Fiber Reinforced Metals

2012

Tensile strength of axially loaded unidirectional Nextel 610 (TM) reinforced aluminium: A case study in local load sharing between randomly distributed fibres

A. Rossoll; B. Moser; A. Mortensen 

Composites Part A-Applied Science And Manufacturing. 2012. Vol. 43, p. 129-137. DOI : 10.1016/j.compositesa.2011.09.027.

2009

In situ flow stress of pure aluminium constrained by tightly packed alumina fibres

A. Rossoll; B. Moser; L. Weber; A. Mortensen 

Acta Materialia. 2009. Vol. 57, num. 6, p. 1795-1812. DOI : 10.1016/j.actamat.2008.12.024.

2008

Measurement of damage evolution in continuous ceramic fibre-reinforced metals by acoustic emission

A. Rossoll; C. Otto; B. Moser; L. Weber; A. Wanner et al. 

Scripta Materialia. 2008. Vol. 59, num. 8, p. 842-845. DOI : 10.1016/j.scriptamat.2008.06.027.

2005

Damage accumulation during cyclic loading of a continuous alumina fibre reinforced aluminium composite

B. Moser; L. Weber; A. Mortensen 

Scripta Materialia. 2005. Vol. 53, num. 10, p. 1111-1115. DOI : 10.1016/j.scriptamat.2005.07.024.

Ductility of Saffil(TM) short fibre reinforced metals

L. Weber; R. Tavangar; A. Mortensen 

Scripta Materialia. 2005. Vol. 53, num. 1, p. 17-21. DOI : 10.1016/j.scriptamat.2005.03.027.

Damage evolution in Saffil alumina short-fibre reinforced aluminium during tensile testing

R. Tavangar; L. Weber; A. Mortensen 

Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 2005. Vol. 395, num. 1-2, p. 27-34. DOI : 10.1016/j.msea.2004.12.009.

Longitudinal deformation of fibre reinforced metals: Influence of fibre distribution on stiffness and flow stress

A. Rossoll; B. Moser; A. Mortensen 

Mechanics of Materials. 2005. Vol. 37, num. 1-17, p. 1. DOI : 10.1016/j.mechmat.2003.12.001.

2004

Damage evolution of Nextel 610? alumina fibre reinforced aluminium

B. Moser; A. Rossoll; L. Weber; O. Beffort; A. Mortensen 

Acta Materialia. 2004. Vol. 52, num. 3, p. 573. DOI : 10.1016/j.actamat.2003.09.040.

2003

The influence of non-linear elasticity on the determination of Weibull parameters using the fibre bundle tensile test

B. Moser; L. Weber; A. Rossoll; A. Mortensen 

Composites Part A: Applied Science and Manufacturing. 2003. Vol. 34, num. 9, p. 907. DOI : 10.1016/S1359-835X(03)00134-9.

Transmitted light microscopy of a fibre reinforced metal

B. Moser; A. Rossoll; L. Weber; O. Beffort; A. Mortensen 

Journal of Microscopy. 2003. Vol. 209, num. 1, p. 8-12. DOI : 10.1046/j.1365-2818.2003.01097.x.

2001

Nextel™ 610 alumina fibre reinforced aluminium: Influence of matrix and process on flow stress

B. Moser; A. Rossoll; L. Weber; O. Beffort; A. Mortensen 

Composites – Part A: Applied Science and Manufacturing. 2001. Vol. 32, num. 8, p. 1067-1075. DOI : 10.1016/S1359-835X(00)00178-0.

Infiltration processing of fibre reinforced composites: governing phenomena

V. Michaud; A. Mortensen 

Composites Part A-Applied Science And Manufacturing. 2001. Vol. 32, num. 8, p. 981-996. DOI : 10.1016/S1359-835X(01)00015-X.

2000

Fracture strength of alumina fiber reinforced aluminum wire with and without a torsional pre-strain

L. Weber; P. Canalis-Nieto; A. Rossoll; A. Mortensen 

Acta Materialia. 2000. Vol. 48, num. 12, p. 3235. DOI : 10.1016/S1359-6454(00)00112-9.

Swift and inverse swift effect in alumina fiber reinforced aluminum wires

L. Weber; B. Moser; H. U. Künzi; A. Mortensen 

Acta Materialia. 2000. Vol. 48, num. 10, p. 2451. DOI : 10.1016/S1359-6454(00)00080-X.