Anodic dissolution mechanisms of iron in bentonite slurries

P. V. Kulkarni; A. Igual-Munoz; J. M. Sallese; S. Mischler 

Studying archaeological iron corrosion in the ground – Sample handling to avoid undesirable changes

E. Granget; O. Cocen; S. Azad; L. Brambilla 

Alumina/metal tribopairs: Which is the wearing element under tribocorrosion conditions?

A. I. Muñoz; A. Dalmau; S. Mischler 

Corrosion Behavior of Heat-Treated Fe-Based Shape Memory Alloys

P. V. Kulkarni; M. J. Oza; A. Igual-Munoz; J. M. Sallese; M. Shahverdi et al. 

Impact of oxygen release from bentonite on microbial activity, mineralogy, and steel corrosion

N. Jakus; P. V. Kulkarni; C. Dreher; S. Bruggmann; D. Grolimund et al. 

Cover Picture: Materials and Corrosion. 1/2025

P. V. Kulkarni; M. J. Oza; A. Igual‐Munoz; J. Sallese; M. Shahverdi et al. 

Lubrication of the watch pivot contact: a multi-physics approach

Microstructure and shape memory behavior of a bi-layer fabricated by NiTi deposition on NiTiCu substrate using laser powder bed fusion

M. Memarian; M. Mohri; C. Leinenbach; P. V. Kulkarni; E. Ghafoori et al. 

Neutron tomography and image registration methods to study local physical deformations and attenuation variations in treated archaeological iron nail samples

M. Shakoorioskooie; E. Granget; O. Cocen; J. Hovind; D. Mannes et al. 

Developing a quantitative multimodal and multi-scale, fully non-destructive technique for the study of iron archaeological artefacts

E. Granget; O. Cocen; M. Shakoorioskooie; Q. Zhan; M. N. Lumongsod-Thompson et al. 

Unique corrosion behavior of an archaeological Roman iron ring: Microchemical characterization and thermodynamic considerations

V. Valbi; F. E. Furcas; D. Neff; P. Dillmann; U. Angst et al. 

Microstructure – Electrochemical Surface Reactivity Relationship of Electrochemically Grown Manganese Oxides Films

Tribological responses of steels to different surface films generated in oil lubricants

S. Cao; Z. Xu; Y. Liang; S. Mischler 

Data analysis techniques for the visualization and classification of historical vehicle engines’ health status using data-driven solutions

S. Carrino; L. Meyer; J. Dreyer; B. Chalancon; A. Roda-Buch et al. 

Assessing the wear degradation of tungsten in acidic solutions using a lubricated tribocorrosion model

S. Cao; Z. Xu; Y. Liang; S. Mischler 

Methods for Calibrating the Electrochemical Quartz Crystal Microbalance: Frequency to Mass and Compensation for Viscous Load

C-O. A. Olsson; A. N. Igual-Munoz; S. Mischler 

Influence of Different Sterilization Methods on the Surface Chemistry and Electrochemical Behavior of Biomedical Alloys

A. Igual-Munoz; J-L. Genilloud; B. M. Jolles; S. Mischler 

Enhanced Leaching of Zinc Ferrite by the Formation of a Solid Solution With Magnetite in Hydrochloric Acid Solution

M. N. Lumongsod; J. Gamutan; K. Hara; Y. Sasaki; T. Nagasaka 

Wear behaviour of novel copper alloy as an alternative to copper-beryllium

B. Rouxel; S. Mischler; R. Loge; A. I. Munoz 

In-vivo investigation of electrochemical behavior of Ti and CoCrMo alloy in human synovial fluids

Investigation of thermoelectric nanomaterials

Experimental investigation of surface roughness effect on a free-flight sphere in a Ludwieg tube

S-H. Park; E. Kim; M. H. Han; S. H. Park; Y. H. Byun et al. 

Development of microdevices for the in-plane thermoelectric characterization of deposited films

D. Osenberg; C. V. Manzano; M. Martin-Gonzalez; N. Stein; M. De Vos et al. 

Adsorption of organic matter on titanium surfaces with nano- and micro-scale roughness studied with the electrochemical quartz crystal microbalance dissipation technique

C-O. A. Olsson; A. N. Igual-Munoz; S. Mischler 

Investigation of residual stresses in planar dissimilar magnetic pulse welds by neutron diffraction

Avettand-Fenoel; T. Sapanathan; T. Pirling; G. Racineux; A. Simar et al. 

A comparative surface analysis of explanted hip joint prostheses made of different biomedical alloys

A. Bermudez-Castaneda; J. Esguerra Arce; A. Esguerra-Arce; S. Valentina Vargas-Pabon; J. Guillermo Ortiz-Martinez et al. 

Acoustic emission techniques for the detection of simulated failures in historical vehicles engines

L. Brambilla; B. Chalancon; A. R. Buch; E. Cornet; G. Rapp et al. 

The Role of Geometrical Parameters in the Lubrication of the Swiss Lever Escapement

A. Roda-Buch; V. A. M. Magnin; S. G. Maldonado; S. Mischler 

Re-entry analysis of critical components and materials for design-for-demise techniques

S-H. Park; S. Mischler; P. Leyland 

A lubricated tribocorrosion model incorporating surface roughness

S. Cao; S. Mischler 

Modeling Current Transients in a Reciprocal Motion Tribocorrosion Experiment

C-O. A. Olsson; A. N. I. Munoz; S. Cao; S. Mischler 

A Crevice Corrosion Model for Biomedical Trunnion Geometries and Surfaces Feature

Á. Bermúdez Castañeda; A. N. Igual Muñoz; S. Mischler 

Early Precipitation Stages of Sigma Phase in Alloy 28 Studied with Scanning Electron Microscopy and Atom Probe Tomography

C-O. A. Olsson; M. Hattestrand; H. Magnusson; D. Shinde; M. Thuvander 

Passages sédunois; restructuration du site des anciens pénitenciers de Sion (VS)

L. Roy 

Tribological behaviour of galvanic gold coatings reinforced with silica nanoparticles

G. Heymans; A. N. Igual Muñoz; S. Mischler 

Fretting-corrosion behavior of electroless Ni-P/Ni-P-TiO2 coatings obtained on AZ91D magnesium alloy by a chromium-free process

D. F. Carrillo; A. Bermudez; M. A. Gomez; A. A. Zuleta; J. G. Castano et al. 

Tribological properties of gold matrix composite coatings with carbon nanocapsules containing ionic liquid lubricants

A. I. Munoz; N. Alonso-Morales; J. Palomar; M. A. Gilarranz; S. Mischler 

Re-entry survival analysis and ground risk assessment of space debris considering by-products generation

S-H. Park; J. Navarro Laboulais; P. Leyland; S. Mischler 

Tribocorrosion of a CoCrMo alloy in sulfuric acid – Glycerol mixtures

S. Cao; S. Mischler 

Laser coating of a Zr-based metallic glass on an aluminum substrate

N. Sohrabi; R. S. Panikar; J. Jhabvala; A. Roda Buch; S. Mischler et al. 

Influence of Bovine Serum Albumin (BSA) on the Tribocorrosion Behaviour of a Low Carbon CoCrMo Alloy in Simulated Body Fluids

C. Yoneyama; S. Cao; A. Igual Munoz; S. Mischler 

Tribocorrosion behaviour of pure titanium in bovine serum albumin solution: A multiscale study

E. Liamas; O. R. T. Thomas; A. Igual Munoz; Z. J. Zhang 

An Overview of Serum Albumin Interactions with Biomedical Alloys

O. Klok; A. I. Munoz; S. Mischler 

Tribological Approach to the Watch Movements

Friction in silicon dioxide micro-contacts

‘Green’ Cr(III)-based electrodeposition of stainless steel-like FeCrNi: synthesis, mechanisms, material properties of films and micro-nanocomponents for bio-medical applications

Corrosion behaviour of Ti6A14V ELI nanotubes for biomedical applications

J. Lario; M. Viera; A. Vicente; A. Igual; V. Amigo 

Effect of the electrochemical characteristics of titanium on the adsorption kinetics of albumin

E. Liamas; O. R. T. Thomas; A. Igual Munoz; Z. J. Zhang 

A methodology for characterizing the electrochemical stability of DLC coated interlayers and interfaces

E. Ilic; A. Pardo; T. Suter; S. Mischler; P. Schmutz et al. 

‘Green’ Cr(iii)-glycine electrolyte for the production of FeCrNi coatings: electrodeposition mechanisms and role of by-products in terms of coating composition and microstructure

E. Bertero; C. V. Manzano; E. Pellicer; J. Sort; R. M. Ulfig et al. 

Chemo-mechanical effects on the tribocorrosion behavior of titanium/ceramic dental implant pairs in artificial saliva

A. Dalmau Borras; A. R. Buch; A. Rovira Cardete; J. Navarro-Laboulais; A. I. Munoz 

Tribological and tribocorrosion behavior of nickel sliding against oxide ceramics

J. Du; S. Cao; A. I. Munoz; S. Mischler 

Residual stresses of friction melt bonded aluminum/steel joints determined by neutron diffraction

N. Jimenez-Mena; T. Sapanathan; J. M. Drezet; T. Pirling; P. J. Jacques et al. 

Electrochemical Co-Deposition of Gold and Carbon Nanocapsules from a Colloidal Suspension

A. I. Munoz; N. Alonso-Morales; J. Palomar; M. A. Gilarranz; S. Mischler 

Silicon Corrosion in Neutral Media: The Influence of Confined Geometries and Crevice Corrosion in Simulated Physiological Solutions

E. Ilic; A. Pardo; R. Hauert; P. Schmutz; S. Mischler 

Tribological response of multilayered gold nickel coating deposited on fine turned surfaces

V. Magnin; S. Mischler 

Corrosion Mechanisms of Diamond-like Carbon Coated Interlayers & Interfaces

Appearance of polished 18 karat gold surfaces: linking aesthetics to surface features

Fretting corrosion between bone and calcium phosphate-calcium titanate coatings

J. Esguerra-Arce; A. B. Castaneda; A. Esguerra-Arce; Y. Aguilar; S. Mischler 

Miniaturized tube fixed plug drawing: determination of the friction coefficients and drawing limit of 316 LVM stainless steel

E. Rosset; S. Dobler; B. De Marco; V. Nguyen; S. Mischler et al. 

Chemical and morphological characterization of commercial tinplate for food packaging

F. Caiazzo; L. Brambilla; A. Montanari; S. Mischler 

Electrodeposition of amorphous Fe-Cr-Ni stainless steel alloy with high corrosion resistance, low cytotoxicity and soft magnetic properties

E. Bertero; M. Hasegawa; S. Staubli; E. Pellicer; I. Herrmann et al. 

Degradation mechanisms in martensitic stainless steels: Wear, corrosion and tribocorrosion appraisal

A. Dalmau; C. Richard; A. Igual-Munoz 

Degradation of heritage cans: Monitoring of museums’ collections

L. Brambilla; F. Caiazzo; A. Michel; S. Mischler; R. Bertholon 

Wear model for describing the time dependence of the material degradation mechanisms of the AISI 316L in a NaCl solution

A. Dalmau; A. Buch; A. Rovira; J. Navarro-Laboulais; A. Munoz 

Modeling tribocorrosion of passive metals – A review

S. Cao; S. Mischler 

Degradation of modular hip joint implants : a corrosion and tribocorrosion approach

Corrosion mechanisms and durability models for historical tinplate food cans

Micro-mechanics of 3D architectured metals synthesized by electrodeposition

Micromechanics of Amorphous Metal/Polymer Hybrid Structures with 3D Cellular Architectures: Size Effects, Buckling Behavior, and Energy Absorption Capability

M. Mieszala; M. Hasegawa; G. Guillonneau; J. Bauer; R. Raghavan et al. 

Elevated temperature, micro-compression transient plasticity tests. on nanocrystalline Palladium-Gold: Probing activation parameters at the lower limit of crystallinity

J. Wehrs; M. J. Deckarm; J. M. Wheeler; X. Maeder; R. Birringer et al. 

Rationalizing the In Vivo Degradation of Metal-on-Metal Artificial Hip Joints Using Tribocorrosion Concepts

S. Cao; A. Igual Munoz; S. Mischler 

Erosion mechanisms during abrasive waterjet machining: Model microstructures and single particle experiments

M. Mieszala; P. L. Torrubia; D. A. Axinte; J. J. Schwiedrzik; Y. Guo et al. 

Tribocorrosion and electrochemical behaviour of nanocrystalline diamond coated Ti based alloys for orthopaedic application

V. Gopal; M. Chandran; M. S. R. Rao; S. Mischler; S. Cao et al. 

Applicability of a recently proposed tribocorrosion model to CoCr alloys with different carbides content

S. Guadalupe; S. Cao; M. Cantoni; W-J. Chitty; C. Falcand et al. 

Assessment of a recent tribocorrosion model for wear of metal-on-metal hip joints: Comparison between model predictions and simulator results

S. Cao; S. Mischler 

Orientation-dependent mechanical behaviour of electrodeposited copper with nanoscale twins

M. Mieszala; G. Guillonneau; M. Hasegawa; R. Raghavan; J. M. Wheeler et al. 

Effect of surface films on tribologically induced metallurgical transformations of steel in oil lubricated contacts

S. Cao; F. Sarasin; M. Cantoni; S. Mischler 

Atomic aluminum content (x) effect on fretting-corrosion of Ti1-xAlxN coatings for orthopedic applications

A. Esguerra-Arce; S. Mischler; S. Moya; C. Amaya; L. Ipaz et al. 

A rational synthesis of hierarchically porous, N-doped carbon from Mg-based MOFs: understanding the link between nitrogen content and oxygen reduction electrocatalysis

D. Eisenberg; W. Stroek; N. J. Geels; S. Tanase; M. Ferbinteanu et al. 

Tribocorrosion in Pressurized High-Temperature Water: A Mass Flow Model Based on the Third-Body Approach

S. Guadalupe; C. Falcand; W. Chitty; S. Mischler 

Adverse tissue reaction to corrosion at the neck-stem junction after modular primary total hip arthroplasty

G. Gkagkalis; P. Mettraux; P. Omoumi; S. Mischler; H. A. Ruediger 

Elevated temperature, strain rate jump microcompression of nanocrystalline nickel

G. Mohanty; J. M. Wheeler; R. Raghavan; J. Wehrs; M. Hasegawa et al. 

Tribocorrosion of passive metals in the mixed lubrication regime: theoretical model and application to metal-on-metal artificial hip joints

S. Cao; S. G. Maldonado; S. Mischler 

Comparison of In Situ Micromechanical Strain-Rate Sensitivity Measurement Techniques

J. Wehrs; G. Mohanty; G. Guillonneau; A. A. Taylor; X. Maeder et al. 

In vivo electrochemical corrosion study of a CoCrMo biomedical alloy in human synovial fluids

A. Igual Munoz; J. Schwiesau; B. M. Jolles; S. Mischler 

Electrochemical Quartz Crystal Microbalance and X-Ray Photoelectron Spectroscopy study of cathodic reactions in Bovine Serum Albumin containing solutions on a Physical Vapour Deposition-CoCrMo biomedical alloy

A. I. Munoz; S. Mischler 

Novel SU-8/Ionic Liquid Composite for Tribological Coatings and MEMS

L. Batooli; S. G. Maldonado; M. Judelewicz; S. Mischler 

Electrochemical Characterization of CoCr Alloy in In-vivo Synovial Fluids

M. A. Igual; B. M. Jolles; S. Mischler 

Adsorption of BSA on Passivated CoCrMo PVD Alloy: An EQCM and XPS Investigation

C. Valero-Vidal; A. Igual-Munoz; C-O. A. Olsson; S. Mischler 

Wear of CoCrMo alloys used in metal-on-metal hip joints: A tribocorrosion appraisal

S. Mischler; A. Igual Munoz 

Tribocorrosion of Pulsed Plasma-Nitrided CoCrMo Implant Alloy

A. Bazzoni; S. Mischler; N. Espallargas 

Mechanical and chemical mechanisms in the tribocorrosion of a Stellite type alloy

S. G. Maldonado; S. Mischler; M. Cantoni; W-J. Chitty; C. Falcand et al. 

In-vivo condition monitoring of metallic implants by electrochemical techniques

N. Diomidis; S. Mischler; E. Meurville 

Passivation of a CoCrMo PVD Alloy with Biomedical Composition under Simulated Physiological Conditions Studied by EQCM and XPS

C. Valero Vidal; A. Igual Munoz; C-O. A. Olsson; S. Mischler 

Electrochemical Simulation of the Current and Potential Response in Sliding Tribocorrosion

N. Papageorgiou; S. Mischler 

Tribo-electrochemical characterization of metallic biomaterials for total joint replacement

N. Diomidis; S. Mischler; N. S. More; M. Roy 

Processing and tribology of thermoplastic polyurethane particulate composite materials

B. Golaz; S. Tétouani; N. Diomidis; V. Michaud; S. Mischler 

Mechanical and electrochemical deterioration mechanisms in the tribocorrosion of Al alloys in NaCl and in NaNO3 solutions

A. C. Vieira; L. A. Rocha; N. Papageorgiou; S. Mischler 

Influence of chelating agents on the tribocorrosion of tungsten in sulphuric acid solution

J. Stojadinovic; D. Bouvet; M. Declercq; S. Mischler 

Dry wear and tribocorrosion mechanisms of pulsed plasma nitrided Ni-Cr alloy

N. Espallargas; S. Mischler 

Wear and frictional mechanisms of copper-based bearing alloys

S. Equey; A. Houriet; S. Mischler 

EBSD, SEM and FIB characterisation of subsurface deformation during tribocorrosion of stainless steel in sulphuric acid

J. Perret; E. Boehm-Courjault; M. Cantoni; S. Mischler; A. Beaudouin et al. 

Third body effects on friction and wear during the fretting of steel contacts

N. Diomidis; S. Mischler 

Electrophoretic deposition of functionalized polystyrene particles for TiO2 multi-scale structured surfaces

S. Radice; H. Dietsch; S. Mischler; J. Michler 

Critical particle concentration in electrophoretic deposition

S. Radice; C. R. Bradbury; J. Michler; S. Mischler 

Tribocorrosion behaviour of overlay welded Ni-Cr 625 alloy in sulphuric and nitric acids: Electrochemical and chemical effects

N. Espallargas; S. Mischler 

Influence of emulsion composition on lubrication capacity and texture perception

M. Bellamy; N. Godinot; S. Mischler; N. Martin; C. Hartmann 

Friction And Lubricant Film Thickness Measurements On Simulated Synovial Fluid

A. Mavraki; P. M. Cann; S. Mischler; S. Boedo; J. F. Booker et al. 

Methods for functionalization of microsized polystyrene beads with titania nanoparticles for cathodic electrophoretic deposition

S. Radice; P. Kern; H. Dietsch; S. Mischler; J. Michler 

Triboelectrochemical techniques and interpretation methods in tribocorrosion: A comparative evaluation

S. Mischler