109/TMTT.2019.2916552.

Liquid Assembly of Floating Nanomaterial Sheets for Transparent Electronics

Z. Su; H. S. C. Yu; X. Zhang; J. Brugger; H. Zhang 

Advanced Materials Technologies. 2019-08-15.  p. 1900398. DOI : 10.1002/admt.201900398.

Biodegradable Frequency‐Selective Magnesium Radio‐Frequency Microresonators for Transient Biomedical Implants

M. Rüegg; R. Blum; G. Boero; J. Brugger 

Advanced Functional Materials. 2019-08-07. Vol. 29, num. 39, p. 1903051. DOI : 10.1002/adfm.201903051.

Ferrimagnetic resonance field sensors for particle accelerators

A. Beaumont; M. Buzio; G. Boero 

Review Of Scientific Instruments. 2019-06-01. Vol. 90, num. 6, p. 065005. DOI : 10.1063/1.5097508.

Microwave inductive proximity sensors with sub-pm/Hz1/2 resolution

A. V. Matheoud; N. Sahin Solmaz; L. Frehner; G. Boero 

Sensors and Actuators A: Physical. 2019-08-15. Vol. 295, p. 259-265. DOI : 10.1016/j.sna.2019.05.041.

A single-chip integrated transceiver for high field NMR magnetometry

M. Grisi; G. M. Conley; P. Sommer; J. Tinembart; G. Boero 

Review Of Scientific Instruments. 2019-01-01. Vol. 90, num. 1, p. 015001. DOI : 10.1063/1.5066436.

2018

Unusually Long-Lived Photocharges in Helical Organic Semiconductor Nanostructures

R. J. Hafner; L. Tian; J. C. Brauer; T. Schmaltz; A. Sienkiewicz et al. 

Acs Nano. 2018-09-01. Vol. 12, num. 9, p. 9116-9125. DOI : 10.1021/acsnano.8b03165.

A single chip electron spin resonance detector based on a single high electron mobility transistor

A. V. Matheoud; N. Sahin; G. Boero 

Journal of Magnetic Resonance. 2018-07-05. Vol. 294, p. 59-70. DOI : 10.1016/j.jmr.2018.07.002.

Growth of Large-Area 2D MoS2 Arrays at Pre-Defined Locations Using Stencil Mask Lithography

I. Sharma; Y. Batra; V. Flauraud; J. Brugger; B. R. Mehta 

Journal of Nanoscience and Nanotechnology. 2018-03-01. Vol. 18, num. 3, p. 1824-1832. DOI : 10.1166/jnn.2018.14265.

All-in-one self-powered flexible microsystems based on triboelectric nanogenerators

X-S. Zhang; M. Han; B. Kim; J-F. Bao; J. Brugger et al. 

Nano Energy. 2018. Vol. 47, p. 410-426. DOI : 10.1016/j.nanoen.2018.02.046.

Combination of thermal scanning probe lithography and ion etching to fabricate 3D silicon nanopatterns with extremely smooth surface

Y. Lisunova; J. Brugger 

Microelectronic Engineering. 2018-06-05. Vol. 193, p. 23-27. DOI : 10.1016/j.mee.2018.02.012.

3D printed microchannels for sub-nL NMR spectroscopy

E. Montinaro; M. Grisi; M. C. Letizia; L. Pethö; M. A. M. Gijs et al. 

PLOS ONE. 2018-05-09. Vol. 13, num. 5, p. e0192780. DOI : 10.1371/journal.pone.0192780.

Nanostructured surface topographies have an effect on bactericidal activity

S. Wu; F. Zuber; K. Maniura-Weber; J. Brugger; Q. Ren 

Journal of Nanobiotechnology. 2018-02-28. Vol. 16, num. 1, p. 20. DOI : 10.1186/s12951-018-0347-0.

All-fiber hybrid piezoelectric-enhanced triboelectric nanogenerator for wearable gesture monitoring

Y. Guo; X. Zhang; Y. Wang; W. Gong; Q. Zhang et al. 

Nano Energy. 2018-02-26. Vol. 48, p. 152-160. DOI : 10.1016/j.nanoen.2018.03.033.

Optical Antenna-Based Fluorescence Correlation Spectroscopy to Probe the Nanoscale Dynamics of Biological Membranes

P. Winkler; R. Regmi; V. Flauraud; J. Brugger; H. Rigneault et al. 

The Journal of Physical Chemistry Letters. 2018. num. 9, p. 110-119. DOI : 10.1021/acs.jpclett.7b02818.

2017

Control of the interaction strength of photonic molecules by nanometer precise 3D fabrication

C. D. Rawlings; M. Zientek; M. Spieser; D. Urbonas; T. Stöferle et al. 

Scientific Reports. 2017. Vol. 7, num. 1, p. 16502. DOI : 10.1038/s41598-017-16496-x.

Nanopatterning of a Stimuli-Responsive Fluorescent Supramolecular Polymer by Thermal Scanning Probe Lithography

S. T. Zimmermann; D. W. H. Balkenende; A. Lavrenova; C. Weder; J. Brugger 

ACS Applied Materials and Interfaces. 2017. Vol. 9, num. 47, p. 41454-41461. DOI : 10.1021/acsami.7b13672.

Planar Optical Nanoantennas Resolve Cholesterol-Dependent Nanoscale Heterogeneities in the Plasma Membrane of Living Cells

R. Regmi; P. M. Winkler; V. Flauraud; K. J. E. Borgman; C. Manzo et al. 

Nano Letters. 2017. Vol. 17, num. 10, p. 6295-6302. DOI : 10.1021/acs.nanolett.7b02973.

Shape Memory Micro- and Nanowire Libraries for the High-Throughput Investigation of Scaling Effects

T. Oellers; D. Koenig; A. Kostka; S. Xie; J. Brugger et al. 

Acs Combinatorial Science. 2017. Vol. 19, num. 9, p. 574-584. DOI : 10.1021/acscombsci.7b00065.

In-Plane Plasmonic Antenna Arrays with Surface Nanogaps for Giant Fluorescence Enhancement

V. Flauraud; R. Regmi; P. M. Winkler; D. T. L. Alexander; H. Rigneault et al. 

Nano Letters. 2017. Vol. 17, num. 3, p. 1703-1710. DOI : 10.1021/acs.nanolett.6b04978.

Transient Nanoscopic Phase Separation in Biological Lipid Membranes Resolved by Planar Plasmonic Antennas

P. M. Winkler; R. Regmi; V. Flauraud; J. Brugger; H. Rigneault et al. 

ACS Nano. 2017. Vol. 11, num. 7, p. 7241-7250. DOI : 10.1021/acsnano.7b03177.

Mode Coupling in Plasmonic Heterodimers Probed with Electron Energy Loss Spectroscopy

V. Flauraud; G. D. Bernasconi; J. Butet; D. T. L. Alexander; O. J. F. Martin et al. 

ACS Nano. 2017. Vol. 11, num. 4, p. 3485-3495. DOI : 10.1021/acsnano.6b08589.

Mode Evolution in Strongly Coupled Plasmonic Dolmens Fabricated by Templated Assembly

V. Flauraud; G. D. Bernasconi; J. Butet; M. Mastrangeli; D. T. L. Alexander et al. 

ACS Photonics. 2017. Vol. 4, num. 7, p. 1661-1668. DOI : 10.1021/acsphotonics.6b01026.

Growth Of Organic Semiconductor Thin Films with Multi-Micron Domain Size and Fabrication of Organic Transistors Using a Stencil Nanosieve

P. Fesenko; V. Flauraud; S. Xie; E. Kang; T. Uemura et al. 

ACS Applied Materials & Interfaces. 2017. Vol. 9, num. 28, p. 23314–23318. DOI : 10.1021/acsami.7b06584.

Silicon nanostructures for bright field full color prints

V. Flauraud; M. Reyes; R. Paniagua-Dominguez; A. Kuznetsov; J. Brugger 

ACS Photonics. 2017. Vol. 4, num. 8, p. 1913-1919. DOI : 10.1021/acsphotonics.6b01021.

High-aspect ratio nanopatterning via combined thermal scanning probe lithography and dry etching

Y. Lisunova; M. Spieser; R. Juttin; F. Holzner; J. Brugger 

Microelectronic Engineering. 2017. Vol. 180, p. 20-24. DOI : 10.1016/j.mee.2017.04.006.

Single-chip electron spin resonance detectors operating at 50 GHz, 92 GHz, and 146 GHz

A. V. Matheoud; G. Gualco; M. Jeong; I. Zivkovic; J. Brugger et al. 

Journal of Magnetic Resonance. 2017. Vol. 278, p. 113-121. DOI : 10.1016/j.jmr.2017.03.013.

High sensitivity field asymmetric ion mobility spectrometer

M. A. Chavarria; A. V. Matheoud; P. Marmillod; Y. Liu; D. Kong et al. 

Review of Scientific Instruments. 2017. Vol. 88, num. 3, p. 035115-1-035115-13. DOI : 10.1063/1.4978960.

Penciling a triboelectric nanogenerator on paper for autonomous power MEMS applications

X. Zhang; M. Su; J. Brugger; B. Kim 

Nano Energy. 2017. Vol. 33, p. 393-401. DOI : 10.1016/j.nanoen.2017.01.053.

NMR spectroscopy of single sub-nL ova with inductive ultra-compact single-chip probes

M. Grisi; F. Vincent; B. Volpe; R. Guidetti; N. Harris et al. 

Scientific Reports. 2017. Vol. 7, p. 44670. DOI : 10.1038/srep44670.

Nanoscale topographical control of capillary assembly of nanoparticles

V. Flauraud; M. Mastrangeli; G. D. Bernasconi; J. Butet; D. T. L. Alexander et al. 

Nature Nanotechnology. 2017. Vol. 12, num. 1, p. 73-80. DOI : 10.1038/nnano.2016.179.

2016

Arrays of Pentacene Single Crystals by Stencil Evaporation

P. Fesenko; V. Flauraud; S. Xie; J. Brugger; J. Genoe et al. 

Crystal Growth & Design. 2016. Vol. 16, p. 4694−4700. DOI : 10.1021/acs.cgd.6b00765.

Plasmonic photo-current in freestanding monolayered gold nanoparticle membranes

M. Gauvin; T. Alnasser; E. Terver; I. Abid; A. Mlayah et al. 

Nanoscale. 2016. Vol. 8, num. 36, p. 16162-16167. DOI : 10.1039/c6nr05091c.

Scanning thermal probe microscope method for the determination of thermal diffusivity of nanocomposite thin films

D. Varandani; K. Agarwal; J. Brugger; B. R. Mehta 

Review Of Scientific Instruments. 2016. Vol. 87, num. 8, p. 084903. DOI : 10.1063/1.4960332.

A low-power high-sensitivity single-chip receiver for NMR microscopy

J. Anders; J. Handwerker; M. Ortmanns; G. Boero 

Journal Of Magnetic Resonance. 2016. Vol. 266, p. 41-50. DOI : 10.1016/j.jmr.2016.03.004.

Exploring Nanoscale Electrical Properties of CuO-Graphene Based Hybrid Interfaced Memory Device by Conductive Atomic Force Microscopy

B. Singh; B. Mehta; D. Varandani; A. V. Savu; J. Brugger 

Journal of Nanoscience and Nanotechnology. 2016. Vol. 16, num. 4, p. 4044-4051. DOI : 10.1166/jnn.2016.10713.

Electro-mechanical sensing in freestanding monolayered gold nanoparticle membranes

M. Gauvin; J. Grisolia; T. Alnasser; B. Viallet; S. Xie et al. 

Nanoscale. 2016. Vol. 8, num. 22, p. 11363-11370. DOI : 10.1039/C6NR02004F.

Bi-directional AC electrothermal micropump for on-chip biological applications

R. H. Vafaie; H. B. Ghavifekr; H. Van Lintel; J. Brugger; P. Renaud 

ELECTROPHORESIS. 2016. Vol. 37, num. 5-6, p. 719-726. DOI : 10.1002/elps.201500404.

Highly efficient and gentle trapping of single cells in large microfluidic arrays for time-lapse experiments

F. Yesilkoy; R. Ueno; B. Desbiolles; M. Grisi; Y. Sakai et al. 

Biomicrofluidics – Fundamentals, Perspectives & Applications. 2016. Vol. 10, num. 1, p. 014120. DOI : 10.1063/1.4942457.

3D nanostructures fabricated by advanced stencil lithography

F. Yesilkoy; V. Flauraud; M. Rüegg; B. Kim; J. Brugger 

Nanoscale. 2016. Vol. 9, p. 4945-4950. DOI : 10.1039/C5NR08444J.

Rapid carbon nanotubes suspension in organic solvents using organosilicon polymers

F. Dalcanale; J. Grossenbacher; G. Blugan; M. Gullo; J. Brugger et al. 

Journal of Colloid and Interface Science. 2016. Vol. 470, num. 15, p. 123-131. DOI : 10.1016/j.jcis.2016.02.050.

A silk-fibroin-based transparent triboelectric generator suitable for autonomous sensor network

X. Zhang; J. Brugger; B. Kim 

Nano Energy. 2016. Vol. 20, p. 37-47. DOI : 10.1016/j.nanoen.2015.11.036.

Antibacterial Au nanostructured surfaces

S. Wu; F. Zuber; J. Brugger; K. Maniura-Weber; Q. Ren 

Nanoscale. 2016. Vol. 8, num. 5, p. 2620-2625. DOI : 10.1039/C5NR06157A.

Harnessing the damping properties of materials for high-speed atomic force microscopy

J. Adams; B. Erickson; J. Grossenbacher; J. Brugger; A. P. Nievergelt et al. 

Nature Nanotechnology. 2016. Vol. 11, p. 147-151. DOI : 10.1038/NNANO.2015.254.

2015

Organic-inorganic-hybrid-polymer microlens arrays with tailored optical characteristics and multi-focal properties

L. Jacot-Descombes; V. J. Cadarso; A. Schleunitz; S. Gruetzner; J. J. Klein et al. 

Optics Express. 2015. Vol. 23, num. 19, p. 25365-25376. DOI : 10.1364/OE.23.025365.

Electrical Property of Platinum Micro Heater for Thermal Analysis of Microfluidic Device

R. Ueno; F. Yesilköy; J. Brugger; B. Kim 

IEEJ Transactions on Sensors and Micromachines. 2015. Vol. 135, num. 8, p. 338-342. DOI : 10.1541/ieejsmas.135.338.

Large-Scale Arrays of Bowtie Nanoaperture Antennas for Nanoscale Dynamics in Living Cell Membranes

V. Flauraud; T. S. van Zanten; M. Mivelle; C. Manzo; M. F. Garcia Parajo et al. 

Nano Letters. 2015. Vol. 15, num. 6, p. 4176-4182. DOI : 10.1021/acs.nanolett.5b01335.

Cytotoxicity evaluation of polymer-derived ceramics for pacemaker electrode applications

J. Grossenbacher; M. Gullo; F. Dalcanale; G. Blugan; J. Kuebler et al. 

Journal of Biomedical Materials Research Part A. 2015. Vol. 103, num. 11, p. 3625-3632. DOI : 10.1002/jbm.a.35477.

A broadband single-chip transceiver for multi-nuclear NMR probes

M. Grisi; G. Gualco; G. Boero 

Review Of Scientific Instruments. 2015. Vol. 86, num. 4, p. 044703. DOI : 10.1063/1.4916206.

Impedance sensing of DNA immobilization and hybridization by microfabricated alumina nanopore membranes

S. Wu; W. Ye; M. Yang; M. Taghipoor; R. Meissner et al. 

Sensors and Actuators B: Chemical. 2015. Vol. 216, p. 105-112. DOI : 10.1016/j.snb.2015.03.094.

CNT and PDCs: A fruitful association? Study of a polycarbosilane–MWCNT composite

F. Dalcanale; J. Grossenbacher; G. Blugan; M. R. Gullo; J. Brugger et al. 

Journal of the European Ceramic Society. 2015. Vol. 35, num. 8, p. 2215-2224. DOI : 10.1016/j.jeurceramsoc.2015.02.016.

Composite hydrogel-loaded alumina membranes for nanofluidic molecular filtration

S. Wu; T. M. Braschler; R. Anker; F. Wildhaber; A. Bertsch et al. 

Journal of Membrane Science. 2015. Vol. 477, num. 1, p. 151-156. DOI : 10.1016/j.memsci.2014.12.023.

On the micrometre precise mould filling of liquid polymer derived ceramic precursor for 300-µm-thick high aspect ratio ceramic MEMS

J. Grossenbacher; R. M. Gullo; V. Bakumov; G. Blugan; J. Kuebler et al. 

Ceramics International. 2015. Vol. 41, num. 1, p. 623-629. DOI : 10.1016/j.ceramint.2014.08.112.

1996

Production of antihydrogen

G. Baur; G. Boero; A. Brauksiepe; A. Buzzo; W. Eyrich et al. 

Physics Letters B. 1996. Vol. 368, num. 3, p. 251-258. DOI : 10.1016/0370-2693(96)00005-6.

The internal Xe-jet target for the formation of antihydrogen (H̄) atoms at CERN LEAR

G. Boero; M. Lovetere; M. Macrí; S. Passaggio; A. Pozzo 

Nuovo Cimento della Societa Italiana di Fisica A. 1996. Vol. 109, num. 11, p. 1581-1590. DOI : 10.1007/BF02778241.

Scanning force microscopy in the dynamic mode using microfabricated capacitive sensors

N. Blanc; J. Brugger; N. F. de Rooij; U. Duerig 

Journal of Vacuum Science & Technology B. 1996. Vol. 14, num. 2, p. 901-905. DOI : 10.1116/1.589171.

1997

Production of antihydrogen in relativistic collisions

G. Baur; G. Boero; S. Brauksiepe; A. Buzzo; W. Eyrich et al. 

Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 1997. Vol. 391, num. 1, p. 201-204. DOI : 10.1016/S0168-9002(96)01197-7.

A high-flow hydrogen dissociator based on a surface-wave discharge

G. Boero; W. Kubischta; P. Leprince 

Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 1997. Vol. 398, num. 2-3, p. 157-161. DOI : 10.1016/S0168-9002(97)00823-1.

Observation of antihydrogen production in flight at CERN

W. Oelert; G. Baur; G. Boero; S. Brauksiepe; A. Buzzo et al. 

Hyperfine Interactions. 1997. Vol. 109, num. 1-4, p. 191-203. DOI : 10.1023/A:1012609601849.

Silicon Micro/Nanomechanical Device Fabrication Based on Focused Ion Beam Surface Modification and KOH Etching

J. Brugger; G. Beljakovic; M. Despont; N. F. de Rooij; P. Vettiger 

Microeleetronic Engineering. 1997. Vol. 35, p. 401-404. DOI : 10.1016/S0167-9317(96)00210-9.

1998

An NMR magnetometer with planar microcoils and integrated electronics for signal detection and amplification

G. Boero; C. de Raad Iseli; P. Besse; R. Popovic 

SENSORS AND ACTUATORS A-PHYSICAL. 1998. Vol. 67, num. 1-3, p. 18-23. DOI : 10.1016/S0924-4247(97)01722-6.

The variable density gas jet internal target for Experiment 835 at Fermilab

D. Allspach; A. Hahn; C. Kendziora; S. Pordes; G. Boero et al. 

Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 1998. Vol. 410, num. 2, p. 195-205. DOI : 10.1016/S0168-9002(98)00236-8.

Piezoresistive cantilever designed for torque magnetometry

M. Willemin; C. Rossel; J. Brugger; M. Despont; H. Rothuizen et al. 

Journal of Applied Physics. 1998. Vol. 83, num. 3, p. 1163. DOI : 10.1063/1.366811.

High-aspect-ratio, ultrathick, negative-tone near-UV photoresist and its applications for MEMS

H. Lorenz; M. Despont; N. Fahrni; J. Brugger; P. Vettiger et al. 

Sensors and Actuators A: physical. 1998. Vol. 64, num. 1, p. 33-39. DOI : 10.1016/S0924-4247(98)80055-1.

Sequential position readout from arrays of micromechanical cantilever sensors

H. P. Lang; R. Berger; A. Andreoli; J. Brugger; M. Despont et al. 

Applied Physics Letters. 1998. Vol. 72, num. (3), p. 383-385. DOI : 10.1063/1.120749.

A chemical sensor based on amicromechanical cantilever array for the identification of gases and vapors

H. P. Lang; R. Berger; F. Battiston; J. P. Ramseyer; E. Meyer et al. 

Appl. Phys. A. 1998. Vol. 66, num. 7, p. S61-S64. DOI : 10.1007/s003390051100.

Low-cost PDMS seal ring for single-side wet etching of MEMS structures

J. Brugger; G. Beljakovic; M. Despont; H. Biebuyck; N. F. de Rooij et al. 

Sensors and Actuators A. 1998. Vol. 70, num. 1-2, p. 191-194. DOI : 10.1016/S0924-4247(98)00132-0.

Characterization of an integrated force sensor based on a MOS transistor for applications in scanning force microscopy

T. Akiyama; A. Tonin; H. Hidber; J. Brugger; P. Vettiger et al. 

Sensors and Actuators A. 1998. Vol. 64, num. 1, p. 1-6. DOI : 10.1016/S0924-4247(98)80051-4.

2000

Realised examples of microsystems and their applications

P. Besse; C. Schott; G. Boero; F. Borger; R. Popovic 

Measurement and Control. 2000. Vol. 33, num. 9, p. 261-264. DOI : 10.1177/002029400003300902.

2001

Fully integrated probe for proton nuclear magnetic resonance magnetometry

G. Boero; J. Frounchi; B. Furrer; P. Besse; R. Popovic 

Review of Scientific Instruments. 2001. Vol. 72, num. 6, p. 2764-2768. DOI : 10.1063/1.1374599.

Hall detection of magnetic resonance

G. Boero; P. Besse; R. Popovic 

Applied Physics Letters. 2001. Vol. 79, num. 10, p. 1498-1500. DOI : 10.1063/1.1399306.

Direct integration of micromachined pipettes in a flow channel for single DNA molecule study by optical tweezers

C. Rusu; R. van’t Oever; M. de Boer; H. Jansen; E. Berenschot et al. 

IEEE Journal of Microelectromechanical Systems. 2001. Vol. 10, num. 2, p. 238-246. DOI : 10.1109/84.925758.

A self-assembled monolayer-assisted surface microfabrication and release technique

B. J. Kim; M. Liebau; J. Huskens; D. N. Reinhoudt; J. Brugger 

Microelectronic Engineering. 2001. Vol. 57-58, p. 755-760. DOI : 10.1016/S0167-9317(01)00469-5.

Moulded photoplastic probes for near-field optical applications

B. J. Kim; J. W. Flamma; E. S. ten Have; M. F. Garcia-Parajo; N. F. van Hulst et al. 

Journal of Microscopy. 2001. Vol. 202, num. 1, p. 16-21. DOI : 10.1046/j.1365-2818.2001.00820.x.

2002

Detection of a single magnetic microbead using a miniaturized silicon Hall sensor

P-A. Besse; G. Boero; M. Demierre; V. Pott; R. Popovic 

Applied Physics Letters. 2002. Vol. 80, num. 22, p. 4199-4201. DOI : 10.1063/1.1483909.

High-Q factor RF planar microcoils for micro-scale NMR spectroscopy

C. Massin; G. Boero; F. Vincent; J. Abenhaim; P-A. Besse et al. 

Sensors and Actuators, A: Physical. 2002. Vol. 97-98, p. 280-288. DOI : 10.1016/S0924-4247(01)00847-0.

Surface Modification With Self-Assembled Monolayers for Nanoscale Replication of Photoplastic MEMS

G. M. Kim; B. J. Kim; M. Liebau; J. Huskens; D. N. Reinhoudt et al. 

IEEE Journal of Microelectromechanical Systems. 2002. Vol. 11, num. 3, p. 175-181. DOI : 10.1109/JMEMS.2002.1007395.

Electrical properties of light-addressed sub-µm electrodes fabricated by use of nanostencil-technology

V. Bucher; J. Brugger; D. Kern; G. M. Kim; M. Schubert et al. 

Microelectronic Engineering. 2002. Vol. 61–62, p. 971-980. DOI : 10.1016/S0167-9317(02)00422-7.

Shadow-mask evaporation through monolayer-modified nanostencils

M. Kolbel; R. Tjerkstra; J. Brugger; C. van Rijn; W. Nijdam et al. 

Nano Letters. 2002. Vol. 2, num. 12, p. 1339-1343. DOI : 10.1021/nl025784o.

Replication molds having nanometer-scale shape control fabricated by means of oxidation and etching

G. Kim; A. Kovalgin; J. Holleman; J. Brugger 

Journal of Nanoscience and Nanotechnology. 2002. Vol. 2, num. 1, p. 55-59. DOI : 10.1166/jnn.2002.073.

2003

Micro-Hall devices: performance, technologies and applications

G. Boero; M. Demierre; P. Besse; R. Popovic 

SENSORS AND ACTUATORS A-PHYSICAL. 2003. Vol. 106, num. 1-3, p. 314-320. DOI : 10.1016/S0924-4247(03)00192-4.

Electron-spin resonance probe based on a 100 mu m planar microcoil

G. Boero; M. Bouterfas; C. Massin; F. Vincent; P. Besse et al. 

Review of Scientific Instruments. 2003. Vol. 74, num. 11, p. 4794-4798. DOI : 10.1063/1.1621064.

Planar microcoil-based microfluidic NMR probes

C. Massin; F. Vincent; A. Homsy; K. Ehrmann; G. Boero et al. 

Journal of Magnetic Resonance. 2003. Vol. 164, num. 2, p. 242-255. DOI : 10.1016/S1090-7807(03)00151-4.

Self-Assembled Monolayer Coatings on Nanostencils for the Reduction of Materials Adhesion

M. Koelbel; R. W. Tjerkstra; G. M. Kim; J. Brugger; C. J. M. van Rijn et al. 

Advanced Functional Materials. 2003. Vol. 13, num. 3, p. 219-224. DOI : 10.1002/adfm.200390033.

All-photoplastic microstencil with self-alignment for multiple layer shadow-mask patterning

G. M. Kim; B. J. Kim; J. Brugger 

Sensors and Actuators A. 2003. Vol. 107, num. 2, p. 132-136. DOI : 10.1016/S0924-4247(03)00298-X.

Size-dependent free solution DNA electrophoresis in structured microfluidic systems

T. Duong; G. Kim; R. Ros; M. Streek; F. Schmid et al. 

Microelectronic Engineering. 2003. Vol. 67-8, p. 905-912. DOI : 10.1016/S0167-9317(03)00153-9.

Fabrication and application of a full wafer size micro/nanostencil for multiple length-scale surface patterning

G. Kim; M. van den Boogaart; J. Brugger 

Microelectronic Engineering. 2003. Vol. 67-68, p. 609-614. DOI : 10.1016/S0167-9317(03)00121-7.

Fabrication of functional structures on thin silicon nitride membranes

P. Ekkels; R. Tjerkstra; G. Krijnen; J. Berenschot; J. Brugger et al. 

Microelectronic Engineering. 2003. Vol. 67-8, p. 422-429. DOI : 10.1016/S0167-9317(03)00098-4.

Photoplastic near-field optical probe with sub-100 nm aperture made by replication from a nanomould

G. Kim; B. Kim; E. Ten Have; F. Segerink; N. Van Hulst et al. 

Journal of Microscopy. 2003. Vol. 209, num. 3, p. 267-271. DOI : 10.1046/j.1365-2818.2003.01134.x.

2005

Superparamagnetic microbead inductive detector

M. Lany; G. Boero; R. Popovic 

Review of Scientific Instruments. 2005. Vol. 76, num. 8, p. 084301. DOI : 10.1063/1.1988131.

X-ray ferromagnetic resonance spectroscopy

G. Boero; S. Rusponi; P. Bencok; R. S. Popovic; H. Brune et al. 

Applied Physics Letters. 2005. Vol. 87, num. 15, p. 1-3. DOI : 10.1063/1.2089180.

Microscopic four-point probe based on SU-8 cantilevers

S. Keller; S. Mouaziz; G. Boero; J. Brugger 

Virtual Journal of Nanoscale Science & Technology. 2005. Vol. 12, num. 26.

Microscopic four-point probe based on SU-8 cantilevers

S. Keller; S. Mouaziz; G. Boero; J. Brugger 

Review of Scientific Instruments. 2005. Vol. 76, num. 12, p. 125102 (4 pages). DOI : 10.1063/1.2140443.

Submicrometer Hall devices fabricated by focused electron-beam-induced deposition

G. Boero; I. Utke; T. Bret; N. Quack; M. Todorova et al. 

Virtual Journal of Nanoscale Science & Technology. 2005. Vol. 86, p. 042503.

Micromechanical testing of SU-8 cantilevers

M. Hopcroft; T. Kramer; G. Kim; K. Takashima; Y. Higo et al. 

Fatigue and Fracture of Engineering Materials and Structures. 2005. Vol. 28, num. 8, p. 735-742. DOI : 10.1111/j.1460-2695.2005.00873.x.

Complex oxide nanostructures by pulsed laser deposition through nanostencils

C. Cojocaru; C. Harnagea; F. Rosei; A. Pignolet; M. van den Boogaart et al. 

Applied Physics Letters. 2005. Vol. 86, num. 18, p. 183107 (3 pages). DOI : 10.1063/1.1923764.

Submicrometer Hall devices fabricated by focused electron-beam-induced deposition

G. Boero; I. Utke; T. Bret; N. Quack; M. Todorova et al. 

Applied Physics Letters. 2005. Vol. 86, num. 4, p. 042503 (3 pages). DOI : 10.1063/1.1856134.

MEMS tools for combinatorial materials processing and high-throughput characterization

A. Ludwig; J. Cao; J. Brugger; I. Takeuchi 

Measurement Science and Technology. 2005. Vol. 16, num. 1, p. 111-118. DOI : 10.1088/0957-0233/16/1/015.

2006

Polymer-based cantilevers with integrated electrodes

S. Mouaziz; G. Boero; R. S. Popovic; J. Brugger 

IEEE Journal of Microelectromechanical Systems. 2006. Vol. 15, num. 4, p. 890-895. DOI : 10.1109/JMEMS.2006.879376.

Micro- and nanostructured devices for investigating biomolecular interactions

C. Danelon; M. Jenke; C. Schreiter; G. Kim; J-B. Perez et al. 

Chimia. 2006. Vol. 60, num. 11, p. 754-760. DOI : 10.2533/chimia.2006.754.

Fabrication and functionalization of nanochannels by electron-beam-induced silicon oxide deposition

C. Danelon; C. Santschi; J. Brugger; H. Vogel 

Langmuir. 2006. Vol. 22, num. 25, p. 10711-10715. DOI : 10.1021/la061321c.

Surface Micromachining of Polyureasilazane Based Ceramic-MEMS using SU-8 Micromolds

V. Fakhfouri; S. Jiguet; J. Brugger 

Advances in Science and Technology. 2006. Vol. 45, p. 1293-1298. DOI : 10.4028/www.scientific.net/AST.45.1293.

Silicon Supported Membranes for Improved Large-Area and High-Density Micro/Nanostencil Lithography

M. A. F. van den Boogaart; L. M. Doeswijk; J. Brugger 

IEEE Journal of Microelectromechanical Systems. 2006. Vol. 15, num. 6, p. 1663-1670. DOI : 10.1109/JMEMS.2006.885981.

Reverse transfer of nanostencil patterns using intermediate sacrificial layer and lift-off process

C. W. Park; O. Vazquez Mena; M. A. F. van den Boogaart; J. Brugger 

Journal of Vacuum Science and Technology B. 2006. Vol. 24, num. 6, p. 2772-2775. DOI : 10.1116/1.2366610.

Photoluminescence characterization of few-nanocrystals electronic devices

A. Arbouet; M. Carrada; F. Demangeot; V. Paillard; G. BenAssayag et al. 

Journal of Luminescence. 2006. Vol. 121, num. 2, p. 340-343. DOI : 10.1016/j.jlumin.2006.08.070.

Permalloy thin films exchange coupled to arrays of cobalt islands

A. Fraile Rodriguez; L. J. Heyderman; F. Nolting; A. Hoffmann; J. E. Pearson et al. 

Applied Physics Letters. 2006. Vol. 89, num. 14, p. 142508. DOI : 10.1063/1.2357007.

Tuning the Dimensions and Periodicities of Nanostructures Starting from the Same Polystyrene-block-poly(2-vinylpyridine) Diblock Copolymer

S. Krishnamoorthy; R. Pugin; J. Brugger; H. Heinzelmann; C. Hinderling 

Advanced Functional Materials. 2006. Vol. 16, num. 11, p. 1469-1475. DOI : 10.1002/adfm.200500524.

Formation of Metal Nano- and Micro-patterns on Self-Assembled Monolayers Using Pulsed Laser Deposition through Nanostencils and Electroless Deposition

E. A. Speets; P. te Riele; M. A. F. van den Boogaart; L. M. Doeswijk; B. J. Ravoo et al. 

Advanced Functional Materials. 2006. Vol. 16, num. 10, p. 1337-1342. DOI : 10.1002/adfm.200500933.

Corrugated membranes for improved pattern definition with micro/nanostencil lithography

M. A. F. van den Boogaart; M. Lishchynska; L. M. Doeswijk; J. C. Greer; J. Brugger 

Sensors and Actuators A. 2006. Vol. 130-131, p. 568-574. DOI : 10.1016/j.sna.2005.08.037.

Fabrication of metallic patterns by microstencil lithography on polymer surfaces suitable as microelectrodes in integrated microfluidic systems

N. Takano; L. M. Doeswijk; M. A. F. van den Boogaart; J. Auerswald; H. F. Knapp et al. 

Journal of Micromechanics and Microengineering. 2006. Vol. 16, num. 8, p. 1606-1613. DOI : 10.1088/0960-1317/16/8/023.

Interdigital 50 nm Ti Electrode Arrays Fabricated Using XeF2 Enhanced Focused Ion Beam Etching

C. Santschi; M. Jenke; P. Hoffmann; J. Brugger 

Nanotechnology. 2006. Vol. 17, num. 11, p. 2722-2729. DOI : 10.1088/0957-4484/17/11/002.

Combined Al-protection and HF-vapor release process for ultrathin single crystal silicon cantilevers

S. Mouaziz; G. Boero; G. Moresi; C. Degen; Q. Lin et al. 

Microelectronic Engineering. 2006. Vol. 83, num. 4-9, p. 1306-1308. DOI : 10.1016/j.mee.2006.01.218.

Block copolymer micelles as switchable templates for nanofabrication

S. Krishnamoorthy; R. Pugin; J. Brugger; H. Heinzelmann; A. C. Hoogerwerf et al. 

Langmuir. 2006. Vol. 22, num. 8, p. 3450-3452. DOI : 10.1021/la052299a.

Electrically conducting probes with full tungsten cantilever and tip for scanning probe applications

J. A. J. Steen; J. Hayakawa; T. Harada; K. Lee; F. Calame et al. 

Nanotechnology. 2006. Vol. 17, num. 5, p. 1464-1469. DOI : 10.1088/0957-4484/17/5/050.

Cell Membranes Suspended Across Nanoaperture Arrays

C. Danelon; J-B. Perez; C. Santschi; J. Brugger; H. Vogel 

Langmuir. 2006. Vol. 22, num. 1, p. 22-25. DOI : 10.1021/la052387v.

2014

Polymeric variable optical attenuators based on magnetic sensitive stimuli materials

S. De Pedro; V. J. Cadarso; T. N. Ackermann; X. Munoz-Berbel; J. A. Plaza et al. 

Journal Of Micromechanics And Microengineering. 2014. Vol. 24, num. 12, p. 125008. DOI : 10.1088/0960-1317/24/12/125008.

Frequency jumps in single chip microwave LC oscillators

G. Gualco; M. Grisi; G. Boero 

Applied Physics Letters. 2014. Vol. 105, num. 24, p. 242102. DOI : 10.1063/1.4904417.

Cryogenic single-chip electron spin resonance detector

G. Gualco; J. Anders; A. Sienkiewicz; S. Alberti; L. Forro et al. 

Journal of Magnetic Resonance. 2014. Vol. 247, p. 96-103. DOI : 10.1016/j.jmr.2014.08.013.

Microdrop generation and deposition of ionic liquids

V. J. Cadarso; J. Perera-Nunez; A. Mendez-Vilas; L. Labajos-Broncano; M-L. Gonzalez-Martin et al. 

Journal Of Materials Research. 2014. Vol. 29, num. 17, p. 2100-2107. DOI : 10.1557/jmr.2014.162.

Direct imprinting of organic-inorganic hybrid materials into high aspect ratio sub-100 nm structures

V. J. Cadarso; T. Kiefer; V. Auzelyte; H. Atasoy; G. Gruetzner et al. 

Microsystem Technologies-Micro-And Nanosystems-Information Storage And Processing Systems. 2014. Vol. 20, num. 10-11, p. 1961-1966. DOI : 10.1007/s00542-013-2016-4.

Inkjet printed superparamagnetic polymer composite hemispheres with programmed magnetic anisotropy

O. Ergeneman; C. Peters; M. R. Gullo; L. Jacot-Descombes; S. Gervasoni et al. 

Nanoscale. 2014. Vol. 6, p. 10495-10499. DOI : 10.1039/C3NR06442E.

PDMS-based, magnetically actuated variable optical attenuators obtained by soft lithography and inkjet printing technologies

S. De Pedro; V. J. Cadarso; X. Munoz-Berbel; J. A. Plaza; J. Sort et al. 

Sensors And Actuators A-Physical. 2014. Vol. 215, p. 30-35. DOI : 10.1016/j.sna.2014.01.021.

Inkjet Printing of High Aspect Ratio Superparamagnetic SU-8 Microstructures with Preferential Magnetic Directions

L. Jacot-Descombes; M. R. Gullo; V. J. Cadarso; M. Mastrangeli; O. Ergeneman et al. 

Micromachines. 2014. Vol. 5, p. 583-593. DOI : 10.3390/mi5030583.

Fabrication of HepG2 Cell Laden Collagen Microspheres using Inkjet Printing

J. Ho Choi; Y. Ho Kim; L. Jacot-Descombes; J. Brugger; G. Man Kim 

Journal of the Korean Society for Precision Engineering. 2014. Vol. 31, num. 8, p. 743-747. DOI : 10.7736/KSPE.2014.31.8.743.

UV-Imprint Resists Generated from Polymerizable Ionic Liquids and Titania Nanoparticles

A. Gopakumar; Z. Fei; E. Paunescu; V. Auzelyte; J. Brugger et al. 

The Journal of Physical Chemistry. 2014. Vol. 118, p. 16743−16748. DOI : 10.1021/jp412722y.

Influence of carbon enrichment on electrical conductivity and processing of polycarbosilane derived ceramic for MEMS applications

F. Dalcanale; J. Grossenbacher; G. Blugan; R. M. Gullo; A. Lauria et al. 

Journal of the European Ceramic Society. 2014. Vol. 34, num. 15, p. 3559-3570. DOI : 10.1016/j.jeurceramsoc.2014.06.002.

Curved Holographic Combiner for Color Head Worn Display

M. Guillaumee; S. P. Vahdati; E. Tremblay; A. Mader; G. Bernasconi et al. 

Journal Of Display Technology. 2014. Vol. 10, num. 6, p. 444-449. DOI : 10.1109/Jdt.2013.2277933.

Three-dimensional polymeric microtiles for optically-tracked fluidic self-assembly

M. Mastrangeli; A. Martinoli; J. Brugger 

Microelectronic Engineering. 2014. Vol. 124, p. 1-7. DOI : 10.1016/j.mee.2014.04.017.

UV-patternable polymers with selective spectral response (vol 98, pg 234, 2013)

S. De Pedro; A. Voigt; V. J. Cadarso; J. Vila-Planas; J. Brugger et al. 

Microelectronic Engineering. 2014. Vol. 115, p. 1-1. DOI : 10.1016/j.mee.2013.10.019.

Cell force measurements in 3D microfabricated environments based on compliant cantilevers

M. Marelli; N. Gadhari; G. Boero; M. Chiquet; J. Brugger 

Lab on a Chip. 2014. Vol. 14, num. 2, p. 286-293. DOI : 10.1039/c3lc51021b.

2013

Preface: Special Issue: Euromat 2011-European Congress and Exhibition on Advanced Materials and Processes: Symposium A53 MEMS/NEMS for Sensorial and Actorial Materials

D. Lehmhus; J. Brugger; P. Muralt; S. Pane; O. Ergeneman et al. 

Journal Of Intelligent Material Systems And Structures. 2013. Vol. 24, num. 18, p. 2171-2171. DOI : 10.1177/1045389X13507157.

Acousto-fluidic system assisting in-liquid self-assembly of microcomponents

J. Goldowsky; M. Mastrangeli; L. Jacot-Descombes; R. M. Gullo; G. Mermoud et al. 

Journal of Micromechanics and Microengineering. 2013. Vol. 23, num. 12, p. 125026. DOI : 10.1088/0960-1317/23/12/125026.

Cell shape-dependent early responses of fibroblasts to cyclic strain

N. Gadhari; M. Chamley; M. Marelli; J. Brugger; M. Chiquet 

Biochimica et Biophysica Acta (BBA) – Molecular Cell Research. 2013. Vol. 1833, num. 12, p. 3415-3425. DOI : 10.1016/j.bbamcr.2013.10.012.

Simulation of Electrical Discharge Initiated by a Nanometer-Sized Probe in Atmospheric Conditions

R. Chen; C. Chen; Y. Liu; H. Wang; Y. Ma et al. 

Plasma Science & Technology. 2013. Vol. 15, num. 9, p. 845. DOI : 10.1088/1009-0630/15/9/02.

Single Superparamagnetic Bead Detection and Direct Tracing of Bead Position Using Novel Nanocomposite Nano-Hall Sensors

M. S. Gabureac; L. Bernau; G. Boero; I. Utke 

Ieee Transactions On Nanotechnology. 2013. Vol. 12, num. 5, p. 668-673. DOI : 10.1109/Tnano.2013.2266733.

Resistless Fabrication of Nanoimprint Lithography (NIL) Stamps Using Nano-Stencil Lithography

L. G. Villanueva; O. Vazquez-Mena; C. Martin-Olmos; A. V. Savu; K. Sidler et al. 

Micromachines. 2013. Vol. 4, p. 370-377. DOI : 10.3390/mi4040370.

Stencil-Nanopatterned Back Reflectors for Thin-Film Amorphous Silicon n-i-p Solar Cells

C. Pahud; V. Savu; M. Klein; O. Vazquez-Mena; F-J. Haug et al. 

Ieee Journal Of Photovoltaics. 2013. Vol. 3, num. 1, p. 22-26. DOI : 10.1109/Jphotov.2012.2213583.

Application of stencil masks for ion beam lithographic patterning

S. Brun; V. Savu; S. Schintke; E. Guibert; H. Keppner et al. 

Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms. 2013. Vol. 306, p. 292-295. DOI : 10.1016/j.nimb.2012.12.064.

Special Issue on Selected Papers From the 11th IEEE Sensors Conference 2012

W. Fang; M. Esashi; R. Ghodssi; J. Brugger 

Ieee Sensors Journal. 2013. Vol. 13, num. 8, p. 2809-2809. DOI : 10.1109/Jsen.2013.2268687.

Room temperature strong coupling between a microwave oscillator and an ensemble of electron spins

G. Boero; G. Gualco; R. Lisowski; J. Anders; D. Suter et al. 

Journal Of Magnetic Resonance. 2013. Vol. 231, p. 133-140. DOI : 10.1016/j.jmr.2013.04.004.

Fluid-mediated parallel self-assembly of polymeric micro-capsules for liquid encapsulation and release

L. Jacot-Descombes; C. Martin-Olmos; M. R. Gullo; V. J. Cadarso; G. Mermoud et al. 

Soft Matter. 2013. Vol. 9, p. 9931-9938. DOI : 10.1039/c3sm51923f.

Inkjet-printed SU-8 Hemispherical Microcapsules and Silicon chip Embedding

L. Jacot-Descombes; R. M. Gullo; M. Mastrangeli; V. J. Cadarso; J. Brugger 

IET Micro & Nano Letters. 2013. Vol. 8, num. 10, p. 633-636. DOI : 10.1049/mnl.2013.0241.

High-resolution 1D moirés as counterfeit security features

V. J. Cadarso; S. Chosson; K. Sidler; R. D. Hersch; J. Brugger 

Light: Science & Applications. 2013. Vol. 2, num. 7, p. e86. DOI : 10.1038/lsa.2013.42.

Large-Area Gold/Parylene Plasmonic Nanostructures Fabricated by Direct Nanocutting

V. Auzelyte; B. Gallinet; V. Flauraud; C. Santschi; S. Dutta-Gupta et al. 

Advanced Optical Materials. 2013. Vol. 1, num. 1, p. 50-54. DOI : 10.1002/adom.201200017.

Field effect modulated nanofluidic diode membrane based on Al2O3/W heterogeneous nanopore arrays

S. Wu; F. Wildhaber; A. Bertsch; J. Brugger; P. Renaud 

Applied Physics Letters. 2013. Vol. 102, num. 21, p. 213108.1-4. DOI : 10.1063/1.4807781.

Dynamics of capillary self-alignment for mesoscopic foil devices

G. Arutinov; M. Mastrangeli; E. C. P. Smiths; H. F. M. Schoo; J. Brugger et al. 

Applied Physics Letters. 2013. Vol. 102, p. 144101. DOI : 10.1063/1.4801088.

Simple and easily controllable parabolic-shaped microlenses printed on polymeric mesas

J. Y. Kim; C. Martin-Olmos; N. S. Baek; J. Brugger 

Journal Of Materials Chemistry C. 2013. Vol. 1, num. 11, p. 2152-2157. DOI : 10.1039/c3tc00632h.

Structural and optical properties of the Cu2ZnSnSe4 thin films grown by nano-ink coating and selenization

Y. Liu; D-Y. Kong; H. You; C-L. Chen; X-H. Lin et al. 

Journal Of Materials Science-Materials In Electronics. 2013. Vol. 24, num. 2, p. 529-535. DOI : 10.1007/s10854-012-0970-8.

Integrated long-range thermal bimorph actuators for parallelizable bio-AFM applications

J. Henriksson; R. M. Gullo; J. Brugger 

IEEE Sensors Journal. 2013. Vol. 13, num. 8, p. 2849-2856. DOI : 10.1109/JSEN.2013.2261293.

2009

Conduction in rectangular quasi-one-dimensional and two-dimensional random resistor networks away from the percolation threshold

T. Kiefer; G. Villanueva; J. Brugger 

Physical Review E. 2009. Vol. 80, num. 2, p. 021104. DOI : 10.1103/Physreve.80.021104.

Focused Ion Beam: A Versatile Technique for the Fabrication of Nano-Devices

C. Santschi; J. Przybylska; M. Guillaumee; O. Vazquez-Mena; J. Brugger et al. 

Praktische Metallographie-Practical Metallography. 2009. Vol. 46, num. 3, p. 154-156.

A single-chip array of NMR receivers

J. Anders; G. Chiaramonte; P. SanGiorgio; G. Boero 

Journal Of Magnetic Resonance. 2009. Vol. 201, p. 239-249. DOI : 10.1016/j.jmr.2009.09.019.

Double-resonant x-ray and microwave absorption: Atomic spectroscopy of precessional orbital and spin dynamics

G. Boero; S. Rusponi; P. Bencok; R. Meckenstock; J-U. Thiele et al. 

Physical Review B. 2009. Vol. 79, num. 22, p. 224425. DOI : 10.1103/PhysRevB.79.224425.

Longitudinal detection of ferromagnetic resonance using x-ray transmission measurements

G. Boero; S. Rusponi; J. Kavich; A. L. Rizzini; C. Piamonteze et al. 

Review of Scientific Instruments. 2009. Vol. 80, num. 12, p. 123902. DOI : 10.1063/1.3267192.

Quick and Clean: Stencil Lithography for Wafer-Scale Fabrication of Superconducting Tunnel Junctions

V. Savu; J. Kivioja; J. Ahopelto; J. Brugger 

IEEE Transactions on Applied Superconductivity. 2009. Vol. 19, num. 3, p. 242-244. DOI : 10.1109/TASC.2009.2019075.

Nanotechnology impact on sensors

J. Brugger 

NANOTECHNOLOGY. 2009. Vol. 20, num. 43, p. 430206. DOI : 10.1088/0957-4484/20/43/430206.

99% random telegraph signal-like noise in gold nanoparticle mu-stripes

J. Grisolia; B. Viallet; C. Amiens; S. Baster; A. Cordan et al. 

Nanotechnology. 2009. Vol. 20, num. 35, p. 355303. DOI : 10.1088/0957-4484/20/35/355303.

Analysis of the blurring in stencil lithography

O. Vazquez-Mena; L. G. Villanueva; V. Savu; K. Sidler; P. Langlet et al. 

Nanotechnology. 2009. Vol. 20, num. 41, p. 415303. DOI : 10.1088/0957-4484/20/41/415303.

Microcollimator for Micrometer-Wide Stripe Irradiation of Cells Using 20–30 keV X Rays

K. Pataky; L. G. Villanueva; A. Liani; O. Zgheib; N. Jenkins et al. 

Radiation Research. 2009. Vol. 172, num. 2, p. 252-259. DOI : 10.1667/RR1483.1.

Drop-on-demand inkjet printing of highly luminescent CdS and CdSe@ZnS nanocrystal based nanocomposites

C. Ingrosso; J. Y. Kim; E. Binetti; V. Fakhfouri; M. Striccoli et al. 

Microelectronic Engineering. 2009. Vol. 86, p. 1124-1126. DOI : 10.1016/j.mee.2008.11.028.

Stress and aging minimization in photoplastic AFM probes

C. Martin; A. Llobera; G. Villanueva; A. Voigt; G. Gruetzner et al. 

Microelectronic Engineering. 2009. Vol. 86, num. 4-6, p. 1226-1229. DOI : 10.1016/j.mee.2008.12.033.

Inkjet-Printed Multicolor Arrays of Highly Luminescent Nanocrystal-Based Nanocomposites

J. Y. Kim; C. Ingrosso; V. Fakhfouri; M. Striccoli; A. Agostiano et al. 

Small. 2009. Vol. 5, p. 1051-1057. DOI : 10.1002/smll.200801315.

Drop-On-Demand Inkjet Printing of SU-8 Polymer

V. Fakhfouri; G. Mermoud; J. Y. Kim; A. Martinoli; J. Brugger 

Micro and Nanosystems. 2009. Vol. 1, num. 1, p. 63-67. DOI : 10.2174/1876402910901010063.

Nanomechanical Mass Sensor for Spatially Resolved Ultrasensitive Monitoring of Deposition Rates in Stencil Lithography

J. Arcamone; M. Sansa; J. Verd; A. Uranga; G. Abadal et al. 

Small. 2009. Vol. 5, p. 176-180. DOI : 10.1002/smll.200990007.

An Oligomerized 53BP1 Tudor Domain Suffices for Recognition of DNA Double-Strand Breaks

O. Zgheib; K. Pataky; J. Brugger; T. D. Halazonetis 

Molecular and Cellular Biology. 2009. Vol. 29, p. 1050-1058. DOI : 10.1128/MCB.01011-08.

2010

Mechanically tuneable microoptical structure based on PDMS

V. J. Cadarso; A. Llobera; G. Villanueva; J. A. Plaza; J. Brugger et al. 

Sensors and Actuators a-Physical. 2010. Vol. 162, num. 2, p. 260-266. DOI : 10.1016/j.sna.2010.02.025.

Granular Co-C nano-Hall sensors by focused-beam-induced deposition

M. Gabureac; L. Bernau; I. Utke; G. Boero 

Nanotechnology. 2010. Vol. 21, num. 11, p. 115503. DOI : 10.1088/0957-4484/21/11/115503.

Direct writing laser of high aspect ratio epoxy microstructures

V. J. Cadarso; K. Pfeiffer; U. Ostrzinski; J. B. Bureau; G. A. Racine et al. 

Journal of Micromechanics and Microengineering. 2010. Vol. 21, num. 1, p. 017003. DOI : 10.1088/0960-1317/21/1/017003.

Fast and robust hydrogen sensors based on discontinuous palladium films on polyimide, fabricated on a wafer scale

T. Kiefer; G. Villanueva; F. Fargier; F. G. Favier; J. Brugger 

Nanotechnology. 2010. Vol. 21, num. 50, p. 505501. DOI : 10.1088/0957-4484/21/50/505501.

Fluidic microstructuring of alginate hydrogels for the single cell niche

T. Braschler; A. Valero; L. Colella; K. Pataky; J. Brugger et al. 

Lab on a Chip. 2010. Vol. 10, num. 20, p. 2771-2777. DOI : 10.1039/c004988c.

The transition in hydrogen sensing behavior in non-continuous palladium films

T. Kiefer; G. Villanueva; F. Fargier; F. Favier; J. Brugger 

Applied Physics Letters. 2010. Vol. 97, num. 12, p. 121911. DOI : 10.1063/1.3491263.

Sputtering of (001)AlN thin films: Control of polarity by a seed layer

E. Milyutin; S. Harada; D. Martin; J. F. Carlin; N. Grandjean et al. 

Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures. 2010. Vol. 28, num. 6, p. L61. DOI : 10.1116/1.3501117.

Large arrays of chemo-mechanical nanoswitches for ultralow-power hydrogen sensing

T. Kiefer; A. Salette; G. Villanueva; J. Brugger 

Journal of Micromechanics and Microengineering. 2010. Vol. 20, p. 105019. DOI : 10.1088/0960-1317/20/10/105019.

Inexpensive and fast wafer-scale fabrication of nanohole arrays in thin gold films for plasmonics

M. J. K. Klein; M. Guillaumée; B. Wenger; A. Dunbar; J. Brugger et al. 

Nanotechnology. 2010. Vol. 21, num. 20, p. 205301. DOI : 10.1088/0957-4484/21/20/205301.

Double-gate pentacene thin-film transistor with improved control in sub-threshold region

D. Tsamados; N. V. Cvetkovic; K. Sidler; J. Bhandari; V. Savu et al. 

Solid-State Electronics. 2010. Vol. 54, num. 9, p. 1003-1009. DOI : 10.1016/j.sse.2010.04.019.

Organic Thin Film Transistors on Flexible Polyimide Substrates Fabricated by Full Wafer Stencil Lithography

K. Sidler; N. Cvetkovic; A. V. Savu; D. Tsamados; M. A. Ionescu et al. 

Sensors and Actuators A. 2010. Vol. 162, num. 2, p. 155-159. DOI : 10.1016/j.sna.2010.04.016.

Stenciled conducting bismuth nanowires

V. Savu; S. Neuser; G. Villanueva; O. Vazquez-Mena; K. Sidler et al. 

Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures. 2010. Vol. 28, num. 1, p. 169-172. DOI : 10.1116/1.3292630.

2012

Active Integrated Tracking Detectors for MRI-Guided Interventions

J. Anders; M. Ortmanns; K. Scheffler; G. Boero 

Biomedical Engineering-Biomedizinische Technik. 2012. Vol. 57, p. 907. DOI : 10.1515/bmt-2012-4407.

The Solution of Nonlinear Function of Ion Mobility Based on FAIMS Spectrum Peak Position

D-L. Wang; C-L. Chen; C. Zhao; J. Gao; D-Y. Kong et al. 

Spectroscopy And Spectral Analysis. 2012. Vol. 32, num. 8, p. 2050-2055. DOI : 10.3964/j.issn.1000-0593(2012)08-2050-06.

UV-patternable polymers with selective spectral response

S. De Pedro; A. Voigt; V. J. Cadarso; J. Vila-Planas; J. Brugger et al. 

Microelectronic Engineering. 2012. Vol. 98, p. 234-237. DOI : 10.1016/j.mee.2012.07.013.

CAFM investigations of filamentary conduction in Cu2O ReRAM devices fabricated using stencil lithography technique

B. Singh; B. R. Mehta; D. Varandani; A. V. Savu; J. Brugger 

Nanotechnology. 2012. Vol. 23, num. 49, p. 495707. DOI : 10.1088/0957-4484/23/49/495707.

Phenyl-bridged polysilsesquioxane positive and negative resist for electron beam lithography

L. Brigo; V. Auzelyte; K. Lister; J. Brugger; G. Brusatin 

Nanotechnology. 2012. Vol. 23, p. 325302. DOI : 10.1088/0957-4484/23/32/325302.

Highly inorganic titania based sol–gel as directly patternable resist for micro- and nano- structured surfaces

E. Zanchetta; V. Auzelyte; J. Brugger; A. V. Savegnago; G. Della Giustina et al. 

Microelectronic Engineering. 2012. Vol. 98, p. 176-179. DOI : 10.1016/j.mee.2012.07.043.

Heterogeneous material micro-transfer by ink-jet print assisted mould filling

J. V. Cadarso; G. Smolik; V. Auzelyte; L. Jacot-Descombes; J. Brugger 

Microelectronic Engineering. 2012. Vol. 98, p. 619-622. DOI : 10.1016/j.mee.2012.04.025.

Streched organic transistors maintain mobility on flexible substrates

K. Sidler; N. V. Cvetkovic; D. Tsamados; A. M. Ionescu; J. Brugger et al. 

Microelectronic Engineering. 2012. Vol. 98, p. 508-511. DOI : 10.1016/j.mee.2012.07.080.

Effects of tensile stress on electrical parameters of thin film conductive wires fabricated on a flexible substrate using stencil lithography

M. Frantlović; I. Jokić; V. Savu; S. Xie; J. Brugger 

Microelectronic Engineering. 2012. Vol. 98, p. 230-233. DOI : 10.1016/j.mee.2012.07.016.

Organic half-wave rectifier fabricated by stencil lithography on flexible substrate

N. V. Cvetkovic; K. Sidler; V. Savu; J. Brugger; D. Tsamados et al. 

Microelectronic Engineering. 2012. Vol. 100, p. 47-50. DOI : 10.1016/j.mee.2012.07.110.

Vertically-stacked gate-all-around polysilicon nanowire FETs with sub-μm gates patterned by nanostencil lithography

D. Sacchetto; S. Xie; V. Savu; M. Zervas; G. De Micheli et al. 

Microelectronic Engineering. 2012. Vol. 98, p. 355-358. DOI : 10.1016/j.mee.2012.07.048.

Facile fabrication of nanofluidic diode membranes using anodic aluminium oxide

S. Wu; F. Wildhaber; O. Vazquez-Mena; A. Bertsch; J. Brugger et al. 

Nanoscale. 2012. Vol. 4, num. 18, p. 5718-5723. DOI : 10.1039/c2nr31243c.

All-stencil transistor fabrication on 3D silicon substrates

G. Villanueva; O. Vazquez-Mena; C. Martin-Olmos; V. Savu; K. Sidler et al. 

Journal of Micromechanics and Microengineering. 2012. Vol. 22, num. 9, p. 095022. DOI : 10.1088/0960-1317/22/9/095022.

Ultra-low power hydrogen sensing based on a palladium-coated nanomechanical beam resonator

J. Henriksson; L. G. Villanueva; J. Brugger 

Nanoscale. 2012. Vol. 4, num. 16, p. 5059-5064. DOI : 10.1039/C2NR30639E.

Fabrication of epoxy spherical microstructures by controlled drop-on-demand inkjet printing

L. Jacot-Descombes; R. M. Gullo; C. Busto; V. Javier; J. Brugger 

Journal of Micromechanics and Microengineering. 2012. Vol. 22, num. 7, p. 074012. DOI : 10.1088/0960-1317/22/7/074012.

High-Resolution Resistless Nanopatterning on Polymer and Flexible Substrates for Plasmonic Biosensing Using Stencil Masks

O. Vazquez Mena; T. Sannomiya; M. Tosun; G. Villanueva; A. V. Savu et al. 

ACS Nano. 2012. Vol. 6, num. 6, p. 5474-5481. DOI : 10.1021/nn301358n.

Nanocomposites based on highly luminescent nanocrystals and semiconducting conjugated polymer for inkjet printing

E. Binetti; C. Ingrosso; M. Striccoli; P. Cosma; A. Agostiano et al. 

Nanotechnology. 2012. Vol. 23, num. 7, p. 075701. DOI : 10.1088/0957-4484/23/7/075701.

Compliant membranes improve resolution in full-wafer micro/nanostencil lithography

K. Sidler; G. Villanueva; O. Vazquez-Mena; V. Savu; J. Brugger 

Nanoscale. 2012. Vol. 4, p. 773-778. DOI : 10.1039/c2nr11609j.

Highly ordered palladium nanodot patterns for full concentration range hydrogen sensing

L. G. Villanueva; F. Fargier; T. Kiefer; M. Ramonda; J. Brugger et al. 

Nanoscale. 2012. Vol. 4, p. 1964-1967. DOI : 10.1039/C2NR11983H.

Mechanical and tribological properties of polymer-derived Si/C/N sub-millimetre thick miniaturized components fabricated by direct casting

V. Bakumov; G. Blugan; S. Roos; T. Graule; V. Fakhfouri et al. 

Journal of the European Ceramic Society. 2012. Vol. 32, num. 8, p. 1759-1767. DOI : 10.1016/j.jeurceramsoc.2012.01.007.

Conductivity of SU-8 Thin Films through Atomic Force Microscopy Nano-Patterning

C. Martin-Olmos; G. Villanueva; P. van der Wal; A. Llobera; N. de Rooij et al. 

Advanced Functional Materials. 2012. Vol. 22, num. 7, p. 1482-1488. DOI : 10.1002/adfm.201102789.

Directly fabricated multi-scale microlens arrays on a hydrophobic flat surface by a simple ink-jet printing technique

J. Y. Kim; K. Pfeiffer; A. Voigt; G. Gruetzner; J. Brugger 

Journal of Materials Chemistry. 2012. Vol. 22, num. 7, p. 3053-3058. DOI : 10.1039/c2jm15576a.

Integrated active tracking detector for MRI-guided interventions

J. Anders; P. SanGiorgio; X. Deligianni; F. Santini; K. Scheffler et al. 

Magnetic Resonance In Medicine. 2012. Vol. 67, p. 290-296. DOI : 10.1002/mrm.23112.

Microdrop Printing of Hydrogel Bioinks into 3D Tissue-Like Geometries

K. Pataky; T. Braschler; A. Negro; P. Renaud; M. P. Lutolf et al. 

Advanced Materials. 2012. Vol. 24, num. 3, p. 391-396. DOI : 10.1002/adma.201102800.

2011

Ambipolar silicon nanowire FETs with stenciled-deposited metal gate

D. Sacchetto; V. Savu; G. De Micheli; J. Brugger; Y. Leblebici 

Microelectronic Engineering. 2011. Vol. 88, num. 8, p. 2732-2735. DOI : 10.1016/j.mee.2010.12.117.

A fully integrated IQ-receiver for NMR microscopy

J. Anders; P. SanGiorgio; G. Boero 

Journal Of Magnetic Resonance. 2011. Vol. 209, p. 1-7. DOI : 10.1016/j.jmr.2010.12.005.

Photon energy dependence of the light pressure exerted onto a thin silicon slab

F. K. Reinhart; G. Boero 

Physical Review B – Condensed Matter and Materials Physics. 2011. Vol. 83, num. 16, p. 165321. DOI : 10.1103/PhysRevB.83.165321.

Oxide nanocrystal based nanocomposites for fabricating photoplastic AFM probes

C. Ingrosso; C. Martin-Olmos; A. Llobera; C. Innocenti; C. Sangregorio et al. 

Nanoscale. 2011. Vol. 3, p. 4632-4639. DOI : 10.1039/c1nr10487j.

Localized Ion Implantation Through Micro/Nanostencil Masks

G. Villanueva; C. Martin Olmos; O. Vazquez Mena; J. Montserrat; P. Langlet et al. 

IEEE Transactions on Nanotechnology. 2011. Vol. 10, num. 5, p. 940-946. DOI : 10.1109/TNANO.2010.2090171.

100 mm dynamic stencils pattern sub-micrometre structures

A. V. Savu; S. Xie; J. Brugger 

Nanoscale. 2011. Vol. 3, num. 7, p. 2739. DOI : 10.1039/c1nr10083a.

Microlenses with defined contour shapes

V. J. Cadarso Busto; J. Perera-Núñez; L. Jacot-Descombes; K. Pfeiffer; U. Ostrzinski et al. 

Optics Express. 2011. Vol. 19, num. 19, p. 18665. DOI : 10.1364/OE.19.018665.

Hybrid polymer microlens arrays with high numerical apertures fabricated using simple ink-jet printing technique

J. Y. Kim; N. B. Brauer; V. Fakhfouri; D. Boiko; E. Charbon et al. 

Optical Materials Express. 2011. Vol. 1, num. 2, p. 259-269. DOI : 10.1364/OME.1.000259.

SiN membranes with submicrometer hole arrays patterned by wafer-scale nanosphere lithography

M. J. K. Klein; F. Montagne; N. Blondiaux; O. Vazquez-Mena; H. Heinzelmann et al. 

Journal of Vacuum Science & Technology B. 2011. Vol. 29, num. 2, p. 021012/1-5. DOI : 10.1116/1.3554404.

High Throughput Nanofabrication of Silicon Nanowire and Carbon Nanotube Tips on AFM Probes by Stencil-Deposited Catalysts

D. S. Engstrom; V. Savu; X. Zhu; I. Y. Y. Bu; W. I. Milne et al. 

Nano Letters. 2011. Vol. 11, num. 4, p. 1568-1574. DOI : 10.1021/nl104384b.

Robust PECVD SiC membrane made for stencil lithography

S. Xie; V. Savu; W. Tang; O. Vazquez-Mena; K. Sidler et al. 

Microelectronic Engineering. 2011. Vol. 88, p. 2790-2793. DOI : 10.1016/j.mee.2010.11.056.

Link between Alginate Reaction Front Propagation and General Reaction Diffusion Theory

T. Braschler; A. Valero; L. Colella; K. Pataky; J. Brugger et al. 

Analytical Chemistry. 2011. Vol. 83, num. 6, p. 2234-2242. DOI : 10.1021/ac103118r.

Fluorophore-doped xerogel antiresonant reflecting optical waveguides

A. Llobera; V. J. Cadarso Busto; E. Carregal-Romero; J. Brugger; C. Domínguez et al. 

Optics Express. 2011. Vol. 19, num. 6, p. 5026-5039. DOI : 10.1364/OE.19.005026.

Metallic Nanodot Arrays by Stencil Lithography for Plasmonic Biosensing Applications

O. Vazquez-Mena; T. Sannomiya; L. G. Villanueva; J. Voros; J. Brugger 

ACS Nano. 2011. Vol. 5, num. 2, p. 844-853. DOI : 10.1021/nn1019253.

The effects of channel length and film microstructure on the performance of pentacene transistors

F. D. Fleischli; K. Sidler; M. Schaer; V. Savu; J. Brugger et al. 

Organic Electronics. 2011. Vol. 12, num. 2, p. 336-340. DOI : 10.1016/j.orgel.2010.12.004.

Reliable and Improved Nanoscale Stencil Lithography by Membrane Stabilization, Blurring and Clogging Corrections

O. Vazquez-Mena; K. Sidler; V. Savu; C. W. Park; L. G. Villanueva et al. 

IEEE Transactions on Nanotechnology. 2011. Vol. 10, num. 2, p. 352-357. DOI : 10.1109/TNANO.2010.2042724.

2008

Electron counting at room temperature in an avalanche bipolar transistor

M. Lany; G. Boero; R. Popovic 

Applied Physics Letters. 2008. Vol. 92, num. 2, p. 022111. DOI : 10.1063/1.2830015.

Compact CMOS current conveyor for integrated NEMS resonators

J. Arcamone; B. Misischi; F. Serra-Graells; M. A. F. van den Boogaart; J. Brugger et al. 

Iet Circuits Devices & Systems. 2008. Vol. 2, p. 317-323. DOI : 10.1049/iet-cds:20070320.

Single-chip detector for electron spin resonance spectroscopy

T. Yalcin; G. Boero 

Review Of Scientific Instruments. 2008. Vol. 79, p. 094105. DOI : 10.1063/1.2969657.

Element-resolved x-ray ferrimagnetic and ferromagnetic resonance spectroscopy

G. Boero; S. Mouaziz; S. Rusponi; P. Bencok; F. Nolting et al. 

New journal of physics. 2008. Vol. 10, p. 013011. DOI : 10.1088/1367-2630/10/1/013011.

Two-dimensional magnetic resonance force microscopy using full-volume Fourier and Hadamard encoding

K. W. Eberhardt; A. Hunkeler; U. Meier; J. Tharian; S. Mouaziz et al. 

Physical Review B. 2008. Vol. 78, p. 214401 (5 pages). DOI : 10.1103/PhysRevB.78.214401.

Dynamic stencil lithography on full wafer scale

V. Savu; M. van den Boogaart; J. Brugger; J. Arcamone; M. Sansa et al. 

Journal of Vacuum Science and Technology B. 2008. Vol. 26, p. 2054-2058. DOI : 10.1116/1.2987953.

Mechanical stabilisation and design optimisation of masks for stencil lithography: Numerical approach and experimental validation

M. Lishchynska; M. van den Boogaart; V. Savu; J. Greer; J. Brugger 

Microelectronic Engineering. 2008. Vol. 85, p. 2243-2249. DOI : 10.1016/j.mee.2008.07.009.

The gas flow rate increase obtained by an oscillating piezoelectric actuator on a micronozzle

R. Wiederkehr; M. Salvadori; J. Brugger; F. Degasperi; M. Cattani 

Sensors and Actuators A. 2008. Vol. 144, p. 154-160. DOI : 10.1016/j.sna.2007.12.024.

Tunable, high aspect ratio pillars on diverse substrates using copolymer micelle lithography: an interesting platform for applications

S. Krishnamoorthy; Y. Gerbig; C. Hibert; R. Pugin; C. Hinderling et al. 

Nanotechnology. 2008. Vol. 19, num. 28, p. 285301. DOI : 10.1088/0957-4484/19/28/285301.

Combining micelle self-assembly with nanostencil lithography to create periodic/aperiodic micro- /nanopatterns on surfaces

S. Krishnamoorthy; M. A. F. Van den Boogaart; J. Brugger; C. Hibert; R. Pugin et al. 

Advanced Materials. 2008. Vol. 20, num. 18, p. 3533-3538. DOI : 10.1002/adma.200702478.

Metallic Nanowires by Full Wafer Stencil Lithography

O. Vazquez Mena; G. Villanueva; V. Savu; K. Sidler; M. A. F. van den Boogaart et al. 

Nano Letters. 2008. Vol. 8, num. 11, p. 3675-3682. DOI : 10.1021/nl801778t.

Stencil assisted reactive ion etching for micro and nano patterning

B. Viallet; J. Grisolia; L. Ressier; M. Van Den Boogaart; J. Brugger et al. 

Microelectronics Engineering. 2008. Vol. 85, num. 8, p. 1705-1708. DOI : 10.1016/j.mee.2008.04.027.

Reusability of nanostencils for the patterning of Aluminum nanostructures by selective wet etching

O. Vazquez-Mena; G. Villanueva; M. A. F. van den Boogaart; V. Savu; J. Brugger 

Microelectronic Engineering. 2008. Vol. 85, num. 5-6, p. 1237-1240. DOI : 10.1016/j.mee.2007.12.083.

Novel methods to pattern polymers for microfluidics

C. Martin; A. Llobera; T. Leïchlé; G. Villanueva; A. Voigt et al. 

Microelectronic Engineering. 2008. Vol. 85, p. 972-975. DOI : 10.1016/j.mee.2008.01.052.

Full-wafer fabrication by nanostencil lithography of micro/nanomechanical mass sensors monolithically integrated with CMOS

J. Arcamone; M. van den Boogaart; F. Serra-Graells; J. Fraxedas; J. Brugger et al. 

Nanotechnology. 2008. Vol. 19, num. 30, p. 305302. DOI : 10.1088/0957-4484/19/30/305302.

Etching of sub-micrometer structures through Stencil

G. Villanueva; O. Vazquez-Mena; M. A. F. van den Boogaart; K. Sidler; K. Pataky et al. 

Microelectronic Engineering. 2008. Vol. 85, p. 1010-1014. DOI : 10.1016/j.mee.2007.12.068.

Nanopatterned Self-Assembled Monolayers by Using Diblock Copolymer Micelles as Nanometer-Scale Adsorption and Etch Masks

S. Krishnamoorthy; R. Pugin; J. Brugger; H. Heinzelmann; C. Hinderling 

Advanced Materials. 2008. Vol. 20, num. 10, p. 1962-1965. DOI : 10.1002/adma.200702005.

The systematic tunability of nanoparticle dimensions through the controlled loading of surface-deposited diblock copolymer micelles

S. Krishnamoorthy; R. Pugin; C. Hinderling; J. Brugger; H. Heinzelmann 

Nanotechnology. 2008. Vol. 19, p. 175301. DOI : 10.1088/0957-4484/19/17/175301.

A single nanotrench in a palladium microwire for hydrogen detection

T. Kiefer; F. Favier; O. Vazquez; G. Villanueva; J. Brugger 

Nanotechnology. 2008. Vol. 19, num. 12, p. 125502. DOI : 10.1088/0957-4484/19/12/125502.

2007

Fabrication and testing of a poly(vinylidene fluoride) (PVDF) microvalve for gas flow control

R. S. Wiederkehr; M. C. Salvadori; J. Brugger; F. T. Degasperi; M. Cattani 

Smart Materials and Structures. 2007. Vol. 16, p. 2302-2307. DOI : 10.1088/0964-1726/16/6/033.

Direct observation of nuclear spin diffusion in real space

K. W. Eberhardt; S. Mouaziz; G. Boero; J. Brugger; B. H. Meier 

Physics Review Letters. 2007. Vol. 99, p. 227603. DOI : 10.1103/PhysRevLett.99.227603.

Uniformly Dispersed Deposition of Colloidal Nanoparticles and Nanowires by Boiling

K. Lee; M. Duchamp; G. Kulik; A. Magrez; J. W. Seo et al. 

Applied Physics Letters. 2007. Vol. 91, num. 17, p. 173112. DOI : 10.1063/1.2803320.

Selective deposition of gold nanoparticles using Van der Waals interactions

B. Viallet; L. Ressier; J. Grisolia; J. Peyrade; R. Podgajny et al. 

physica status solidi (c). 2007. Vol. 4, num. 2, p. 276-278. DOI : 10.1002/pssc.200673344.

Micropositioning and microscopic observation of individual picoliter-sized containers within SU-8 microchannels

M. Jenke; C. Schreiter; G. Kim; H. Vogel; J. Brugger 

Microfluidics and Nanofluidics. 2007. Vol. 3, num. 2, p. 189-194. DOI : 10.1007/s10404-006-0119-2.

Dry etching for the correction of gap-induced blurring and improved pattern resolution in nanostencil lithography

J. Arcamone; A. Sanchez-Amores; J. Montserrat; M. van den Boogaart; J. Brugger et al. 

Journal of Microlithography, Microfabrication, and Microsystems. 2007. Vol. 6, p. 013005-1-7. DOI : 10.1117/1.2435273.

An Epoxy Photoresist Modified by Luminescent Nanocrystals for the Fabrication of 3D High-Aspect-Ratio Microstructures

C. Ingrosso; V. Fakhfouri; M. Striccoli; A. Agostiano; A. Voigt et al. 

Advanced Functional Materials. 2007. Vol. 17, p. 2009-2017. DOI : 10.1002/adfm.200700098.

A Compact and Low-Power CMOS Circuit for Fully-Integrated NEMS Resonators

J. Arcamone; B. Misischi; F. Serra-Graells; M. A. F. van den Boogaart; J. Brugger et al. 

IEEE Transactions on Circuits and Systems II. 2007. Vol. 54, num. 5, p. 377-381. DOI : 10.1109/TCSII.2007.892228.

Nanostenciling for combinatorial fabrications and interconnections of nanopatterns and microelectrodes

H. Guo; D. Martrou; T. Zambelli; J. Polesel-Maris; A. Piednoir et al. 

Virtual Journal of Nanoscale Science & Technology. 2007. Vol. 15, num. 10.

Nanostenciling for fabrication and interconnection of nanopatterns and microelectrodes

H. Guo; D. Martrou; T. Zambelli; J. Polesel-Maris; A. Piednoir et al. 

Applied Physics Letters. 2007. Vol. 90, num. 9, p. 093113. DOI : 10.1063/1.2710473.

Patterning of parallel nanobridge structures by reverse nanostencil lithography using an edge-patterned stencil

C. W. Park; O. Vazquez Mena; J. Brugger 

Nanotechnology. 2007. Vol. 18, num. 4, p. 044002. DOI : 10.1088/0957-4484/18/4/044002.

NMR spectroscopy and perfusion of mammalian cells using surface microprobes

K. Ehrmann; K. Pataky; M. Stettler; F. M. Wurm; J. Brugger et al. 

Lab on a Chip. 2007. Vol. 7, num. 3, p. 381-383. DOI : 10.1039/B613240E.

Synthesis of localized 2D-layers of silicon nanoparticles embedded in a SiO2 layer by a stencil-masked ultra-low energy ion implantation process

C. Dumas; J. Grisolia; L. Ressier; A. Arbouet; V. Paillard et al. 

Physica Status Solidi (a). 2007. Vol. 204, num. 2, p. 487-491. DOI : 10.1002/pssa.200673232.

Predicting mask distortion, clogging and pattern transfer for stencil lithography

M. Lishchynska; V. Bourenkov; M. A. F. van den Boogaart; L. Doeswijk; J. Brugger et al. 

Microelectronic Engineering. 2007. Vol. 81, num. 1, p. 42-53. DOI : 10.1016/j.mee.2006.08.003.

2004

Reinforcement of single-walled carbon nanotube bundles by intertube bridging

A. Kis; G. Csanyi; J. P. Salvetat; T. N. Lee; E. Couteau et al. 

Nature Materials. 2004. Vol. 3, num. 3, p. 153-157. DOI : 10.1038/nmat1076.

Fabrication of Miniaturized Shadow-mask for Local Deposition

G. M. Kim; J. Brugger 

Journal of Korean Society of Precision Engineering. 2004. Vol. 21, num. 8.

Current-driven switching of exchange biased spin-valve giant magnetoresistive nanopillars using a conducting nanoprobe

J. Hayakawa; K. Ito; M. Fujimori; S. Heike; T. Hashizume et al. 

Journal of Applied Physics. 2004. Vol. 96, num. 6, p. 3440-3442. DOI : 10.1063/1.1769605.

Deep-ultraviolet–microelectromechanical systems stencils for high-throughput resistless patterning of mesoscopic structures

M. A. F. van den Boogaart; G. M. Kim; R. Pellens; J. P. van den Heuvel; J. Brugger 

Virtual Journal of Biological Physics Research. 2004. Vol. 8, num. 12.

Nanodispenser for attoliter volume deposition using atomic force microscopy probes modified by focused-ion-beam milling

A. Meister; M. Liley; J. Brugger; R. Pugin; H. Heinzelmann 

Applied Physics Letters. 2004. Vol. 85, num. 25, p. 6260-6262. DOI : 10.1063/1.1842352.

Exploring microstencils for sub-micron patterning using pulsed laser deposition

F. Vroegindeweij; E. Speets; J. Steen; J. Brugger; D. Blank 

Applied Physics A – Mater. Sci. Process.. 2004. Vol. 79, num. 4-6, p. 743-745. DOI : 10.1007/s00339-004-2749-0.

Nanomechanical structures with 91 MHz resonance frequency fabricated by local deposition and dry etching

G. Kim; S. Kawai; M. Nagashio; H. Kawakatsu; J. Brugger 

Journal of Vacuum Science and Technology B. 2004. Vol. 22, num. 4, p. 1658-1661. DOI : 10.1116/1.1761240.

Deep-ultraviolet-microelectromechanicaI systems stencils for high-throughput resistless. patterning of mesoscopic structures

M. van den Boogaart; G. Kim; R. Pellens; J. van den Heuvel; J. Brugger 

Journal of Vacuum Science and Technology B. 2004. Vol. 22, num. 6, p. 3174-3177. DOI : 10.1116/1.1802931.

1995

AFM imaging with an xy-micropositioner with integrated tip

P-F. Indermühle; V. P. Jaecklin; J. Brugger; C. Linder; N. F. de Rooij et al. 

Sensors and Actuators A. 1995. Vol. 46-47, p. 562-565. DOI : 10.1016/0924-4247(94)00962-H.

1994

Mechanical and optical properties of surface micromachined torsional mirrors in silicon, polysilicon and aluminum

V. P. Jaecklin; C. Linder; J. Brugger; N. F. de Rooij; J. M. Moret et al. 

Sensors and Actuators A. 1994. Vol. 43, num. 1-3, p. 296-274. DOI : 10.1016/0924-4247(93)00699-5.

Design and fabrication of an overhanging xy-microactuator with integrated tip for scanning surface profiling

P. F. Indermuehle; C. Linder; J. Brugger; V. P. Jaecklin; N. F. de Rooij 

Sensors and Actuators A. 1994. Vol. 43, num. 1-3, p. 346-350. DOI : 10.1016/0924-4247(93)00704-8.

Microlever with combined integrated sensor/actuator functions for scanning force microscopy

J. Brugger; N. Blanc; P. Renaud; N. F. de Rooij 

Sensors and Actuators A. 1994. Vol. 43, num. 1-3, p. 339-345. DOI : 10.1016/0924-4247(93)00701-5.

1993

Microfabricated tools for nanoscience

J. Brugger; V. P. Jaecklin; C. Linder; N. Blanc; P. F. Indermühle et al. 

Journal of Micromechanics and Microengineering. 1993. Vol. 3, num. 4, p. 161-167. DOI : 10.1088/0960-1317/3/4/001.

1992

Micromachined silicon cantilevers and tips for bidirectional force microscopy

R. A. Buser; J. Brugger; N. F. de Rooij 

Ultramicroscopy. 1992. Vol. 42-44, p. 1476-1480. DOI : 10.1016/0304-3991(92)90469-Z.

Silicon cantilevers and tips for scanning force microscopy

J. Brugger; R. A. Buser; N. F. de Rooij 

Sensors and Actuators A. 1992. Vol. 34, num. 3, p. 193-200. DOI : 10.1016/0924-4247(92)85002-J.

Micromachined atomic force microprobe with integrated capacitive read-out

J. Brugger; R. A. Buser; N. F. de Rooij 

Journal of Micromechanics and Microengineering. 1992. Vol. 2, p. 218-220. DOI : 10.1088/0960-1317/2/3/026.

1991

Micromachined Silicon Cantilevers and Tips for Scanning Probe Microscopy

R. Buser; J. Brugger; N. de Rooij 

Microelectronic Engineering. 1991. Vol. 15, num. 1-4, p. 407-410. DOI : 10.1016/0167-9317(91)90252-9.