Articles

Parallel framework for intelligent prediction of multi-site fugitive dust: Combined with DustLSTM-Trans and FedProx-Dyn

F. Lin; L. Xu; C. Lyu; Y. Chen; Z. Ma et al. 

Advanced Engineering Informatics. 2026. Vol. 70, p. 104155. DOI : 10.1016/j.aei.2025.104155.

Highly dispersed and low-cost N-doped carbon dots enhancing the hydration kinetics of tricalcium silicate: A multiscale investigation

H. He; X. Wang; Y. Wang; J. Hong; S. E et al. 

Carbon. 2026. Vol. 247, p. 121083. DOI : 10.1016/j.carbon.2025.121083.

Exploration of computational formulations for wind-induced interference effects on high-rise buildings via Kolmogorov–Arnold networks

K. Wang; T. Shen; J. Liu; S. Wang; X. Bao et al. 

Developments in the Built Environment. 2025. Vol. 24, p. 100770. DOI : 10.1016/j.dibe.2025.100770.

An explainable ensemble learning framework for flexible pavement roughness prediction under multi-climate stressors

Q. Xu; C. Zhang; S. Geng; S. Wang; J. Li et al. 

Case Studies in Construction Materials. 2025. Vol. 23, p. e05402. DOI : 10.1016/j.cscm.2025.e05402.

Hydration and strength development of low-clinker (<50 %) factor limestone calcined clay cements (LC3): A comparative study with natural pozzolans

F. Zunino; K. Scrivener 

Construction and Building Materials. 2025. Vol. 499, p. 144075. DOI : 10.1016/j.conbuildmat.2025.144075.

Power ultrasound-driven silane-modified cement paste: Insights into microstructural evolution, hydrophobic and mechanical performance

G. Xiong; Y. Zhao; Z. Fang; Y. Li; Y. Ren et al. 

Ultrasonics Sonochemistry. 2025. Vol. 122, p. 107591. DOI : 10.1016/j.ultsonch.2025.107591.

Synergistic effect of waste concrete powder and traditional SCMs in preparing clinker-free cement: Hydration and microstructure evolution

R. Jia; B. Ran; T. Lv; Y. Yu; X. Hu et al. 

Construction and Building Materials. 2025. Vol. 491, p. 142798. DOI : 10.1016/j.conbuildmat.2025.142798.

Impact of pore solution composition and superplasticizers on the interparticle forces and rheology of metakaolin suspensions

S. Real; P. Bowen; R. Moreno; L. González-Panicello; F. Puertas et al. 

Cement and Concrete Research. 2025. Vol. 195, p. 107901. DOI : 10.1016/j.cemconres.2025.107901.

Machine Learning-assisted Sustainable Mix Design of Waste Glass Powder Concrete with Strength-cost-co2 Emissions Trade-offs

Y. Zhang; J. Peng; Z. Wang; M. Xi; J. Liu et al. 

BUILDINGS. 2025. Vol. 15, num. 15. DOI : 10.3390/buildings15152640.

New insights into the reaction mechanisms of calcium-based activators modified sodium carbonated activated slag: Precursor dissolution and carboaluminate generation

J. Wang; D. Shi; F. Chen; K. Yu; L. Xu et al. 

Construction and Building Materials. 2025. Vol. 485, p. 141817. DOI : 10.1016/j.conbuildmat.2025.141817.

Achieving strength-ductility synergy in AISI 904L superaustenitic alloy through severe plastic deformation and post-deformation annealing

M. Roostaei; M. J. Sohrabi; S. Wurster; O. Renk; A. Kalhor et al. 

Materials Science and Engineering: A. 2025. Vol. 935, p. 148382. DOI : 10.1016/j.msea.2025.148382.

Quantification of nano-crystalline C-S-H in hydrated tricalcium silicate, Portland cement and fly ash cement using PONKCS method

X. Li; K. L. Scrivener 

CEMENT AND CONCRETE RESEARCH. 2025. Vol. 191. DOI : 10.1016/j.cemconres.2025.107837.

Investigating the ball-milled calcined coal gangue on the hydration of limestone blended cement

S. Wang; Q. Wang; L. Xu; J. Ma; Q. Shi et al. 

Construction and Building Materials. 2025. Vol. 472, p. 140836. DOI : 10.1016/j.conbuildmat.2025.140836.

Influence of sulphur content on the hot deformation behaviour and constitutive description of Cu-DHP alloy

A. Kalhor; K. Rodak; M. J. Sohrabi; M. Maleki; M. Mobasheri et al. 

CANADIAN METALLURGICAL QUARTERLY. 2025. DOI : 10.1080/00084433.2025.2486614.

Microscopic Mechanical Properties and Physicochemical Changes of Cement Paste Exposed to Elevated Temperatures and Subsequent Rehydration

L. Xu; X. Hu; R. Tang; X. Zhang; Y. Xia et al. 

Materials. 2025. Vol. 18, num. 5. DOI : 10.3390/ma18051050.

Performance Enhancement of Austenitic Stainless Steels Based on the Adjustment of Grain Size by Reversion, Recrystallization, and Grain Growth

A. Kalhor; M. J. Sohrabi; M. Mobasheri; K. Rodak; C. Dehghanian et al. 

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION. 2025. DOI : 10.1002/maco.202414715.

Kurtosis as a Decisive Topographic Parameter for Pitting Attack of AISI 304L Stainless Steel

A. Kalhor; M. J. Sohrabi; M. Mobasheri; K. Rodak; C. Dehghanian et al. 

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION. 2025. DOI : 10.1002/maco.202414782.

Greenhouse Gas Emissions and Decarbonization Potential of Global Fired Clay Brick Production

J. A. Olsson; H. Hafez; S. A. Miller; K. L. Scrivener 

ENVIRONMENTAL SCIENCE & TECHNOLOGY. 2025. DOI : 10.1021/acs.est.4c08994.

Evaluation of the Work-Hardening Behavior of AISI 304L and AISI 904L Austenitic Stainless Steels by Miniature Testing Techniques

A. Kalhor; M. J. Sohrabi; S. Sadeghpour; M. Mobasheri; H. Mirzadeh et al. 

Journal of Materials Engineering and Performance. 2025. DOI : 10.1007/s11665-025-12067-8.

CementFF4: Formal atomic charge polarizable force field for cementitious systems – Bulk and surface

Z. Casar; T. B. Montandon; M. Cordova; K. Scrivener; P. Bowen et al. 

Cement and Concrete Research. 2025. Vol. 187, p. 107708. DOI : 10.1016/j.cemconres.2024.107708.