Publications

Sur cette page, vous trouverez des articles et autres publications de notre laboratoire, classés par année. Si vous souhaitez effectuer une recherche dans la base de données, veuillez utiliser le site d’infoscience de l’EPFL. Vous pouvez également consulter les thèses réalisés au LMM et les conférences données par les membres du LMM dans le menu de gauche.

Articles de journaux

On the slip burst amplitude cutoff in dislocation-rich microcrystals

L. Borasi; A. Mortensen 

Acta Materialia. 2023-12-09. Vol. 264, p. 119582. DOI : 10.1016/j.actamat.2023.119582.

Room-temperature strength of the interfacial bond between silica inclusions and iron

D. Hernandez-Escobar; A. I. Slagter; S. P. Amarillo; A. Mortensen 

Acta Materialia. 2023-11-09. Vol. 263, p. 119502. DOI : 10.1016/j.actamat.2023.119502.

Intermittent tensile deformation of silver microcastings: Influence of the strain rate

L. Borasi; A. Mortensen 

Scripta Materialia. 2023-10-14. Vol. 239, p. 115820. DOI : 10.1016/j.scriptamat.2023.115820.

Phase Transformation-Induced Interfacial Debonding of Silica Inclusions in Iron

D. Hernandez-Escobar; A. I. Slagter; J. Gheysen; A. Mortensen 

Metallurgical And Materials Transactions B-Process Metallurgy And Materials Processing Science. 2023-10-25. Vol. 55, num. 1, p. 1-7. DOI : 10.1007/s11663-023-02939-6.

The effect of size, orientation and temperature on the deformation of microcast silver crystals

L. Borasi; S. Frasca; E. Charbon; A. Mortensen 

Acta Materialia. 2023-03-10. Vol. 249, p. 118817. DOI : 10.1016/j.actamat.2023.118817.

Nanoindentation of embedded particles

A. Slagter; J. Everaerts; A. Mortensen 

Journal Of Materials Research. 2023-02-10. DOI : 10.1557/s43578-023-00920-2.

Liquid metal infiltration of silicon based alloys into porous carbonaceous materials Part-III: Experimental verification of conversion products and infiltration depth by infiltration of Si-Zr alloy into mixed SiC/ graphite preforms

M. Naikade; C. Hain; K. Kastelik; A. Parrilli; T. Graule et al. 

Journal Of The European Ceramic Society. 2023-01-01. Vol. 43, num. 1, p. 47-53. DOI : 10.1016/j.jeurceramsoc.2022.09.036.

On the bulk compressibility of close-packed particles and their composites

M. G. Tarantino; A. Mortensen 

Composites Part A-Applied Science And Manufacturing. 2022-10-01. Vol. 161, p. 107106. DOI : 10.1016/j.compositesa.2022.107106.

Coupling silicon lithography with metal casting

L. Borasi; S. Frasca; K. Nicolet-Dit-Felix; E. Charbon; A. Mortensen 

Applied Materials Today. 2022-12-01. Vol. 29, p. 101647. DOI : 10.1016/j.apmt.2022.101647.

Strong silicon oxide inclusions in iron

A. Slagter; J. Everaerts; L. Deillon; A. Mortensen 

Acta Materialia. 2022. Vol. 242, p. 118437. DOI : 10.1016/j.actamat.2022.118437.

Light-Based Printing of Leachable Salt Molds for Facile Shaping of Complex Structures

N. Kleger; S. Fehlmann; S. S. Lee; C. Denereaz; M. Cihova et al. 

Advanced Materials. 2022-07-05.  p. 2203878. DOI : 10.1002/adma.202203878.

The thermally activated deformation behaviour of single-crystalline microcast aluminium wires

S. Verheyden; L. Deillon; A. Mortensen 

Acta Materialia. 2022-08-01. Vol. 234, p. 118037. DOI : 10.1016/j.actamat.2022.118037.

A method for cleaning flat punch diamond microprobe tips

J. Everaerts; A. Slagter; A. Mortensen 

Micron. 2022-04-01. Vol. 155, p. 103217. DOI : 10.1016/j.micron.2022.103217.

Investment casting of periodic aluminum cellular structures using slurry-cast table salt moulds

F. Gallien; V. Gass; A. Mortensen 

Materials & Design. 2022-03-01. Vol. 215, p. 110488. DOI : 10.1016/j.matdes.2022.110488.

Liquid metal infiltration of silicon based alloys into porous carbonaceous materials. Part I: Modelling of channel filling and reaction phase formation

M. Naikade; A. Ortona; T. Graule; L. Weber 

Journal Of The European Ceramic Society. 2022-05-01. Vol. 42, num. 5, p. 1971-1983. DOI : 10.1016/j.jeurceramsoc.2021.12.068.

Liquid metal infiltration of silicon based alloys into porous carbonaceous materials. Part II: Experimental verification of modelling approaches by infiltration of Si-Zr alloy into idealized microchannels

M. Naikade; C. Hain; K. Kastelik; R. Bronnimann; G. Bianchi et al. 

Journal Of The European Ceramic Society. 2022-05-01. Vol. 42, num. 5, p. 1984-1994. DOI : 10.1016/j.jeurceramsoc.2022.01.004.

Surface energy contributions to the work of infiltration in metal matrix composite processing

J. M. Molina Jorda; G. Schneider; A. Mortensen 

Scripta Materialia. 2021-08-27. Vol. 206, p. 114223. DOI : 10.1016/j.scriptamat.2021.114223.

Thèses

Micromechanics of oxide inclusions in ferrous alloys

A. I. Slagter / A. Mortensen (Dir.)  

Lausanne, EPFL, 2023. 

Bringing casting to microfabrication: processing and deformation of microcastings

L. Borasi / A. Mortensen; Y. Bellouard (Dir.)  

Lausanne, EPFL, 2023. 

Datasets

Nanoindentation hardness and modulus of Al2O3-SiO2-CaO and MnO-SiO2-FeO inclusions in iron

J. A. Setyadji; E. L. Vogt; A. I. Slagter; D. Hernandez Escobar; L. Deillon et al. 

2024.