Publications

2023

Morphology of Nanostructured Tantalum Oxide Controls Stem Cell Differentiation and Improves Corrosion Behavior

Y. K. Erdogan; E. Uslu; M. K. Aydinol; A. S. Y. Saglam; S. Odabas et al. 

Acs Biomaterials Science & Engineering. 2023-12-11. Vol. 10, num. 1, p. 377-390. DOI : 10.1021/acsbiomaterials.3c01277.

Unraveling cartilage degeneration through synergistic effects of hydrostatic pressure and biomimetic temperature increase

Y. Guo; T. Stampoultzis; N. Nasrollahzadeh; P. Karami; V. K. Rana et al. 

Iscience. 2023-12-03. Vol. 26, num. 12, p. 108519. DOI : 10.1016/j.isci.2023.108519.

Enhancing Robustness of Adhesive Hydrogels through PEG-NHS Incorporation

E. Uslu; V. K. Rana; Y. Guo; T. Stampoultzis; F. Gorostidi et al. 

Acs Applied Materials & Interfaces. 2023-10-23. Vol. 15, num. 43, p. 50095-50105. DOI : 10.1021/acsami.3c13062.

Autologous and Allogeneic Cytotherapies for Large Knee (Osteo)Chondral Defects: Manufacturing Process Benchmarking and Parallel Functional Qualification

V. Philippe; A. Jeannerat; C. Peneveyre; S. Jaccoud; C. Scaletta et al. 

Pharmaceutics. 2023-09-01. Vol. 15, num. 9, p. 2333. DOI : 10.3390/pharmaceutics15092333.

Wet adhesive hydrogels to correct malacic trachea (tracheomalacia) A proof of concept

E. Uslu; V. K. Rana; S. Anagnostopoulos; P. Karami; A. Bergadano et al. 

Iscience. 2023-07-21. Vol. 26, num. 7, p. 107168. DOI : 10.1016/j.isci.2023.107168.

Bio-Enhanced Neoligaments Graft Bearing FE002 Primary Progenitor Tenocytes: Allogeneic Tissue Engineering & Surgical Proofs-of-Concept for Hand Ligament Regenerative Medicine

A. Jeannerat; J. Meuli; C. Peneveyre; S. Jaccoud; M. Chemali et al. 

Pharmaceutics. 2023-07-01. Vol. 15, num. 7, p. 1873. DOI : 10.3390/pharmaceutics15071873.

Comparison of the ALPS and PHILOS plating systems in proximal humeral fracture fixation – a retrospective study

A. Dewarrat; A. Terrier; B. Barimani; F. Vauclair 

Bmc Musculoskeletal Disorders. 2023-05-10. Vol. 24, num. 1, p. 371. DOI : 10.1186/s12891-023-06477-9.

Mimicking Loading-Induced Cartilage Self-Heating in Vitro Promotes Matrix Formation in Chondrocyte-Laden Constructs with Different Mechanical Properties

T. Stampoultzis; Y. Guo; N. Nasrollahzadeh; P. Karami; D. P. Pioletti 

Acs Biomaterials Science & Engineering. 2023-02-13. Vol. 9, num. 2, p. 651-661. DOI : 10.1021/acsbiomaterials.2c00723.

Industrial Biotechnology Conservation Processes: Similarities with Natural Long-Term Preservation of Biological Organisms

A. Laurent; C. Scaletta; P. Abdel-Sayed; W. Raffoul; N. Hirt-Burri et al. 

Biotech. 2023-01-31. Vol. 12, num. 1, p. 15. DOI : 10.3390/biotech12010015.

2022

Age- and sex-specific normative values of bone mineral density in the adult glenoid

P. Eghbali; F. Becce; P. Goetti; F. Vauclair; A. Farron et al. 

Journal Of Orthopaedic Research. 2022-06-01. DOI : 10.1002/jor.25379.

Polyethylene wear of dual mobility cups: a comparative analysis based on patient-specific finite element modeling

J. Wegrzyn; A. Antoniadis; E. Sarshari; M. Boubat; A. Terrier 

International Orthopaedics. 2022-01-12. Vol. 46, p. 779–787. DOI : 10.1007/s00264-022-05305-4.

Association of the Posterior Acromion Extension with Glenoid Retroversion: A CT Study in Normal and Osteoarthritic Shoulders

A. Terrier; F. Becce; F. Vauclair; A. Farron; P. Goetti 

Journal Of Clinical Medicine. 2022-01-01. Vol. 11, num. 2, p. 351. DOI : 10.3390/jcm11020351.

2021

A Matlab toolbox for scaled-generic modeling of shoulder and elbow

E. Sarshari; Y. Boulanaache; A. Terrier; A. Farron; P. Mullhaupt et al. 

Scientific Reports. 2021-10-21. Vol. 11, num. 1, p. 20806. DOI : 10.1038/s41598-021-99856-y.

Silk granular hydrogels self-reinforced with regenerated silk fibroin fibers

C. S. Wyss; P. Karami; A. Demongeot; P-E. Bourban; D. Pioletti 

Soft Matter. 2021-07-08. Vol. 17, num. 29, p. 7038-7046. DOI : 10.1039/D1SM00585E.

Thoughts on cartilage tissue engineering: A 21st century perspective

T. Stampoultzis; P. Karami; D. P. Pioletti 

Current Research in Translational Medicine. 2021-06-27. Vol. 69, num. 3, p. 103299. DOI : 10.1016/j.retram.2021.103299.

An Intrinsically-Adhesive Family of Injectable and Photo-Curable Hydrogels with Functional Physicochemical Performance for Regenerative Medicine

P. Karami; N. Nasrollahzadeh; C. Wyss; A. O’Sullivan; M. Broome et al. 

Macromolecular Rapid Communications. 2021-04-08.  p. 2000660. DOI : 10.1002/marc.202000660.

An Off-the-Shelf Tissue Engineered Cartilage Composed of Optimally Sized Pellets of Cartilage Progenitor/Stem Cells

J. Ran; Y. Fei; C. Wang; D. Ruan; Y. Hu et al. 

Acs Biomaterials Science & Engineering. 2021-03-08. Vol. 7, num. 3, p. 881-892. DOI : 10.1021/acsbiomaterials.9b01863.

Development of Standardized Fetal Progenitor Cell Therapy for Cartilage Regenerative Medicine: Industrial Transposition and Preliminary Safety in Xenogeneic Transplantation

A. Laurent; P. Abdel-Sayed; A. Ducrot; N. Hirt-Burri; C. Scaletta et al. 

Biomolecules. 2021-02-09. Vol. 11, num. 2, p. 250. DOI : 10.3390/biom11020250.

Pulsatile Flow-Induced Fatigue-Resistant Photopolymerizable Hydrogels for the Treatment of Intracranial Aneurysms

O. Poupart; R. Conti; A. Schmocker; L. Pancaldi; C. Moser et al. 

Frontiers in Bioengineering and Biotechnology. 2021-01-20. Vol. 8, p. 1567. DOI : 10.3389/fbioe.2020.619858.

Is preoperative glenoid bone mineral density associated with aseptic glenoid implant loosening in anatomic total shoulder arthroplasty?

S. Mariaux; R. Obrist; A. Farron; F. Becce; A. Terrier 

Bmc Musculoskeletal Disorders. 2021-01-08. Vol. 22, num. 1, p. 49. DOI : 10.1186/s12891-020-03892-0.

Muscle co-contraction in an upper limb musculoskeletal model: EMG-assisted vs. standard load-sharing

E. Sarshari; M. Mancuso; A. Terrier; A. Farron; P. Mullhaupt et al. 

Computer Methods in Biomechanics and Biomedical Engineering. 2021. Vol. 24, num. 2, p. 137-150. DOI : 10.1080/10255842.2020.1814755.

Feasibility of an alternative method to estimate glenohumeral joint center from videogrammetry measurements and CT/MRI of patients

E. Sarshari; M. Mancuso; A. Terrier; A. Farron; P. Mullhaupt et al. 

Computer Methods In Biomechanics And Biomedical Engineering. 2021. Vol. 24, num. 1, p. 33-42. DOI : 10.1080/10255842.2020.1808889.

Deep learning for the rapid automatic quantification and characterization of rotator cuff muscle degeneration from shoulder CT datasets

E. Taghizadeh; O. Truffer; F. Becce; S. Eminian; S. Gidoin et al. 

European Radiology. 2021. Vol. 31, p. 181–190. DOI : 10.1007/s00330-020-07070-7.

2020

Glenoid bone strain after anatomical total shoulder arthroplasty: In vitro measurements with micro-CT and digital volume correlation

Y. Boulanaache; F. Becce; A. Farron; D. Pioletti; A. Terrier et al. 

Medical Engineering & Physics. 2020-09-23. Vol. 85, num. November 2020, p. 48-54. DOI : 10.1016/j.medengphy.2020.09.009.

Predrilled locking compression plate is more accurate than tension band wiring in restoring articular geometry of the ulnar greater sigmoid notch after olecranon Chevron osteotomy

P. Goetti; D. A. Behrends; N. Gallusser; A. Terrier; F. Becce et al. 

Injury-International Journal Of The Care Of The Injured. 2020-07-01. Vol. 51, num. 7, p. 1597-1602. DOI : 10.1016/j.injury.2020.04.052.

Reduction of scapulohumeral subluxation with posterior augmented glenoid implants in anatomic total shoulder arthroplasty: Short-term 3D comparison between pre- and post-operative CT

A. Terrier; P. Goetti; F. Becce; A. Farron 

Orthopaedics & Traumatology-Surgery & Research. 2020-06-01. Vol. 106, num. 4, p. 681-686. DOI : 10.1016/j.otsr.2020.03.007.

Hybrid granular hydrogels: combining composites and microgels for extended ranges of material properties

C. S. Wyss; P. Karami; P-E. Bourban; D. P. Pioletti 

Soft Matter. 2020-04-21. Vol. 16, num. 15, p. 3769-3778. DOI : 10.1039/d0sm00213e.

In vitro Implementation of Photopolymerizable Hydrogels as a Potential Treatment of Intracranial Aneurysms

O. Poupart; A. Schmocker; R. Conti; C. Moser; K. M. Nuss et al. 

Frontiers in Bioengineering and Biotechnology. 2020-04-03. Vol. 8, p. 261. DOI : 10.3389/fbioe.2020.00261.

Light-Activated, Bioadhesive, Poly(2-hydroxyethyl methacrylate) Brush Coatings

J. Wang; P. Karami; N. C. Ataman; D. P. Pioletti; T. W. J. Steele et al. 

Biomacromolecules. 2020-01-01. Vol. 21, num. 1, p. 240-249. DOI : 10.1021/acs.biomac.9b01196.

Efficient decellularization of equine tendon with preserved biomechanical properties and cytocompatibility for human tendon surgery indications

P-A. Aeberhard; A. Grognuz; C. Peneveyre; S. McCallin; N. Hirt-Burri et al. 

Artificial Organs. 2020. Vol. 44, num. 4, p. E161-E171. DOI : 10.1111/aor.13581.

2019

Control of Dissipation Sources: A Central Aspect for Enhancing the Mechanical and Mechanobiological Performances of Hydrogels

N. Nasrollahzadeh; P. Karami; D. P. Pioletti 

ACS Applied Materials & Interfaces. 2019-10-30. Vol. 11, num. 43, p. 39662-39671. DOI : 10.1021/acsami.9b15450.

Knitted Silk-Collagen Scaffold Incorporated with Ligament Stem/Progenitor Cells Sheet for Anterior Cruciate Ligament Reconstruction and Osteoarthritis Prevention

D. Ruan; T. Zhu; J. Huang; H. Le; Y. Hu et al. 

ACS Biomaterials Science & Engineering. 2019-10-01. Vol. 5, num. 10, p. 5412-5421. DOI : 10.1021/acsbiomaterials.9b01041.

Automated CT bone segmentation using statistical shape modelling and local template matching

E. Taghizadeh; A. Terrier; F. Becce; A. Farron; P. Buchler 

Computer Methods In Biomechanics And Biomedical Engineering. 2019-09-03. Vol. 22, num. 16, p. 1303-1310. DOI : 10.1080/10255842.2019.1661391.

Patellar bone strain after total knee arthroplasty is correlated with bone mineral density and body mass index

A. Latypova; E. Taghizadeh; F. Becce; P. Büchler; B. M. Jolles et al. 

Medical Engineering & Physics. 2019. Vol. 68, p. 17-24. DOI : 10.1016/j.medengphy.2019.03.017.

2018

A statistical shape model to predict the premorbid glenoid cavity

D. Abler; S. Berger; A. Terrier; F. Becce; A. Farron et al. 

Journal Of Shoulder And Elbow Surgery. 2018-10-01. Vol. 27, num. 10, p. 1800-1808. DOI : 10.1016/j.jse.2018.04.023.

Composite Double-Network Hydrogels To Improve Adhesion on Biological Surfaces

P. Karami; C. S. Wyss; A. Khoushabi; A. Schmocker; M. Broome et al. 

ACS Applied Materials & Interfaces. 2018. Vol. 10, num. 45, p. 38692-38699. DOI : 10.1021/acsami.8b10735.

Tailoring swelling to control softening mechanisms during cyclic loading of PEG/cellulose hydrogel composites

A. Khoushabi; C. Wyss; B. Caglar; D. Pioletti; P-E. Bourban 

Composites Science and Technology. 2018. Vol. 168, p. 88-95. DOI : 10.1016/j.compscitech.2018.08.043.

Decellularised tissues obtained by a CO2-philic detergent and supercritical CO2

J. Antons; M. Marascio; P. Aeberhard; G. Weissenberger; N. Hirt-Burri et al. 

European Cells and Materials. 2018. Vol. 36, p. 81-95. DOI : 10.22203/eCM.v036a07.

Non-setting, injectable biomaterials containing particulate hydroxyapatite can increase primary stability of bone screws in cancellous bone

J. Solana Muñoz; U. Kettenberger; P. Procter; D. P. Pioletti 

Clinical Biomechanics. 2018. Vol. 59, p. 174-180. DOI : 10.1016/j.clinbiomech.2018.09.023.

Cyclic loading of a cellulose/hydrogel composite increases its fracture strength

C. S. Wyss; P. Karami; P-E. Bourban; D. P. Pioletti 

Extreme Mechanics Letters. 2018. Vol. 24, p. 66-74. DOI : 10.1016/j.eml.2018.09.002.

Exogenous stromal derived factor-1 releasing silk scaffold combined with intra-articular injection of progenitor cells promotes bone-ligament-bone regeneration

Y. Hu; J. Ran; Z. Zheng; Z. Jin; X. Chen et al. 

ACTA BIOMATERIALIA. 2018. Vol. 71, p. 168-183. DOI : 10.1016/j.actbio.2018.02.019.

Biomechanical comparison of glenoid implants with adaptable and fixed backside curvatures in anatomic total shoulder arthroplasty

A. Terrier; R. Obrist; V. Camine; F. Becce; A. Farron 

JOURNAL OF SHOULDER AND ELBOW SURGERY. 2018. Vol. 27, num. 9, p. 1656-1663. DOI : 10.1016/j.jse.2018.02.050.

Activation of AKT-mTOR Signaling Directs Tenogenesis of Mesenchymal Stem Cells

X. Cong; X. Rao; J. Lin; X. Liu; G. Zhang et al. 

STEM CELLS. 2018. Vol. 36, num. 4, p. 527-539. DOI : 10.1002/stem.2765.

Effect of temporal onsets of mechanical loading on bone formation inside a tissue engineering scaffold combined with cell therapy

T. Hausherr; K. Nuss; E. Thein; S. Krähenbühl; L. Applegate et al. 

Bone Reports. 2018. Vol. 8, p. 173-179. DOI : 10.1016/j.bonr.2018.04.008.

Depth-dependent mechanical properties of human articular cartilage obtained by indentation measurements

J. Antons; M. G. M. Marascio; J. Nohava; r. Martin; L. A. Laurent-Applegate et al. 

Journal of Materials Science: Materials in Medicine. 2018. Vol. 29, p. 57. DOI : 10.1007/s10856-018-6066-0.

Fatigue as the missing link between bone fragility and fracture

C. Acevedo; V. A. Stadelmann; D. Pioletti; T. Alliston; R. O. Ritchie 

Nature Biomedical Engineering. 2018. Vol. 2, p. 62-71. DOI : 10.1038/s41551-017-0183-9.

Effect of a collar on subsidence and local micromotion of cementless femoral stems: in vitro comparative study based on micro-computerised tomography

V. M. Camine; H. A. Ruediger; D. P. Pioletti; A. Terrier 

International Orthopaedics. 2018. Vol. 42, num. 1, p. 49-57. DOI : 10.1007/s00264-017-3524-0.

2017

3D Printing of Polymers with Hierarchical Continuous Porosity

M. G. M. Marascio; J. Antons; D. P. Pioletti; P-E. Bourban 

Advanced Materials Technologies. 2017. Vol. 2, num. 11, p. 1700145. DOI : 10.1002/admt.201700145.

A simulation framework for humeral head translations

E. Sarshari; A. Farron; A. Terrier; D. Pioletti; P. Müllhaupt 

Medical Engineering and Physics. 2017. Vol. 49, num. November, p. 140-147. DOI : 10.1016/j.medengphy.2017.08.013.

Effect of changes of femoral offset on abductor and joint reaction forces in total hip arthroplasty

H. A. Rudiger; M. Guillemin; A. Latypova; A. Terrier 

Archives of Orthopaedic and Trauma Surgery. 2017. Vol. 137, num. 11, p. 1579-1585. DOI : 10.1007/s00402-017-2788-6.

Cement stress predictions after anatomic total shoulder arthroplasty are correlated with preoperative glenoid bone quality

A. Terrier; R. Obrist; F. Becce; A. Farron 

Journal Of Shoulder And Elbow Surgery. 2017. Vol. 26, num. 9, p. 1644-1652. DOI : 10.1016/j.jse.2017.02.023.

Development of an effective cell seeding technique: simulation, implementation and analysis of contributing factors

N. Nasrollahzadeh Mamaghani; L. Applegate; D. Pioletti 

Tissue Engineering C. 2017. Vol. 23, num. 8, p. 485-496. DOI : 10.1089/ten.tec.2017.0108.

Fixed and mobile-bearing total ankle prostheses: Effect on tibial bone strain

A. Terrier; C. S. Fernandes; M. Guillemin; X. Crevoisier 

Clinical Biomechanics. 2017. Vol. 48, p. 57-62. DOI : 10.1016/j.clinbiomech.2017.07.009.

Ectopic tissue engineered ligament with silk collagen scaffold for ACL regeneration: A preliminary study

J. Ran; Y. Hu; H. Le; Y. Chen; Z. Zheng et al. 

Acta Biomaterialia. 2017. Vol. 53, p. 307-317. DOI : 10.1016/j.actbio.2017.02.027.

Dual mobility cups provide biomechanical advantages in situations at risk for dislocation: a finite element analysis

A. Terrier; A. Latypova; M. Guillemin; V. Parvex; O. Guyen 

International Orthopaedics. 2017. Vol. 41, num. 3, p. 551-556. DOI : 10.1007/s00264-016-3368-z.

Alignment of collagen fiber in knitted silk scaffold for functional massive rotator cuff repair

Z. Zheng; J. Ran; W. Chen; Y. Hu; T. Zhu et al. 

Acta Biomaterialia. 2017. Vol. 51, p. 317-329. DOI : 10.1016/j.actbio.2017.01.041.

Micromotion-induced peri-prosthetic fluid flow around a cementless femoral stem

V. Malfroy Camine; A. Terrier; D. Pioletti 

Computer Methods in Biomechanics and Biomedical Engineering. 2017. Vol. 20, num. 7, p. 730-736. DOI : 10.1080/10255842.2017.1296954.

A semi-automated quantitative CT method for measuring rotator cuff muscle degeneration in shoulders with primary osteoarthritis

A. Terrier; J. Ston; A. Dewarrat; F. Becce; A. Farron 

Orthopaedics & Traumatology: Surgery & Research. 2017. Vol. 103, p. 151-167. DOI : 10.1016/j.otsr.2016.12.006.

Importance of trabecular anisotropy in finite element predictions of patellar strain after Total Knee Arthroplasty

A. Latypova; D. Pioletti; A. Terrier 

Medical Engineering & Physics. 2017. Vol. 39, p. 102-105. DOI : 10.1016/j.medengphy.2016.10.003.

Human bone progenitor cells for clinical application: what kind of immune reaction does fetal xenograft tissue trigger in immuno-competent rats?

T. C. Hausherr; K. Nuss; E. Thein; L. A. Laurent-Applegate; D. Pioletti 

Cell Transplantation. 2017. Vol. 26, num. 5, p. 879-890. DOI : 10.3727/096368916X693789.

Effects of glenoid inclination and acromion index on humeral head translation and glenoid articular cartilage strain

C. Engelhardt; A. Farron; F. Becce; N. Place; D. P. Pioletti et al. 

Journal of Shoulder and Elbow Surgery. 2017. Vol. 26, num. 1, p. 157-164. DOI : 10.1016/j.jse.2016.05.031.

In vitro and in vivo investigation of bisphosphonate-loaded hydroxyapatite particles for peri-implant bone augmentation

U. Kettenberger; V. Luginbuehl; P. Procter; D. Pioletti 

Journal of Tissue Engineering and Regenerative Medicine. 2017. Vol. 11, p. 1974-1985. DOI : 10.1002/term.2094.

2016

Impact of individual anatomy on the benefit of cup medialisation in total hip arthroplasty

A. Terrier; V. Parvex; H. A. Rudiger 

Hip International. 2016. Vol. 26, num. 6, p. 537-542. DOI : 10.5301/hipint.5000392.

Full-field measurement of micromotion around a cementless femoral stem using micro-CT imaging and radiopaque markers

V. Malfroy Camine; H. Rüdiger; D. Pioletti; A. Terrier 

Journal of Biomechanics. 2016. Vol. 49, num. 16, p. 4002-4008. DOI : 10.1016/j.jbiomech.2016.10.029.

Identification of elastic properties of human patellae using micro-finite element analysis

A. Latypova; G. Maquer; K. Elankumaran; D. Pahr; P. Zysset et al. 

Journal of Biomechanics. 2016. Vol. 49, num. 13, p. 3111-3115. DOI : 10.1016/j.jbiomech.2016.07.031.

Experimental method to characterize the strain dependent permeability of tissue engineering scaffolds

N. Nasrollahzadeh Mamaghani; D. Pioletti 

Journal of Biomechanics. 2016. Vol. 49, p. 3749-3752. DOI : 10.1016/j.jbiomech.2016.09.021.

Stability enhancement using hyaluronic acid gels for delivery of human fetal progenitor tenocytes

A. Grognuz; C. Scaletta; A. Farron; D. Pioletti; W. Raffoul et al. 

Cell Medicine. 2016. Vol. 8, p. 87-97. DOI : 10.3727/215517916X690486.

Impact of the Femoral Head Position on Moment Arms in Total Hip Arthroplasty: A Parametric Finite Element Study

H. A. Ruediger; V. Parvex; A. Terrier 

Journal Of Arthroplasty. 2016. Vol. 31, num. 3, p. 715-720. DOI : 10.1016/j.arth.2015.09.044.

A photopolymerized composite hydrogel and surgical implanting tool for a nucleus pulposus replacement

A. Schmocker; A. Khoushabi; D. A. Frauchiger; B. Gantenbein; C. Schizas et al. 

Biomaterials. 2016. Vol. 88, p. 110-119. DOI : 10.1016/j.biomaterials.2016.02.015.

Modelling of the human shoulder as a parallel mechanism without constraints

D. Ingram; C. Engelhardt; A. Farron; A. Terrier; P. Müllhaupt 

Mechanism and Machine Theory. 2016. Vol. 100, p. 120-137. DOI : 10.1016/j.mechmachtheory.2016.02.004.

Anti-microbial dendrimers against multidrug-resistant P. aeruginosa enhance the angiogenic effect of biological burn-wound bandages

P. Abdel-Sayed; A. Kaeppli; T. Siriwardena; T. Darbre; K. Perron et al. 

Scientific Reports. 2016. Vol. 6, p. 22020. DOI : 10.1038/srep22020.

Biomechanical Role of Bone Anisotropy Estimated on Clinical CT Scans by Image Registration

E. Taghizadeh; M. Reyes; P. Zysset; A. Latypova; A. Terrier et al. 

Annals of Biomedical Engineering. 2016. Vol. 44, num. 8, p. 2505-2517. DOI : 10.1007/s10439-016-1551-4.

A patient-specific model of total knee arthroplasty to estimate patellar strain: A case study

A. Latypova; A. Arami; F. Becce; B. Jolles-Haeberli; K. Aminian et al. 

Clinical Biomechanics. 2016. Vol. 32, p. 212-219. DOI : 10.1016/j.clinbiomech.2015.11.008.

Biodegradable HEMA-based hydrogels with enhanced mechanical properties

M. N. Moghadam; D. Pioletti 

Journal of Biomedical Materials Research Part B. 2016. Vol. 104, p. 1161-1169. DOI : 10.1002/jbm.b.33469.

2015

Miniature probe for the delivery and monitoring of a photopolymerizable material

A. Schmocker; A. Khoushabi; C. Schizas; P-E. Bourban; D. Pioletti et al. 

Journal of Biomedical Optics. 2015. Vol. 20, num. 12, p. 127001. DOI : 10.1117/1.Jbo.20.12.127001.

Improving anterior deltoid activity in a musculoskeletal shoulder model – an analysis of the torque-feasible space at the sternoclavicular joint

D. Ingram; C. Engelhardt; A. Farron; A. Terrier; P. Muellhaupt 

Computer Methods In Biomechanics And Biomedical Engineering. 2015. Vol. 19, num. 4, p. 450-463. DOI : 10.1080/10255842.2015.1042465.

Effect of partial-thickness tear on loading capacities of the supraspinatus tendon: a finite element analysis

C. Engelhardt; D. Ingram; P. Müllhaupt; A. Farron; F. Becce et al. 

Computer Methods in Biomechanics and Biomedical Engineering. 2015. Vol. 19, num. 8, p. 875-882. DOI : 10.1080/10255842.2015.1075012.

Effect of humeral stem design on humeral position and range of motion in reverse shoulder arthroplasty

A. Lädermann; P. J. Denard; P. Boileau; A. Farron; P. Deransart et al. 

International Orthopaedics. 2015. Vol. 39, num. 11, p. 2205-2213. DOI : 10.1007/s00264-015-2984-3.

Photo-polymerization, swelling and mechanical properties of cellulose fibre reinforced poly(ethylene glycol) hydrogels

A. Khoushabi; A. Schmocker; D. Pioletti; C. Moser; C. Schizas et al. 

Composites Science and Technology. 2015. Vol. 119, p. 93-99. DOI : 10.1016/j.compscitech.2015.10.002.

Importance of a three-dimensional measure of humeral head subluxation in osteoarthritic shoulders

A. Terrier; J. Ston; A. Farron 

Journal Of Shoulder And Elbow Surgery. 2015. Vol. 24, num. 2, p. 295-301. DOI : 10.1016/j.jse.2014.05.027.

Novel micropatterns mechanically control fibrotic reactions at the surface of silicone implants

H. Majd; S. Scherer; S. Boo; S. Ramondetti; E. Cambridge et al. 

Biomaterials. 2015. Vol. 54, p. 136-137. DOI : 10.1016/j.biomaterials.2015.03.027.

Variability of the pullout strength of cancellous bone screws with cement augmentation

P. Procter; P. Bennani; C. Brown; J. Arnoldi; D. Pioletti et al. 

Clinical Biomechanics -Bristol-. 2015. num. 5, p. 500-506. DOI : 10.1016/j.clinbiomech.2015.03.003.

Comparison of an EMG-based and a stress-based method to predict shoulder muscle forces

C. Engelhardt; V. M. Camine; D. Ingram; P. Muellhaupt; A. Farron et al. 

Computer Methods In Biomechanics And Biomedical Engineering. 2015. Vol. 18, num. 12, p. 1272-1279. DOI : 10.1080/10255842.2014.899587.

Time course of bone screw fixation following a local delivery of zoledronate in a rat femoral model – a micro-finite element analysis

U. Kettenberger; A. Latypova; A. Terrier; D. Pioletti 

Journal of the Mechanical Behavior of Biomedical Materials. 2015. Vol. 45, p. 22-31. DOI : 10.1016/j.jmbbm.2015.01.007.

Muscle Moment-Arms: A Key Element in Muscle-Force Estimation

D. Ingram; C. A. Engelhardt; A. Farron; A. Terrier; P. Müllhaupt 

Computer Methods in Biomechanics and Biomedical Engineering. 2015. Vol. 18, num. 5, p. 506-513. DOI : 10.1080/10255842.2013.818666.

Impact of synovial fluid flow on temperature regulation in knee cartilage

M. Nassajian Moghadam; P. Abdel-Sayed; V. Malfroy Camine; D. Pioletti 

Journal of Biomechanics. 2015. Vol. 48, p. 370-374. DOI : 10.1016/j.jbiomech.2014.11.008.

Improving hydrogels’ toughness by increasing the dissipative properties of their network

M. Nassajian Moghadam; D. Pioletti 

Journal of the Mechanical Behavior of Biomedical Materials. 2015. Vol. 41, p. 161-167. DOI : 10.1016/j.jmbbm.2014.10.010.

Mechanical evaluation of a tissue-engineered zone of calcification in a bone-hydrogel osteochondral construct

J. Hollenstein; A. Terrier; E. Cory; A. C. Chen; R. L. Sah et al. 

Computer Methods in Biomechanics and Biomedical Engineering. 2015. Vol. 18, num. 3, p. 332-337. DOI : 10.1080/10255842.2013.794898.

2014

Benefit of Cup Medialization in Total Hip Arthroplasty is Associated With Femoral Anatomy

A. Terrier; F. L. Florencio; H. A. Ruediger 

Clinical Orthopaedics And Related Research. 2014. Vol. 472, num. 10, p. 3159-3165. DOI : 10.1007/s11999-014-3787-3.

Does locally delivered Zoledronate influence peri-implant bone formation? – Spatio-temporal monitoring of bone remodeling in vivo

U. Kettenberger; J. Ston; E. Thein; P. Procter; D. Pioletti 

Biomaterials. 2014. Vol. 35, p. 9995-10006. DOI : 10.1016/j.biomaterials.2014.09.005.

Photopolymerizable hydrogels for implants: Monte-Carlo modeling and experimental in vitro validation

A. Schmocker; A. Khoushabi; C. Schizas; P-E. Bourban; D. Pioletti et al. 

Journal of Biomedical Optics. 2014. Vol. 19, num. 3, p. 035004. DOI : 10.1117/1.Jbo.19.3.035004.

Measurements of three-dimensional glenoid erosion when planning the prosthetic replacement of osteoarthritic shoulders

A. Terrier; J. Ston; X. Larrea; A. Farron 

Bone & Joint Journal. 2014. Vol. 96B, num. 4, p. 513-518. DOI : 10.1302/0301-620X.96B4.32641.

Development and experimental validation of a finite element model of total ankle replacement

A. Terrier; X. Larrea; J. Guerdat; X. Crevoisier 

Journal of Biomechanics. 2014. Vol. 47, num. 3, p. 742-5. DOI : 10.1016/j.jbiomech.2013.12.022.

The role of energy dissipation of polymeric scaffolds in the mechanobiological modulation of chondrogenic expression

P. Abdel-Sayed; S. E. Darwiche; U. Kettenberger; D. Pioletti 

Biomaterials. 2014. Vol. 35, num. 6, p. 1890-1897. DOI : 10.1016/j.biomaterials.2013.11.048.

Intrinsic viscoelasticity increases temperature in knee cartilage under physiological loading

P. Abdel-Sayed; M. Nassajian Moghadam; R. Salomir; D. Tchernin; D. Pioletti 

Journal of the Mechanical Behavior of Biomedical Materials. 2014. Vol. 30, p. 123-130. DOI : 10.1016/j.jmbbm.2013.10.025.

Controlled release from a mechanically-stimulated thermosensitive self-heating composite hydrogel

M. Nassajian Moghadam; V. Kolesov; H-A. Klok; D. Pioletti 

Biomaterials. 2014. Vol. 35, p. 450-455. DOI : 10.1016/j.biomaterials.2013.09.065.

Translation of biomechanical concepts in bone tissue engineering: from animal study to revision knee arthroplasty

A. Roshan Ghias; A. Terrier; B. Jolles-Haeberli; D. Pioletti 

Computer Methods in Biomechanics and Biomedical Engineering. 2014. Vol. 17, num. 8, p. 845-852. DOI : 10.1080/10255842.2012.719607.

2013

Activities of daily living with reverse prostheses: importance of scapular compensation for functional mobility of the shoulder

A. Terrier; P. Scheuber; D. P. Pioletti; A. Farron 

Journal Of Shoulder And Elbow Surgery. 2013. Vol. 22, num. 7, p. 948-953. DOI : 10.1016/j.jse.2012.09.014.

Cartilage self-heating contributes to chondrogenic expression

P. Abdel-Sayed; A. Vogel; M. Nassajian Moghadam; D. Pioletti 

European Cells and Materials. 2013. Vol. 26, p. 171-178. DOI : 10.22203/eCM.v026a12.

Design and test of a MEMS strain-sensing device for monitoring artificial knee implants

W. Hasenkamp; N. Thevenaz; J. Villard; A. Bertsch; A. Arami et al. 

Biomedical Microdevices. 2013. Vol. 15, num. 5, p. 831-839. DOI : 10.1007/s10544-013-9770-z.