EDAM Published theses


Laser-based manufacturing of freeform glass micro-optics through topological transformation

S. Y. Benketaf / Y. Bellouard (Dir.)  

Lausanne, EPFL, 2024. 

Identification and Mitigation of Degradation Mechanisms Induced by Heat and Light in NiOx-based Perovskite Solar Cells

M. S. M. Dussouillez / C. Ballif; A. Paracchino (Dir.)  

Lausanne, EPFL, 2024. 


Process development of pre-impregnated hybrid thin-ply composites

A. Argyropoulos / V. Michaud (Dir.)  

Lausanne, EPFL, 2023. 

A multi scale consolidation model for press moulding of hybrid textiles into complex geometries

V. Werlen / V. Michaud; C. Rytka (Dir.)  

Lausanne, EPFL, 2023. 

On the interaction of femtosecond laser pulses with layered dielectric materials

R. Ricca / Y. Bellouard (Dir.)  

Lausanne, EPFL, 2023. 

A hybrid Selective Laser Sintering based process for the additive manufacturing of architectured composites

E. P. Guenier / R. Logé; A. Schorderet (Dir.)  

Lausanne, EPFL, 2023. 

Femtosecond laser-induced modifications and self-organization in complex glass systems

G. Torun / Y. Bellouard (Dir.)  

Lausanne, EPFL, 2023. 

In situ monitoring of femtosecond laser-induced modifications in dielectrics

O. Bernard / Y. Bellouard (Dir.)  

Lausanne, EPFL, 2023. 

Multi-scale characterization and modeling of notched strength and translaminar fracture in hybrid thin-ply composites based on different carbon fiber grades

G. C. Broggi / V. Michaud; J. Cugnoni (Dir.)  

Lausanne, EPFL, 2023. 

Computational design and additive manufacturing of electromagnetic coils

A. J-M. Thabuis / Y. Perriard (Dir.)  

Lausanne, EPFL, 2023. 

Towards Robust Monitoring of the Laser Powder Bed Fusion Process based on Acoustic Emission combined with Machine Learning Solutions

R. Drissi Daoudi / R. Logé; K. T. Wasmer (Dir.)  

Lausanne, EPFL, 2023. 


Effect of femtosecond laser-induced high pressure on fused silica polymorphism

A. Radhakrishnan / Y. Bellouard (Dir.)  

Lausanne, EPFL, 2022. 

Load cell with positive, negative and zero stiffness operating modes for milli- to nanonewton contact force monitoring in electrical probing

M. S. Smreczak / S. N. Henein; C. Baur (Dir.)  

Lausanne, EPFL, 2022. 

Investigation of femtosecond laser-enabled 3D micro-infiltration processes

E. Casamenti / Y. Bellouard (Dir.)  

Lausanne, EPFL, 2022. 


Understanding Thermomechanical Treatments Induced by Laser Powder Bed Fusion Process

H. Ghasemi Tabasi / R. Logé; J. Jhabvala (Dir.)  

Lausanne, EPFL, 2021. 

Laser powder-bed fusion of metallic alloys with enhanced microstructures and properties

N. Sohrabi / R. Logé; J. Jhabvala (Dir.)  

Lausanne, EPFL, 2021. 

A dynamic scheduling tool and a methodology for creating digital twin of manufacturing systems for achieving Zero Defect Manufacturing

F. Psarommatis Giannakopoulos / D. Kyritsis (Dir.)  

Lausanne, EPFL, 2021. 


Investigation of femtosecond laser-tuned thermomechanical properties of fused silica

P. Vlugter / Y. Bellouard (Dir.)  

Lausanne, EPFL, 2020. 

Flexure-based mecano-optical multi-degree-of-freedom transducers dedicated to medical force sensing instruments

S. K. Fifanski / S. N. Henein; C. Baur (Dir.)  

Lausanne, EPFL, 2020. 

Flexure Pivot Oscillators for Mechanical Watches

E. F. G. Thalmann / S. N. Henein; I. Vardi (Dir.)  

Lausanne, EPFL, 2020. 


Towards semantics-driven modelling and simulation of context-aware manufacturing systems

D. N. Arena / D. Kyritsis (Dir.)  

Lausanne, EPFL, 2019. 


A new hybrid Additive Manufacturing process combining Selective Laser Melting and Laser Shock Peening

N. Kalentics / R. Logé; E. Boillat (Dir.)  

Lausanne, EPFL, 2018. 


Gas Sampling Using Convection and Humidity Stabilization to Improve Point Gas Sensor Responses

E. A. Hammes / P. Ryser; H. Knapp (Dir.)  

Lausanne, EPFL, 2016.