Other topics


On measured activation volumes as relevant to ratcheting or cyclic creep

S. Soubielle; A. Mortensen 

Scripta Materialia. 2011. Vol. 65, num. 9, p. 787-790. DOI : 10.1016/j.scriptamat.2011.07.032.


Materials science: Pleated crystals

F. Stellacci; A. Mortensen 

Nature. 2010. Vol. 468, num. 7326, p. 906-907. DOI : 10.1038/468906a.


Coordination measurements in compacted NaCl irregular powders using X-ray microtomography

A. Marmottant; L. Salvo; C. L. Martin; A. Mortensen 

Journal Of The European Ceramic Society. 2008. Vol. 28, num. 13, p. 2441-2449. DOI : 10.1016/j.jeurceramsoc.2008.03.041.


Sintering of NaCl powder: Mechanisms and first stage kinetics

R. Goodall; J. F. Despois; A. Mortensen 

Journal Of The European Ceramic Society. 2006. Vol. 26, num. 16, p. 3487-3497. DOI : 10.1016/j.jeurceramsoc.2005.12.020.


Geometrically necessary dislocations and strain-gradient plasticity: A few critical issues

L. P. Kubin; A. Mortensen 

Scripta Materialia. 2003. Vol. 48, num. 2, p. 119. DOI : 10.1016/S1359-6462(02)00335-4.


Heating of TEM specimens during ion milling

B. Viguier; A. Mortensen 

Ultramicroscopy. 2001. Vol. 87, num. 3, p. 123. DOI : 10.1016/S0304-3991(00)00095-4.


Thermal fatigue of single-crystalline superalloy CMSX-4: A comparison of epitaxial laser-deposited material with the base single crystal

L. Felberbaum; K. Voisey; M. Gaumann; B. Viguier; A. Mortensen 

Materials Science and Engineering A. 2001. Vol. 299, num. 1-2, p. 152. DOI : 10.1016/S0921-5093(00)01378-2.


Semi-solid behaviour of A356 Al alloys at the onset of breakage

K. Mahjoub; A. Mortensen; M. Rappaz 

2000.  p. 175.


The effect of gravity on solution-reprecipitation during liquid phase sintering

C. San Marchi; L. Felberbaum; A. Mortensen 

Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science. 2000. Vol. 31, num. 2, p. 397-400. DOI : 10.1007/s11661-000-0276-y.


Plasticity in Chevron-notch fracture toughness testing

T. J. Grant; L. Weber; A. Mortensen 

Engineering Fracture Mechanics. 2000. Vol. 67, num. 3, p. 263. DOI : 10.1016/S0013-7944(00)00061-8.


On the use of considere’s criterion in tensile testing of materials which accumulate internal damage

L. Weber; M. Kouzeli; C. San Marchi; A. Mortensen 

Scripta Materialia. 1999. Vol. 41, num. 5, p. 549. DOI : 10.1016/S1359-6462(99)00159-1.


Strength and structure of furnace-brazed joints between aluminum and stainless steel

M. Roulin; J. W. Luster; G. Karadeniz; A. Mortensen 

Welding Journal. 1999. Vol. 78, num. 5, p. 151-s–155-s.