Self-catalysed frontal polymerisation enables fast and low-energy processing of fibre reinforced polymer composites

J. Staal; B. Caglar; V. Michaud 

On the influence of flow-front orientation on stringer stiffened composite panels in water impacts

C. Pearson; M. de Mourgues; M. Battley; V. Michaud; J. Little et al. 

Optical Monitoring of Water Side Permeation in Thin Film Encapsulation

K. Wu; M. Mariello; Y. Leterrier; S. P. Lacour 

Performance polyamides built on a sustainable carbohydrate core

L. P. Manker; M. A. C. Hedou; C. Broggi; M. J. F. Jones; K. Kortsen et al. 

Saturated transverse permeability of unidirectional rovings for pultrusion: The effect of microstructural evolution through compaction

O. Yuksel; B. Caglar; G. Broggi; V. Michaud; R. Akkerman et al. 

A multiscale consolidation model for press molding of hybrid textiles into complex geometries

V. Werlen; C. Rytka; C. Dransfeld; C. Brauner; V. Michaud 

Mode I fracture of thick adhesively bonded GFRP composite joints for wind turbine rotor blades

J. Fan; A. P. Vassilopoulos; V. Michaud 

Design for demise applied to spacecraft structural panels and experiments for ClearSpace One platform

Tuning the Mechanical Properties of Poly(butylene xylosediglyoxylate) via Compounding Strategies

M. Vieli; M. A. C. Hedou; P. B. V. Scholten; A. Demongeot; L. P. Manker et al. 

Effect of wettability and textile architecture on fluid displacement and pore formation during infiltration of carbon fibrous preforms

H. Teixido; B. Caglar; V. Michaud 

ECCM Research Topic on advanced manufacturing of composites

C. Binetruy; B. Caglar; L. Daelemans; C. Dransfeld; V. Michaud 

Advancing spacecraft demisability through a novel composite bolt joint system: a step toward sustainable and safe space environments

A. A. Looten; A. Vodermayer; A. Caiazzo; R. Usinger; M. Richard et al. 

Recyclable flame retardant phosphonated epoxy based thermosets enabled via a reactive approach

W. W. Klingler; V. Rougier; Z. Huang; D. Parida; S. Lehner et al. 

A model for the consolidation of hybrid textiles considering air entrapment, dissolution and diffusion

V. Werlen; R. Vocke; C. Brauner; C. Dransfeld; V. Michaud et al. 

Thermal management in radical induced cationic frontal polymerisation for optimised processing of fibre reinforced polymers

J. Staal; E. Smit; B. Çaglar; V. Michaud 

Implementation and parametric study of J-integral data reduction methods for the translaminar toughness of hierarchical thin-ply composites

G. Broggi; J. Cugnoni; V. Michaud 

Measurement and modelling of dynamic fluid saturation in carbon reinforcements

H. Teixidó; G. Broggi; B. Caglar; V. Michaud 

Influence of the molecular weight and physical properties of a thermoplastic polymer on its dynamic wetting behavior

V. Rougier; J. Cellier; B. Duchemin; M. Gomina; J. Breard 

Benchmark exercise on image-based permeability determination of engineering textiles: Microscale predictions

E. Syerko; T. Schmidt; D. May; C. Binetruy; S. Advani et al. 

INFLUENCE OF VOIDS ON THICK DCB JOINT BEHAVIOR

J. Fan; A. Vassilopoulos; V. Michaud 

Colombian Sustainability Perspective on Fused Deposition Modeling Technology: Opportunity to Develop Recycled and Biobased 3D Printing Filaments

M. A. Morales; A. Maranon; C. Hernandez; V. Michaud; A. Porras 

Process development of pre-impregnated hybrid thin-ply composites

A multi scale consolidation model for press moulding of hybrid textiles into complex geometries

Strategies for energy-efficient frontal polymerisation processing and microstructural evaluation of fibre reinforced composites

Multi-scale characterization and modeling of notched strength and translaminar fracture in hybrid thin-ply composites based on different carbon fiber grades

Visualization and modelling of dynamic flow in fibrous preforms for liquid composite molding

INFLUENCE OF VOIDS ON THICK DCB JOINT BEHAVIOR

J. Fan; A. Vassilopoulos; V. Michaud 

Three-dimensional micro-CT images of UV-frozen flow fronts recorded at different flow regimes

V. Michaud; J. Staal 

Simulations of Radical Induced Cationic Frontal Polymerisation under different applied initial temperatures, trigger times and glass fibre contents

V. Michaud; J. Staal 

3D representation of meso-voids location and morphology within the fibrous pore space of three carbon fabrics

H. L. Teixido Pedarros; V. Michaud 

Recycling of Bottle Grade PET: Influence of HDPE Contamination on the Microstructure and Mechanical Performance of 3D Printed Parts

J. Vaucher; A. Demongeot; V. Michaud; Y. Leterrier 

Novel tooling for direct melt impregnation of textile with variotherm injection moulding: Methodology and proof of concept

V. Werlen; C. Rytka; S. Wegmann; H. Philipp; Y. Khalaf et al. 

A Novel Method to Quantify Self-Healing Capabilities of Fiber-Reinforced Polymers

C. Scazzoli; R. Trigueira; A. Cohades; V. Michaud 

A functional approach towards the design, development, and test of an affordable dynamic prosthetic foot

M. Falbriard; G. Huot; M. Janier; R. Chandran; M. Rechsteiner et al. 

Uniformly Dispersed Poly(lactic acid)-Grafted Lignin Nanoparticles Enhance Antioxidant Activity and UV-Barrier Properties of Poly(lactic acid) Packaging Films

A. Boarino; A. Schreier; Y. Leterrier; H-A. Klok 

Sustainable polyesters via direct functionalization of lignocellulosic sugars

L. P. Manker; G. R. Dick; A. Demongeot; M. A. Hedou; C. Rayroud et al. 

Photoresponsive Movement in 3D Printed Cellulose Nanocomposites

L. A. E. Mueller; A. Demongeot; J. Vaucher; Y. Leterrier; J. Avaro et al. 

Photocured Nanocellulose Composites: Recent Advances

M. A. Poothanari; A. Schreier; K. Missoum; J. Bras; Y. Leterrier 

Enhanced ductility in high performance polyamides due to strain-induced phase transitions

N. Candau; J-M. Chenal; O. Lame; P. Schouwink; V. Michaud et al. 

Deep learning accelerated prediction of the permeability of fibrous microstructures

B. Caglar; G. Broggi; M. A. Ali; L. Orgéas; V. Michaud 

Community Masks-from an Emergency Solution to an Innovation Booster for the Textile Industry

T. Batt; G. Herwig; S. Annaheim; P. Clement; L. Furer et al. 

On the durability of surgical masks after simulated handling and wear

V. Varanges; B. Çaglar; Y. Lebaupin; T. Batt; W. He et al. 

A life cycle analysis of novel lightweight composite processes: Reducing the environmental footprint of automotive structures

S. Wegmann; C. Rytka; M. Diaz-Rodenas; V. Werlen; C. Schneeberger et al. 

Investigation of bulk adhesive material and thick adhesive joints for wind turbine applications

J. Fan; J. Karami; A. Kojouri; D. van Hemelrijck; A. Vassilopoulos et al. 

An Injectable Family Of Soft Tissue Hydrogel Adhesives For Knee Applications

P. Karami; C. Wyss; P-E. Bourban; P. Procter; C. Moser et al. 

Recent Advances in Encapsulation of Flexible Bioelectronic Implants: Materials, Technologies, and Characterization Methods

M. Mariello; K. Kim; K. Wu; S. P. Lacour; Y. Leterrier 

Capillary Effects in Fiber Reinforced Polymer Composite Processing: A Review

H. Teixido; J. Staal; B. Caglar; V. Michaud 

Proceedings of the 20th European Conference on Composite Materials – Composites Meet Sustainability (Vol 1-6)

A. Vassilopoulos; V. Michaud 

High-performance polyamides with engineered disorder

N. Candau; S. Galland; J. Cretenoud; S. Balog; V. Michaud et al. 

Stiff, Strong, Tough, and Highly Stretchable Hydrogels Based on Dual Stimuli-Responsive Semicrystalline Poly(urethane–urea) Copolymers

N. Candau; G. Stoclet; J-F. Tahon; A. Demongeot; P. Schouwink et al. 

Extended Barrier Lifetime of Partially Cracked Organic/Inorganic Multilayers for Compliant Implantable Electronics

K. Kim; M. Van Gompel; K. Wu; G. Schiavone; J. Carron et al. 

In-series sample methodology for permeability characterization demonstrated on carbon nanotube-grafted alumina textiles

J. Staal; B. Çaglar; T. Hank; B. L. Wardle; L. Gorbatikh et al. 

Valorization of Byproducts of Hemp Multipurpose Crop: Short Non-Aligned Bast Fibers as a Source of Nanocellulose

S. Dalle Vacche; V. Karunakaran; A. Patrucco; M. Zoccola; L. Douard et al. 

Viscoelastic behavior of suspensions of reduced graphene oxide nanoparticles in epoxy

M. Majidian; A. Magrez; L. Forro; Y. Leterrier 

In-operando dynamic visualization of flow through porous preforms based on X-ray phase contrast imaging

H. Teixidó; B. Caglar; V. Revol; V. Michaud 

Silk granular hydrogels self-reinforced with regenerated silk fibroin fibers

C. S. Wyss; P. Karami; A. Demongeot; P-E. Bourban; D. Pioletti 

Out-of-plane permeability measurement for reinforcement textiles: A benchmark exercise

A. Yong; A. Aktas; D. May; A. Endruweit; S. Advani et al. 

Resin Transfer molding of High-Fluidity Polyamide-6 with modified Glass-Fabric preforms

C. Gomez; D. Salvatori; B. Caglar; R. Trigueira; G. Orange et al. 

An Intrinsically-Adhesive Family of Injectable and Photo-Curable Hydrogels with Functional Physicochemical Performance for Regenerative Medicine

P. Karami; N. Nasrollahzadeh; C. Wyss; A. O’Sullivan; M. Broome et al. 

Mechanical reinforcement and memory effect of strain-induced soft segment crystals in thermoplastic polyurethane-urea elastomers

N. Candau; G. Stoclet; J-F. Tahon; A. Demongeot; E. Yilgor et al. 

Development and Characterization of Rice Husk and Recycled Polypropylene Composite Filaments for 3D Printing

M. A. Morales; C. L. Atencio Martinez; A. Maranon; C. Hernandez; V. Michaud et al. 

A numerical approach to characterize the viscoelastic behaviour of fibre beds and to evaluate the influence of strain deviations on viscoelastic parameter extraction

V. Werlen; C. Rytka; V. Michaud 

Kinematic and mechanical response of dry woven fabrics in through-thickness compression: Virtual fiber modeling with mesh overlay technique and experimental validation

L. Daelemans; B. Tomme; B. Caglar; V. Michaud; J. Van Stappen et al. 

Experimental characterisation of textile compaction response: A benchmark exercise

A. Yong; A. Aktas; D. May; A. Endruweit; S. Lomov et al. 

Surface modified microfibrillated cellulose‐poly(vinylidene fluoride) composites: β‐phase formation, viscoelastic and dielectric performance

M. A. Poothanari; V. Michaud; D. Damjanovic; Y. Leterrier 

Functionalized Fiber Reinforced Composites via Thermally Drawn Multifunctional Fiber Sensors

B. Çaglar; W. Esposito; D. T. Nguyen; S. Laperrousaz; V. Michaud et al. 

Poly(lactide)/cellulose nanocrystal nanocomposites by high-shear mixing

O. Oguz; N. Candau; A. Demongeot; M. K. Citak; F. N. Cetin et al. 

Radical photoinduced cationic frontal polymerization in porous media

D. Maugeri; M. Sangermano; Y. Leterrier 

Permeability properties of composite reinforcements

V. Michaud 

Elongated microstructured capacitive sensor

F. Sorin; W. Esposito; V. Michaud; C. Dong; B. Çaglar et al. 

Edible fiber

J. Engmann; E-R. Janecek; V. Michaud; Y. Qu; F. Sordo et al. 

Reusability of filtering facepiece respirators after decontamination through drying and germicidal UV irradiation

D. Vernez; J. Save; A. Oppliger; N. Concha-Lozano; N. B. Hopf et al. 

Statistical Fatigue Investigation and Failure Prediction of a Healable Composite System

N. Hostettler; A. Cohades; V. Michaud 

Lithium-Gold Reference Electrode for Potential Stability DuringIn SituElectron Microscopy Studies of Lithium-Ion Batteries

J. Hou; R. Girod; N. Nianias; T-H. Shen; J. Fan et al. 

Strain and filler ratio transitions from chains network to filler network damage in EPDM during single and cyclic loadings

N. Candau; O. Oguz; E. Peuvrel-Disdier; J-L. Bouvard; C. Pradille et al. 

Hybrid granular hydrogels: combining composites and microgels for extended ranges of material properties

C. S. Wyss; P. Karami; P-E. Bourban; D. P. Pioletti 

Special issue for flow processing in composite materials

T. S. Lundstrom; V. Michaud 

Cross-linkable polymer, hydrogel, and method of preparation thereof

P. Karami; D. Pioletti; C. S. Wyss; P-E. Bourban; C. Moser 

Composite material

A. Cohades; V. Michaud 

The Influence of Microstructure on Nanomechanical and Diffusion Barrier Properties of Thin PECVD SiOx Films Deposited on Parylene C Substrates

D. Framil; M. Van Gompel; F. Bourgeois; I. Furno; Y. Leterrier 

Crushing and intrusion resistance improvement of aluminum beams by carbon/epoxy composite patches

Y. Lebaupin; J. Friedli; B. Caglar; M. Piccand; R. Pasquier et al. 

Nitrogen-doped graphene stabilized copper nanoparticles for Huisgen [3+2] cycloaddition “click” chemistry

R. V. S. P. Sanka; K. Balaji; Y. Leterrier; S. Pandey; M. Srivastava et al. 

Insights into the fabrication of sub-100 nm textured thermally drawn fibers

Tung Nguyen Dang; I. Richard; E. Goy; F. Sordo; F. Sorin 

Magnetic Properties of Nanocomposites

G. Barrera; P. Tiberto; P. Allia; B. Bonelli; S. Esposito et al. 

Microstructured Fibers for the Production of Food

F. Sordo; E-R. Janecek; Y. Qu; V. Michaud; F. Stellacci et al. 

3D spacers enhance flow kinetics in resin transfer molding with woven fabrics

D. Salvatori; B. Caglar; V. Michaud 

Assessment of capillary phenomena in liquid composite molding

B. Caglar; C. Tekin; F. Karasu; V. Michaud 

Influence of the stacking sequence on the low-energy impact resistance of flax/PA11 composite

Y. Lebaupin; T-Q. T. Hoang; M. Chauvin; F. Touchard 

Soft Self-Healing Nanocomposites

R. V. S. P. Sanka; B. Krishnakumar; Y. Leterrier; S. Pandey; S. Rana et al. 

Pcm-based heat exchanger and uses thereof

V. Michaud; L. Fuentes Valenzuela; S. Haussener; M. Gani; M. Roulin et al. 

Shape memory alloys in fibre-reinforced polymer composites

A. Cohades; V. Michaud 

Bio-Inspired Fluorine-Free Self-Cleaning Polymer Coatings

L. Wasser; S. D. Vacche; F. Karasu; L. Mueller; M. Castellino et al. 

Progress in Self-Healing Fiber-Reinforced Polymer Composites

A. Cohades; C. Branfoot; S. Rae; I. Bond; V. Michaud 

In-plane permeability distribution mapping of isotropic mats using flow front detection

B. Caglar; D. Salvatori; E. M. Sozer; V. Michaud 

Organic-Inorganic Hybrid Planarization and Water Vapor Barrier Coatings on Cellulose Nanofibrils Substrates

F. Karasu; L. Mueller; H. Ridaoui; M. Ibn ElHaj; G. Flodberg et al. 

Composite Double-Network Hydrogels To Improve Adhesion on Biological Surfaces

P. Karami; C. S. Wyss; A. Khoushabi; A. Schmocker; M. Broome et al. 

Decellularised tissues obtained by a CO2-philic detergent and supercritical CO2

J. Antons; M. Marascio; P. Aeberhard; G. Weissenberger; N. Hirt-Burri et al. 

Cyclic loading of a cellulose/hydrogel composite increases its fracture strength

C. S. Wyss; P. Karami; P-E. Bourban; D. P. Pioletti 

Stitched shape memory alloy wires enhance damage recovery in self-healing fibre-reinforced polymer composites

A. Cohades; N. Hostettler; M. Pauchard; C. Plummer; V. Michaud 

Hierarchical porous structure

M. Marascio; P-E. Bourban; D. Pioletti