EDIPO Test Faciliy – User specification
2015
Physical Properties of High-Temperature Superconductors
Wiley, 2015.Strain Management in HTS High Current Cables
IEEE Transactions on Applied Superconductivity. 2015. Vol. 25, num. 3, p. 1-4. DOI : 10.1109/TASC.2014.2360041.Transverse heat transfer coefficient in the dual channel ITER TF CICCs Part II. Analysis of transient temperature responses observed during a heat slug propagation experiment
Cryogenics. 2015. Vol. 65, p. 38-48. DOI : 10.1016/j.cryogenics.2014.11.001.Assessment Studies and Manufacturing Trials for the Conductors of DEMO TF Coils
IEEE Transactions on Applied Superconductivity. 2015. Vol. 25, num. 3, p. 1-5. DOI : 10.1109/TASC.2014.2360561.Applicability of Non-Destructive Examination to Iter TF Joints Nb3Sn
IEEE Transactions on Applied Superconductivity. 2015. Vol. 25, p. 4200505. DOI : 10.1109/TASC.2014.2361407.Results of the test of a pair of 20 kA HTS currents leads
2014. 11th European Conference on Applied Superconductivity (EUCAS), Genoa, ITALY, SEP 15-19, 2013. p. 032056. DOI : 10.1088/1742-6596/507/3/032056.Construction and test of a non-insulated insert coil using coated conductor tape
2014. 11th European Conference on Applied Superconductivity (EUCAS), Genoa, ITALY, SEP 15-19, 2013. p. 032052. DOI : 10.1088/1742-6596/507/3/032052.Operational experience in the use of 18 kA HTS current leads for Edipo
2014. 11th European Conference on Applied Superconductivity (EUCAS), Genoa, ITALY, SEP 15-19, 2013. p. 032008. DOI : 10.1088/1742-6596/507/3/032008.Conductor Performance of TFCN4 and TFCN5 Samples for ITER TF Coils
IEEE Transactions on Applied Superconductivity. 2014. Vol. 25, num. 3, p. 1-5. DOI : 10.1109/TASC.2014.2376931.Superconductivity and fusion energy—the inseparable companions
Superconductor Science and Technology. 2014. Vol. 28, num. 2, p. 024001. DOI : 10.1088/0953-2048/28/2/024001.Progresses and challenges in the development of high-field solenoidal magnets based on RE123 coated conductors
Superconductor Science & Technology. 2014. Vol. 27, num. 10, p. 103001. DOI : 10.1088/0953-2048/27/10/103001.Collective Flux Jumps observed in the Operation of the EDIPO Magnet
IEEE Transactions on Applied Superconductivity. 2014. Vol. 25, num. 3, p. 4701104. DOI : 10.1109/TASC.2014.2374333.Summary of the Test Results of ITER Conductors in SULTAN
2014. 25th Fusion Energy Conference (FEC 2014), Saint Petersburg, Russia, October 13-18, 2014.Pre-conceptual studies and R&D for DEMO superconducting magnets
2014. 11th International Symposium on Fusion Nuclear Technology (ISFNT), Barcelona, SPAIN, SEP 15-20, 2013. p. 1775-1778. DOI : 10.1016/j.fusengdes.2013.12.031.The performance test and analysis of the third and fourth China PF conductor for ITER
Physica C-Superconductivity And Its Applications. 2014. Vol. 499, p. 9-14. DOI : 10.1016/j.physc.2014.02.001.Results of the Test of Industrially Manufactured HTS Current Leads With Novel Design Features
Ieee Transactions On Applied Superconductivity. 2014. Vol. 24, num. 3, p. 4800205. DOI : 10.1109/Tasc.2013.2281121.Design and Strand Tests of a Fusion Cable Composed of Coated Conductor Tapes
Ieee Transactions On Applied Superconductivity. 2014. Vol. 24, num. 3, p. 480704. DOI : 10.1109/Tasc.2013.2281783.Test Results of RF ITER TF Conductors in the SULTAN Test Facility
Ieee Transactions On Applied Superconductivity. 2014. Vol. 24, num. 3, p. 4801905. DOI : 10.1109/Tasc.2013.2289361.Recent Tests of the ITER Conductors and Highlights in Nb3Sn Conductors Behavior
IEEE Transactions on Applied Superconductivity Asc. 2014. Vol. 24, num. 3, p. 4802105. DOI : 10.1109/Tasc.2013.2288796.Impact of Cable Twist Pitch on T-cs-Degradation and AC Loss in Nb3Sn Conductors for ITER Central Solenoids
Ieee Transactions On Applied Superconductivity. 2014. Vol. 24, num. 3, p. 4200705. DOI : 10.1109/Tasc.2013.2284193.Optimization of Heat Treatment of Japanese Nb3Sn Conductors for Toroidal Field Coils in ITER
IEEE Transactions On Applied Superconductivity. 2014. Vol. 24, num. 3, p. 60000605. DOI : 10.1109/Tasc.2013.2286675.Thermal-Hydraulic Analysis of LTS Cables for the DEMO TF Coil
Ieee Transactions On Applied Superconductivity. 2014. Vol. 24, num. 3, p. 4200305. DOI : 10.1109/Tasc.2013.2281625.Manufacturing and Preliminary Performance Expectations of Nb3Sn Based Conductors Allocated for the First ITER TF Coil With CICC From Korea
Ieee Transactions On Applied Superconductivity. 2014. Vol. 24, num. 3, p. 4801605. DOI : 10.1109/Tasc.2013.2287907.From Conception to Commissioning of EDIPO and SULTAN Quench Detection Systems
Ieee Transactions On Applied Superconductivity. 2014. Vol. 24, num. 3, p. 4701705. DOI : 10.1109/Tasc.2013.2292325.Analysis of the CICC Performance Through the Measurement of the Thermal Strain Distribution of the Nb-3 Sn Filaments in the Cable Cross Section
Ieee Transactions On Applied Superconductivity. 2014. Vol. 24, num. 3, p. 48002204. DOI : 10.1109/Tasc.2013.2290617.Commissioning of the Main Coil of the EDIPO Test Facility
Ieee Transactions On Applied Superconductivity. 2014. Vol. 24, num. 3, p. 9500205. DOI : 10.1109/Tasc.2013.2284721.Design of Large Size, Force Flow Superconductors for DEMO TF Coils
Ieee Transactions On Applied Superconductivity. 2014. Vol. 24, num. 3, p. 4201504. DOI : 10.1109/Tasc.2013.2281.059.Quench studies of YBCO insulated and noninsulated pancake coils
2014. p. 4701105. DOI : 10.1109/TASC.2013.2287636.Operational experience in the use of 18 kA HTS current leads
2013. EUCAS 2013, Genova, Italy, September 15-19, 2013.Results of the test of a pair of 20 kA HTS current leads
2013. EUCAS 2013, Genova, Italy, September 15-19, 2013.High current superconductors for DEMO
2013. 27th Symposium on Fusion Technology (SOFT). p. 1564-1568. DOI : 10.1016/j.fusengdes.2012.12.004.Prospects for the use of high-T-c superconductors in fusion magnets and options for their test in SULTAN
2013. 27th Symposium on Fusion Technology (SOFT). p. 1495-1498. DOI : 10.1016/j.fusengdes.2013.01.068.Manufacture of ITER feeder sample conductors
2013. 27th Symposium on Fusion Technology (SOFT). p. 1461-1464. DOI : 10.1016/j.fusengdes.2013.01.008.The performance test and analysis of ITER Main and Correction Busbar conductor
Fusion Engineering And Design. 2013. Vol. 88, num. 11, p. 2802-2809. DOI : 10.1016/j.fusengdes.2013.04.029.Examination of Nb3Sn Conductors for ITER Central Solenoids
Ieee Transactions On Applied Superconductivity. 2013. Vol. 23, num. 3, p. 4801604. DOI : 10.1109/Tasc.2013.2244159.Preliminary Performance Test Results of First CICC From Korea Destined for an ITER TF Magnet
IEEE Transactions on Applied Superconductivity Asc. 2013. Vol. 23, num. 3, p. 4201705. DOI : 10.1109/Tasc.2013.2244639.Irreversible Degradation in Nb3Sn Cable in Conduit Conductors
Lausanne, EPFL, 2013.Effect of transverse load on the critical current of a coated conductor Roebel cable
Superconductor Science & Technology. 2013. Vol. 26, num. 7, p. 074002. DOI : 10.1088/0953-2048/26/7/074002.The relationship between the n-value and applied strain
Superconductor Science & Technology. 2013. Vol. 26, num. 7, p. 075024. DOI : 10.1088/0953-2048/26/7/075024.MgB2 Hollow Wires and Cables Embedded in a Mg Alloy Matrix
IEEE Transactions on Applied Superconductivity. 2013. Vol. 23, num. 3, p. 6200605. DOI : 10.1109/Tasc.2012.2230671.Status of Conductor Qualification for the ITER Central Solenoid
IEEE Transactions on Applied Superconductivity Asc. 2013. Vol. 23, num. 3, p. 6001208. DOI : 10.1109/Tasc.2013.2245391.Fabrication Trials of Round Strands Composed of Coated Conductor Tapes
IEEE Transactions on Applied Superconductivity Asc. 2013. Vol. 23, num. 3, p. 4802104. DOI : 10.1109/Tasc.2013.2239351.Testing of RF 100 m TF Qualification Conductor in the SULTAN Test Facility
Ieee Transactions On Applied Superconductivity. 2013. Vol. 23, num. 3, p. 9500805. DOI : 10.1109/Tasc.2013.2243798.SULTAN test facility: Summary of recent results
Fusion Engineering And Design. 2013. Vol. 88, num. 5, p. 282-285. DOI : 10.1016/j.fusengdes.2013.02.133.Experimental and Analytical Approaches on JT-60SA TF Strand and TF Conductor Quality Control During Qualification and Production Manufacture Stages
IEEE Transactions on Applied Superconductivity Asc. 2013. Vol. 23, num. 3, p. 4200504. DOI : 10.1109/Tasc.2012.2232951.Results of the TFEU6 Sample Tested in SULTAN
Ieee Transactions On Applied Superconductivity. 2013. Vol. 23, num. 3, p. 4200204. DOI : 10.1109/Tasc.2012.2228893.Parametric Study for the Cooling of HTS Current Leads Using a Liquid Nitrogen Bath
Ieee Transactions On Applied Superconductivity. 2013. Vol. 23, num. 3, p. 4800304. DOI : 10.1109/Tasc.2012.2232698.Monitoring of the Thermal Strain Distribution in CICCs During the Cyclic Loading Tests in SULTAN
IEEE Transactions On Applied Superconductivity. 2013. Vol. 23, num. 3, p. 4200404. DOI : 10.1109/Tasc.2012.2235492.Integrated analysis of quench propagation in a system of magnetically coupled superconducting coils
2013. CHATS-AS XI, Geneva, Switzerland, October 12-14, 2011. p. 94-106. DOI : 10.1016/j.cryogenics.2012.10.003.Test Results of ITER Correction Coil Short Samples CCCN1 and CCCN2
Fusion Science and Technology. 2012. Vol. 62, num. 2, p. 311-315. DOI : 10.13182/FST12-A14621.The EDIPO Project: Status and Outlook
2012. 22nd International Conference on Magnet Technology (MT), Marseille, September 12-16, 2011. DOI : 10.1109/Tasc.2011.2174593.Conductor Performance Qualification of TFKO3 Sample for ITER TF Magnet
2012. 22nd International Conference on Magnet Technology (MT)), Marseille, September 12-16, 2011. DOI : 10.1109/Tasc.2011.2178109.Examination of Japanese Mass-Produced Nb3Sn Conductors for ITER Toroidal Field Coils
2012. 22nd International Conference on Magnet Technology (MT), Marseille, September 12-16, 2011. DOI : 10.1109/Tasc.2011.2178990.Manufacture and Acceptance Test of the Full Size ITER PF5 Conductor Sample
2012. 22nd International Conference on Magnet Technology (MT), Marseille, September 12-16, 2011. DOI : 10.1109/Tasc.2011.2175432.Test Results and Investigation of Tcs Degradation in Japanese ITER CS Conductor Samples
2012. 22nd International Conference on Magnet Technology (MT). DOI : 10.1109/Tasc.2011.2178370.Test Results of a 100 kA NbTi CICC
2012. 22nd International Conference on Magnet Technology (MT). p. 4805304. DOI : 10.1109/Tasc.2011.2174597.Operation and Test Results From the SULTAN Test Facility
2012. 22nd International Conference on Magnet Technology (MT). p. 9501704. DOI : 10.1109/Tasc.2012.2191483.Results of the TF conductor performance qualification samples for the ITER project
Superconductor Science & Technology. 2012. Vol. 25, num. 9, p. 095004. DOI : 10.1088/0953-2048/25/9/095004.Conceptual design and analysis of a cryogenic system for a new test facility for high temperature superconductor current leads (HTS CLs)
Przeglad Elektrotechniczny. 2012. Vol. 88, p. 140-143.Development of magnet technologies for HTS insert coils
2012. EUCAS 2011, The Hague, The Netherlands, September 18-23, 2011. p. 1165-1168. DOI : 10.1016/j.phpro.2012.06.195.Design and manufacture of 20 kA HTS current leads for a hybrid magnet system
2012. EUCAS 2011, The Hague, The Netherlands, September 18-23, 2011. p. 927-930. DOI : 10.1016/j.phpro.2012.06.231.Development of HTS current leads for industrial fabrication
2012. MT-22, International Conference on Magnet Technology, Marseille, France, September 11-16, 2011. DOI : 10.1109/Tasc.2011.2178013.Measurement of Tc distribution in NbSn CICC
2012. MEM-11,, Okinawa, Japan, November 2011. p. 054007. DOI : 10.1088/0953-2048/25/5/054007.In situ Tc measurements of cable in conduit conductors via an inductive method
2012. MT-22, International Conference on Magnet Technology, Marseille, France, September 11-16, 2011. DOI : 10.1109/Tasc.2011.2176459.Effect of Thermal Loading on Nb3Sn CICC Performance
2012. MT-22, International Conference on Magnet Technology, Marseille, France, September 11-16, 2011. DOI : 10.1109/Tasc.2011.2178571.Test Results of Three Poloidal Field Superconducting Samples in SULTAN
2012. MT-22, International Conference on Magnet Technology, Marseille, France, September 11-16, 2011. DOI : 10.1109/Tasc.2011.2176704.EDIPO quench detection system: concept and development
2012. MT-22, International Conference on Magnet Technology, Marseille, France, September 11-16, 2011. DOI : 10.1109/Tasc.2011.2178011.Statistical analysis of the current-sharing temperature evolution in Nb3Sn cable-in-conduit-conductors for ITER
2012. MT-22, International Conference on Magnet Technology, Marseille, France, September 11-16, 2011. p. 4802204. DOI : 10.1109/Tasc.2011.2175676.Design of a quench protection system for a coated conductor insert coil
2012. MT-22, International Conference on Magnet Technology, Marseille, France, September 11-16, 2011. p. 4702704. DOI : 10.1109/Tasc.2011.2176455.Parametric study for the cooling of high temperature superconductor (HTS) current leads
2011. CHATS on Applied Superconductivity 2011, Geneva, Switzerland, October 12-14, 2011. p. 31-36. DOI : 10.1016/j.cryogenics.2012.06.014.Transverse heat transfer coefficient in the dual channel ITER TF CICCs Part I: Analysis of steady state temperature profiles resulting from annular heating
Cryogenics. 2011. Vol. 51, p. 598-608. DOI : 10.1016/j.cryogenics.2011.09.003.Test Result of a Full-Size Nb3Sn Conductor Developed for the ITER TF Coils
Ieee Transactions On Applied Superconductivity. 2011. Vol. 21, p. 1982-1986. DOI : 10.1109/TASC.2010.2093488.Status Report of the EDIPO Project
Ieee Transactions On Applied Superconductivity. 2011. Vol. 21, p. 1953-1959. DOI : 10.1109/TASC.2010.2093096.Modified friction factor correlation for CICC’s based on a porous media analogy
Cryogenics. 2011. Vol. 51, p. 541-545. DOI : 10.1016/j.cryogenics.2011.07.003.Test of ITER conductors in SULTAN: an update
2011. SOFT 2010, Porto, Portugal, September 27 – October 1, 2010. p. 1406-1409. DOI : 10.1016/j.fusengdes.2011.02.061.Test results of the 18 kA EDIPO HTS current leads
2011. SOFT 2010, Porto, Portugal, September 27 – October 1, 2010. p. 1414-1417. DOI : 10.1016/j.fusengdes.2011.01.026.Review of design aspects for high current Nb3Sn conductors
2011. Applied Superconductivity Conference, ASC-2010, Washington, DC, USA, August 1-6, 2010. p. 2036-2041. DOI : 10.1109/TASC.2010.2091095.Quench analysis of a high-current forced-flow HTS conductor model for fusion magnets
2011. ASC, Washington, DC, USA, August 1-6, 2010. p. 2445-2448. DOI : 10.1109/TASC.2010.2090329.A parametric AC loss model of the ITER coils for control optimization
Cryogenics. 2010. Vol. 50, num. 3, p. 187-199. DOI : 10.1016/j.cryogenics.2009.06.003.Friction factor correlation for CICC’s based on a porous media analogy
Cryogenics. 2010. Vol. 50, num. 11-12, p. 711-719. DOI : 10.1016/i.cryogenics.2010.06.016.Operation and test results from the SULTAN test facility
2010. Applied Superconductivity Conference, ASC-2010, Washington, DC, USA, August 1-6, 2010.Status report of the EDIPO project
2010. Applied Superconductivity Conference, ASC-2010, Washington, DC, USA, August 1-6, 2010.Test results of two ITER Poloidal Field conductor samples in SULTAN
2010. Applied Superconductivity Conference, ASC-2010, Washington, DC, USA, August 1-6, 2010.Qualification of the U.S.-Made Conductors for ITER Toroidal Field (TF) Magnet System
2010. p. 466-469.Tests and Analyses of Two TF Conductor Prototypes for JT-60SA
2010. 21st International Conference on Magnet Technology (MT-21), Anhui, PEOPLES R CHINA, Oct 18-23, 2009. p. 451-454. DOI : 10.1109/TASC.2010.2041199.Results of thermal Strain and Conductor Elongation upon Heat Treatment for Nb3Sn Cable-in-Conduit Conductors
2010. 21st International Conference on Magnet Technology (MT-21), Anhui, PEOPLES R CHINA, Oct 18-23, 2009. p. 470-473. DOI : 10.1109/TASC.2010.2042584.Successful performances of the EU-AltTF sample, a large size Nb3Sn cable-in-conduit conductor with rectangular geometry
2010. DOI : 10.1088/0953-2048/23/4/045028.Dependence of the ac loss on the aspect ratio in a cable in conduit conductor
2010. DOI : 10.1088/0953-2048/23/4/045011.Test results for a full size Nb3Sn conductor developed for the ITER TF coils
2010. Applied Superconductivity Conference, ASC-2010, Washington, DC, USA, August 1-6, 2010.Superconductors for fusion: achievements, open issues, roadmap to future
2010. ISS2009 – 22nd Int’al Symposium on Superconductivity, Tsukuba, Japan, November 2-4, 2009. p. 1734-1739. DOI : 10.1016/j.physc.2010.05.196.The result of Russian ITER TF conductor sample test in SULTAN
2010. MT-21, International Conference on Magnet Technology, Hefei, China, October 17-23, 2009. p. 462-465. DOI : 10.1109/TASC.2010.2040950.Performance test of TFK02 qualification sample for ITER TF conductor
2010. MT-21, International Conference on Magnet Technology, Hefei, China, October 17-23, 2009. p. 458-461. DOI : 10.1109/TASC.2010.2044157.The JT-60SA toroidal field conductor reference sample: manufacturing and test results
2010. MT-21, International Conference on Magnet Technology, Hefei, China, October 17-23, 2009. p. 442-445. DOI : 10.1109/TASC.2010.2041204.Impact of Sample Preparation Procedure on the Test Results of four US ITER TF Conductors
2010. MT-21, International Conference on Magnet Technology, Hefei, China, October 17-23, 2009. p. 508-511. DOI : 10.1109/TASC.2010.2041761.Design proposal for ITER feeder busbar system
2010. MT-21, International Conference on Magnet Technology, Hefei, China, October 17-23, 2009. p. 407-410. DOI : 10.1109/TASC.2010.2041535.Status Report of the SULTAN Test Facility
2010. MT-21, International Conference on Magnet Technology, Hefei, China, October 17-23, 2009. p. 455-457. DOI : 10.1109/TASC.2010.2042583.Progress in the Integrated Simulation of Thermal-Hydraulic Operation of the ITER Magnet System
2010. MT-21, International Conference on Magnet Technology, Hefei, China, October 17-23, 2009. p. 411-414. DOI : 10.1109/TASC.2010.2043836.Analysis of the EDIPO temperature margin during current ramp-up
2010. MT-21, International Conference on Magnet Technology, Hefei, China, October 17-23, 2009. p. 604-607. DOI : 10.1109/TASC.2010.2040380.Reliability considerations of the ITER Poloidal Field Coils
2010. 21st International Conference on Magnet Technology (MT-21), Anhui, PEOPLES R CHINA, Oct 18-23, 2009. p. 423-426. DOI : 10.1109/TASC.2010.2040262.Design study of a superconducting magnet system for the European Synchrotron Radiation Facility
2010. DOI : 10.1088/0953-2048/23/5/055006.Interstrand resistance and contact resistance distribution on terminations of ITER short samples
2010. 21st International Conference on Magnet Technology (MT-21), Anhui, PEOPLES R CHINA, Oct 18-23, 2009. p. 478-481. DOI : 10.1109/TASC.2010.2042935.Test results of the first US ITER TF conductor in SULTAN
IEEE Transactions on Applied Superconductivity. 2009. Vol. 19, p. 1478. DOI : 10.1109/TASC.2009.2018204.Helium Flow and Temperature Distribution in a Heated Dual-Channel CICC Sample for ITER
2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 1488-1491. DOI : 10.1109/TASC.2009.2018751.Qualification tests for ITER TF conductors in SULTAN
Fusion Engineering and Design. 2009. Vol. 84, p. 205. DOI : 10.1016/j.fusengdes.2008.11.001.EU contribution to the test and analysis of the ITER poloidal field conductor insert and the central solenoid model coil
Superconductor Science and Technology. 2009. Vol. 22, num. 8, p. 085006. DOI : 10.1088/0953-2048/22/8/085006.Inter-strand resistance measurements in the termination of the ITER SULTAN samples
2009. DOI : 10.1088/0953-2048/22/4/045012.Design and manufacture of 17 kA HTS current leads
2009. EUCAS 2009, Dresden, September 13-17, 2009.Pressure drop measurements in Cable-In-Conduit Conductors (CICC’s) for an extended range of Reynolds number
2009. p. 152-155.Pressure drop measurements in Cable-In-Conduit Conductors (CICC) with different layouts
2009. p. 865-870.Helium Flow and Temperatures in a heated sample of a final ITER TF cable- in-conduit conductor
2009. EUCAS 2009, Dresden, September 13-17, 2009.Results of conductor testing in Sultan: a review
2009. WAMSDO, CERN, Geneva, Switzerland, May 19-23, 2008. p. 68-77.Status of the EDIPO project
2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 1552-1556. DOI : 10.1109/TASC.2009.2018483.Test results of Japanese SULTAN sample and conductor procurement in Japan for ITER TF Coils
2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 1470-1473. DOI : 10.1109/TASC.2009.2017696.Test results of the first US ITER TF conductors in SULTAN
2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 1478-1482.Ic measurements on Nb3Sn strands extracted from ITER CICC prototypes
2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 1440-1443. DOI : 10.1109/TASC.2009.2019218.Current sharing and AC loss measurements of cable-in-conduit conductor with Nb3Sn strands for the high field section of the series-connected hybrid outsert coil
2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 2466-2469. DOI : 10.1109/TASC.2009.2018810.AC Loss Measurements on Cable in Conduit Conductor with Random- Changing Magnetic Fields
2009. 25th SOFT, Symposium on Fusion Technology, Rostock, Germany, September 15-19, 2008. p. 569-572. DOI : 10.1016/j.fusengdes.2008.11.040.AC loss measurements in CICC with different aspect ratio
2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 2383-2386. DOI : 10.1109/TASC.2009.2018443.Interstrand resistance and current redistribution in a cable-in-conduit conductor (CICC) termination
2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 1452-1456. DOI : 10.1109/TASC.2009.2019219.Qualification tests and facilities for ITER TF Superconductors
2009. 22nd IAEA Fusion Energy Conf. (FEC) – 50th Anniversary of Controlled Nuclear Fusion Research, Geneva, Switzerland, October 10-18, 2008. DOI : 10.1088/0029-5515/49/6/065034.Test results of a Nb3Sn cable-in-conduit conductor with variable pitch sequence
2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 1448-1451. DOI : 10.1109/TASC.2009.2018762.Methods, accuracy and reliability of ITER conductor tests in SULTAN
2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 1508-1511. DOI : 10.1109/TASC.2009.2018508.Calorimetric method results for current sharing temperature Measurements in ITER Conductor Samples in SULTAN
2009. 25th SOFT, Symposium on Fusion Technology, Rostock, Germany, September 15-19, 2008. p. 423-426. DOI : 10.1016/j.fusengdes.2009.01.060.Validation of SUPERMAGNET with PFI results
2008. CHATS-AS, Applied Superconductivity, Tsukuba, Japan, October 30-November 1, 2008.Pressure drop measurements in Cable-In-Conduit Conductors (CICC) with different layouts
2008. Int Cryogenic Engineering Conf. 22, and Int. Cryogenic Engineering Conf. 22, Seoul, Korea, July 21-25, 2008.Stability analysis of the LHC cables for transient heat depositions
IEEE Transactions on Applied Superconductivity. 2008. Vol. 18, num. 2, p. 1257-1262. DOI : 10.1109/TASC.2008.922543.A porous medium analogy for the helium flow in CICCs
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER. 2008. Vol. 51, num. 9-10, p. 2494-2505. DOI : 10.1016/j.ijheatmasstransfer.2007.07.051.Development of the EFDA dipole high field conductor
2008. 20th International Conference on Magnet Technology, Philadelphia, PA, USA, August 27-31, 2007. p. 544-547. DOI : 10.1109/TASC.2008.921329.Manufacturing of the ITER TF full size prototype conductor
2008. 20th International Conference on Magnet Technology, Philadelphia, PA, USA, August 27-31, 2007. p. 1105-1108.Performance of Japanese Nb3Sn conductors for ITER toroidal field coils
2008. 20th International Conference on Magnet Technology, Philadelphia, PA, USA, August 27-31, 2007. p. 471-474. DOI : 10.1109/TASC.2008.921866.Development of a new RF produced internal tin ITER TF conductor sample for testing in SULTAN facility
2008. 20th International Conference on Magnet Technology, Philadelphia, PA, USA, August 27-31, 2007. p. 1076-1079. DOI : 10.1109/TASC.2008.921237.Design and procurement of the European dipole (EDIPO) superconducting magnet
2008. 20th International Conference on Magnet Technology, Philadelphia, PA, USA, August 27-31, 2007. p. 499-504. DOI : 10.1109/TASC.2008.921356.Winding configurations studies for the EFDA dipole test facility EDIPO
2008. 20th International Conference on Magnet Technology, Philadelphia, PA, USA, August 27-31, 2007. p. 196-199.Development and Sultan test result of ITER conductor samples of Korea
2008. 20th International Conference on Magnet Technology, Philadelphia, PA, USA, August 27-31, 2007. p. 1084-1087. DOI : 10.1109/TASC.2008.921256.Inter-strand resistance in the termination of ITER conductors
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY. 2008. Vol. 18, num. 2, p. 1101-1104. DOI : 10.1109/TASC.2008.921294.Preparatory work to host the EDIPO test facility at CRPP
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY. 2008. Vol. 18, num. 2, p. 204-207. DOI : 10.1109/TASC.2008.922280.Test results of two European ITER TF conductor samples in SULTAN
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY. 2008. Vol. 18, num. 2, p. 1088-1091. DOI : 10.1109/TASC.2008.922268.Results of a new generation of ITER TF conductor samples in SULTAN
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY. 2008. Vol. 18, num. 2, p. 459-462. DOI : 10.1109/TASC.2008.922266.The THELMA model of the joint resistance distribution tests with JORDI
EEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY. 2008. Vol. 18, num. 2, p. 1092-1096. DOI : 10.1109/TASC.2008.920544.Pressure drop of cable-in-conduit conductors with different void fraction
2008. Joint Cryogenic Engineering Conference/International Cryogenic Materials Conference, Chattanooga, TN, USA, July 16-20, 2007. p. 1317-1324. DOI : 10.1063/1.2908489.Comparison of the performances of the CS model coil and the good joint SULTAN sample
Supercond. Sci. Technol.. 2008. Vol. 21, p. 054001, 6pp. DOI : 10.1088/0953-2048/21/5/054001.Static and transient electromagnetic features of the EFDA dipole
IEEE Transactions on Applied Superconductivity. 2008. Vol. 18, p. 188-191. DOI : 10.1109/TASC.2008.920676.Field and temperature dependence of critical currents in industrially manufactured high-Tc wires and tapes
Journal of Physics: Conference Series. 2008. Vol. 97, p. 012208, 1-6. DOI : 10.1088/1742-6596/97/1/012208.Influence of cable layout on the performance of ITER-like Nb3Sn conductor
Journal of Physics: Conference Series. 2008. Vol. 97, p. 012027, 1-6. DOI : 10.1088/1742-6596/97/1/012027.Development of a react and wind conductor for the ITER toroidal field coils
IEEE Transactions on Applied Superconductivity. 2008. Vol. 18, p. 467-470. DOI : 10.1109/TASC.2008.922260.Solder-filling of a CIC cable for the EFDA dipole magnet
Advances in Cryogenic Engineering Materials, ICMC. 2008. Vol. 54, p. 151-158.Analysis of the transverse heat transfer coefficients in a dual channel ITER-type cable-in-conduit conductor
2007. CHATS on Applied Superconductivity Workshop 2006, Berkeley, CA, Sep 05-07, 2006. p. 563-576. DOI : 10.1016/j.cryogenics.2007.08.008.Simulation of the flow-reversal effect in dual-channel CICC for ITER
2007. CHATS on Applied Superconductivity Workshop 2006, Berkeley, CA, Sep 05-07, 2006. p. 553-562. DOI : 10.1016/j.cryogenics.2007.08.005.Modeling of the effects of current non-uniformity in SULTAN samples using the THELMA code
2007. MT-20, International Conference on Magnet Technology, Philadelphia, Penn, USA, 27 August 2007.Static and transient electromagentic features of the EFDA dipole
2007. MT-20, International Conference on Magnet Technology, Philadelphia, Penn, USA, 27 August 2007.Stability analysis of the LCH cables for transient heat depositions
2007. MT-20, International Conference on Magnet Technology, Philadelphia, Penn, USA, 27 August 2007.Retest of the TFAS1 sample with solder filled extremities
2007. MT-20, International Conference on Magnet Technology, Philadelphia, Penn, USA, 27 August 2007. p. 1080-1083. DOI : 10.1109/TASC.2008.922264.Quench analysis of the EDIPO high field superconducting dipole magnet
2007. MT-20, International Conference on Magnet Technology, Philadelphia, Penn, USA, 27 August 2007.Pressure drop of cable-in-conduit conductors with different void fraction
2007. CEC-ICMC, Cryogenic Engineering Conf and International Cryogenic Materials Conference, Chattanooga, Te, USA , 16 July 2007.review of material properties, past experiences, procedures, issues and results for a possible solder filled cable as Plan B conductor for the EFDA dipole magnet (Draft Vs 1)
2007
Computations of AC loss in the ITER magnets, during fast field transients
Ieee Transactions on Applied Superconductivity. 2007. Vol. 17, num. 2, p. 2438-2441. DOI : 10.1109/TASC.2007.899837.Test results of two ITER TF conductor short samples using high current density Nb3Sn strands
Ieee Transactions on Applied Superconductivity. 2007. Vol. 17, num. 2, p. 1370-1373. DOI : 10.1109/TASC.2007.898504.Test results of a large size, forced flow Nb3Sn conductor, based on a design alternative to the cable-in-conduit
Ieee Transactions on Applied Superconductivity. 2007. Vol. 17, num. 2, p. 1473-1476. DOI : 10.1109/TASC.2007.898502.Results of contact resistance distribution in NbTi and Nb3SnITER conductor termination
Ieee Transactions on Applied Superconductivity. 2007. Vol. 17, num. 2, p. 1378-1381. DOI : 10.1109/TASC.2007.898505.Assessment of the effect of current non-uniformity on the ITER Nb3Sn good joint short sample DC performance
Ieee Transactions on Applied Superconductivity. 2007. Vol. 17, num. 2, p. 1382-1385. DOI : 10.1109/TASC.2007.899039.Design of high-temperature superconductor current leads for ITER
Fusion Eng. and Design. 2007. Vol. 82, p. 1385-1390. DOI : 10.1016/j.fusengdes.2007.01.004.Analysis of DC properties and current distribution in TFAS ITER conductor samples using high J(C) Nb3Sn advanced strands
Ieee Transactions on Applied Superconductivity. 2007. Vol. 17, num. 2, p. 1374-1377. DOI : 10.1109/TASC.2007.899689.Predictive analysis of the ITER Poloidal Field Conductor Insert (PFCI) test program
Ieee Transactions on Applied Superconductivity. 2007. Vol. 17, num. 2, p. 1353-1357. DOI : 10.1109/TASC.2007.899046.High-Temperature Superconductors
Springer Handbook of Electronic and Photonic Materials; Springer US, 2006. p. 1193-1218.New results and remaining issues in superconducting magnets for ITER and associated R&D in Europe
2006. 21th IAEA Fusion Energy Conference, Chengdu, China, 16 October 2006.Test results from the full size prototype test of W7-X joint
2006. SOFT 2006, 24th Symposium on Fusion Technology, Warsaw, Poland, 11 September 2006.Design, manufacture and first results of a novel, large size, Nb3Sn force flow conductor
2006. ICMC 2006. p. 123.Assessment of the effect of current non-uniformity on the Nb3Sn good joint short sample DC performance
2006. ASC 2006.Analysis of critical electrical properties and current distribution of the first two full size conductor samples using Nb3Sn advanced strands developed for ITER
2006. ASC 2006.Comparison of the dc performance of various Nb3Sn strands used in cable-in-conduit for fusion
2006. ICMC 2006. p. 145.Analysis of the transverse heat transfer coefficients in a dual channel ITER-type cable-in-conduit conductor
2006. CHATS-AS 2006.Test results of contact resistance distribution in NbTi and Nb3Sn ITER conductor termination
2006. ASC 2006.The results of two ITER TF conductor short samples using high current density Nb3Sn strands
2006. ASC 2006, Seattle, USA, August 2006. p. 1473.Simulation of the thermosyphon effect in dual channel CICC for ITER
2006. CHATS-AS 2006.Final report on “”Tests of advanced Nb3Sn Strands”, EFDA Reference: ASTEST Contract 03-1121, Deliverable 4.3
2006
AC losses computations for ITER magnets (EFDA ref. TW5-TPO-ACLOS/Contract No. 05-1307, Deliverable No. 2 and 3)
2006
Analysis of the transverse heat transfer coefficients in a dual channel ITER-type cable-in-conduit conductor
2006
Results of contact resistance distribution in ITER size conductor termination
Ieee Transactions on Applied Superconductivity. 2006. Vol. 16, num. 2, p. 779-782. DOI : 10.1109/TASC.2006.873252.Analysis of transverse heat transfer coefficient in CICC’s with central cooling channel
Cryogenics. 2006. Vol. 46, num. 7-8, p. 597-605. DOI : 10.1016/j.cryogenics.2006.02.004.30 years of conductors for fusion: A summary and perspectives
2006. 19th International Conference on Magnet Technology, Genova, Italy, 18 September 2005. p. 839-844. DOI : 10.1109/TASC.2006.873342.Transverse load degradation in Nb3Sn cable-in-conduit conductors with different cable pattern
Advances in cryogenic Engineering. 2006. Vol. 824, p. 558-565.Test results of a small size CICC with advanced Nb3Sn strands
Ieee Transactions on Applied Superconductivity. 2006. Vol. 16, num. 2, p. 894-897. DOI : 10.1109/TASC.2006.873320.Results of Buoyancy-gravity Effects in ITER Cable-in- Conduit Conductor with Dual Channel
2006. Cryogenic Engineering Conference – CEC, Keystone, Colorado (USA), 29 August-2 September 2005. p. 1749-1756. DOI : 10.1063/1.2202603.A critical review of coupling loss results for cable-in-conduit conductors
Ieee Transactions on Applied Superconductivity. 2006. Vol. 16, num. 2, p. 827-830. DOI : 10.1109/TASC.2006.871276.70 kA high temperature superconductor current lead operation at 80 K
Ieee Transactions on Applied Superconductivity. 2006. Vol. 16, num. 2, p. 823-826. DOI : 10.1109/TASC.2006.871275.Conceptual design of the 12.5 T superconducting EFDA dipole
Ieee Transactions on Applied Superconductivity. 2006. Vol. 16, num. 2, p. 1312-1315. DOI : 10.1109/TASC.2005.864285.Design and optimization of the 12.5 T EFDA dipole magnet
Cryogenics. 2006. Vol. 46, num. 7-8, p. 494-506. DOI : 10.1016/j.cryogenics.2006.01.011.Conceptual design of a high temperature superconductor current feeder system for ITER
Journal of Physics: Conference Series. 2006. Vol. 43, p. 1023-1026. DOI : 10.1088/1742-6596/43/1/250.Comparison of the DC performance of full- and sub-size NbTi cable-in-conduit conductors
Ieee Transactions on Applied Superconductivity. 2006. Vol. 16, num. 2, p. 819-822. DOI : 10.1109/TASC.2006.871274.Implications of NbTi short-sample test results and analysis for the ITER poloidal field conductor insert (PFCI)
Ieee Transactions on Applied Superconductivity. 2006. Vol. 16, num. 2, p. 886-889. DOI : 10.1109/TASC.2006.873318.A critical assessment of pressure drop design criteria for the ITER magnet conductors
2006. Cryogenic Engineering Conference – CEC, Keystone, Colorado (USA), 29 August-2 September 2005. p. 1765-1772. DOI : 10.1063/1.2202605.High temperature superconductor current leads proposal for ITER
2005. SOFE 2005 : 21st IEEE/NPSS Symposium on Fusion Engineering, Knoxville, TN USA, 26 September 2005.Implications of NbTi short-sample test results and analysis for the ITER poloidal field conductor insert
2005. 19th International Conference on Magnet Technology, Genova, Italy, 18 September 2005.Conceptual design of the 12.5T superconducting EFDA dipole
2005. 19th International Conference on Magnet Technology, Genova, Italy, 18 September 2005.A critical review of coupling current losses for cable-in-conduct conductors
2005. 19th International Conference on Magnet Technology, Genova, Italy, 18 September 2005.Results of contact resistance distribution in ETER conductor termination
2005. 19th International Conference on Magnet Technology, Genova, Italy, 18 September 2005.A critical assessment of pressure drop design criteria for the ITER conductors
2005. CEC/ICMC Cryogenic Engineering/ Int. Cryogenic Materials Conference, Keystone, CO, USA, 29 August 2005.Results of thermo-siphon occurence in ITER cable-in-conduct conductor with dual channel
2005. CEC/ICMC Cryogenic Engineering/ Int. Cryogenic Materials Conference, Keystone, CO, USA, 29 August 2005.Report on the conceptual design of external HTS bus bars – EFDA reference TW4-TMSF-HTSCOM, Deliverable 2
2005
Test results of the ITER PF insert conductor short sample in SULTAN
Ieee Transactions on Applied Superconductivity. 2005. Vol. 15, num. 2, p. 1351-1354. DOI : 10.1109/TASC.2005.849084.Anomalies on V-I characteristic of NbTi cable-in-conduit conductors
Fusion Engineering and Design. 2005. Vol. 75-9, p. 111-115. DOI : 10.1016/j.fusengdes.2005.06.091.DC performances of ITER NbTi conductors: Models vs. measurements
Ieee Transactions on Applied Superconductivity. 2005. Vol. 15, num. 2, p. 1355-1358. DOI : 10.1109/TASC.2005.849086.High temperature superconductors for the ITER magnet system and beyond
Fusion Engineering and Design. 2005. Vol. 75-9, p. 105-109. DOI : 10.1016/j.fusengdes.2005.06.198.DC and transient current distribution analysis from self-field measurements on ITER PFIS conductor
Fusion Engineering and Design. 2005. Vol. 75-9, p. 11-15. DOI : 10.1016/j.fusengdes.2005.06.075.Experimental results of a 70 kA high temperature superconductor current lead demonstrator for the ITER magnet system
Ieee Transactions on Applied Superconductivity. 2005. Vol. 15, num. 2, p. 1496-1499. DOI : 10.1109/TASC.2005.849145.Design and manufacture of a full size joint sample (FSJS) for the qualification of the poloidal field (PF) Insert coil
Ieee Transactions on Applied Superconductivity. 2005. Vol. 15, num. 2, p. 1379-1382. DOI : 10.1109/TASC.2005.849095.Effect of cyclic loading and conductor layout on contact resistance of full-size ITER PFCI conductors
Ieee Transactions on Applied Superconductivity. 2005. Vol. 15, num. 2, p. 1359-1362. DOI : 10.1109/TASC.2005.849088.Reconstruction of current unbalance in full-size ITER NbTiCICC by self-field measurements
Ieee Transactions on Applied Superconductivity. 2005. Vol. 15, num. 2, p. 1391-1394. DOI : 10.1109/TASC.2005.849098.Pressure drop of the ITER PFCI cable-in-conduit conductor
Ieee Transactions on Applied Superconductivity. 2005. Vol. 15, num. 2, p. 1383-1386. DOI : 10.1109/TASC.2005.849096.Effect of conduit material on CiCC performance under high cycling loads
Ieee Transactions on Applied Superconductivity. 2005. Vol. 15, num. 2, p. 1367-1370. DOI : 10.1109/TASC.2005.849091.A low cost joint for the ITER PF coils, design and test results
Fusion Engineering and Design. 2005. Vol. 75-9, p. 259-263. DOI : 10.1016/j.fusengdes.2005.06.092.The ITER toroidal field model coil project
Fusion Engineering and Design. 2005. Vol. 73, num. 2-4, p. 189-327. DOI : 10.1016/j.fusengdes.2005.07.002.Analyses and implications of V-I characteristic of PF insert conductor sample
Fusion Engineering and Design. 2005. Vol. 75-9, p. 229-233. DOI : 10.1016/j.fusengdes.2005.06.158.DC performance, AC loss and transient field stability of five medium size NbTi cable-in-conduit conductors with parametric variations
Cryogenics. 2005. Vol. 45, num. 12, p. 755-779. DOI : 10.1016/j.cryogenics.2005.10.002.Use of high temperature superconductors for future fusion magnet system
2004. IAEA Fusion Energy Conference, Vilamoura, Portugal, 2004.JORDI, a test facility for measurement of contact resistance distribution in full-size conductor terminations
Ieee Transactions on Applied Superconductivity. 2004. Vol. 14, num. 2, p. 1460-1463. DOI : 10.1109/TASC.2004.830653.The index n of the voltage-current curve, in the characterization and specification of technical superconductors
Physica C-Superconductivity and Its Applications. 2004. Vol. 401, num. 1-4, p. 7-14. DOI : 10.1016/j.physc.2003.09.005.Test results on the first 50 kA NbTi full size sample for the International Thermonuclear Experimental Reactor
Superconductor Science & Technology. 2004. Vol. 17, num. 5, p. S155-S160. DOI : 10.1088/0953-2048/17/5/013.The voltage-current relations for MgB2 obtained by reactive liquid infiltration
Physica C-Superconductivity and Its Applications. 2004. Vol. 401, num. 1-4, p. 310-315. DOI : 10.1016/j.physc.2003.09.061.Design and fabrication of a 70 kA current lead using Ag/Au stabilized Bi-2223 tapes as a demonstrator for the ITER TF-coil system
IEEE Transactions on Applied Superconductivity. 2004. Vol. 14 (2004), num. 2, p. 1774-1777. DOI : 10.1109/TASC.2004.831075.Analysis and interpretation of Tcs tests of the ITER Toroidal Field Conductor Insert
Ieee Transactions on Applied Superconductivity. 2004. Vol. 14, num. 2, p. 1523-1526. DOI : 10.1109/TASC.2004.830685.Ic(B,T,strain) characterization of a Nb3Sn internal tin strand with enhanced specifications for use in fusion conductors
Advances in Cryogenic Engineering. 2004. Vol. 50B, p. 458-465.An alternative CICC design aimed at understanding critical performance issues in Nb3Sn conductors for ITER
Ieee Transactions on Applied Superconductivity. 2004. Vol. 14, num. 2, p. 1527-1530. DOI : 10.1109/TASC.2004.830686.Impact of impressed current unbalance on n-index
Ieee Transactions on Applied Superconductivity. 2004. Vol. 14, num. 2, p. 1495-1498. DOI : 10.1109/TASC.2004.830667.Sudden take-off in large NbTi conductors: not a stability issue
Advances in cryogenic Engineering. 2004. p. 820-827.DC performance of subsize NbTi cable-in-conduit conductors
IEEE Transactions on Applied Superconductivity. 2004. Vol. 14 (2004), num. 2, p. 1499-1502. DOI : 10.1109/TASC.2004.830669.Self-field effects in NbTi subsize cable-in-conduit conductors
Physica C-Superconductivity and Its Applications. 2004. Vol. 401, num. 1-4, p. 113-117. DOI : 10.1016/j.physc.2003.09.020.Effect of current distribution on the voltage-temperature characteristics: study of the NbTiPF-FSJS sample for ITER
Physica C-Superconductivity and Its Applications. 2004. Vol. 401, num. 1-4, p. 99-102. DOI : 10.1016/j.physc.2003.09.017.Analysis of thermal-hydraulic effects in the testing of the ITER poloidal field full size joint sample
Advances in Cryogenic Engineering. 2004. Vol. 49A, p. 544-551.First operational results of the 3rd harmonic superconducting cavities in SLS and ELETTRA
2003. 2003 Particle Accelerator Conference.Test results for Nb3Sn internal Sn strands for fusion conductors
2003. Cryogenic Engineering Conference.The index n of the current-voltage curve, in the characterization and specificatin of technical superconductors
2003.Analysis of current redistribution in a CICC under transient heat pulses
2003. Cryogenic Engineering Conference.Jordi, test facility for measurement of contact resistance in full-size conductor terminations
2003. MT-18 Conference.Final report on the analysis and interpretation of Tcs tests of the ITER toroidal field conductor insert (Task GB8-M12, deliverable #7)
2003
A simple model for the prediction of quench point in cable-in-conduit conductors
Cryogenics. 2003. Vol. 43, num. 3-5, p. 225-232. DOI : 10.1016/S0011-2275(03)00039-0.Parametric studies of subsize NbTi cable-in-conduit superconductors for ITER-FEAT
IEEE Transactions on Applied Superconductivity. 2003. Vol. 13 (2003), num. 2, p. 1456-1459. DOI : 10.1109/TASC.2003.812738.The voltage/current characteristic (n index) of the cable-in-conduit conductors for fusion
IEEE Transactions on Applied Superconductivity. 2003. Vol. 13, num. 2, p. 1452-1455. DOI : 10.1109/TASC.2003.812737.Recent results from R&D on superconductors at CRPP
Nuclear Fusion. 2003. Vol. 43, num. 8, p. 660-664. DOI : 10.1088/0029-5515/43/8/303.High performance new MgB2 superconducting hollow wires
Superconductor Science & Technology. 2003. Vol. 16, num. 2, p. 285-291. DOI : 10.1088/0953-2048/16/2/328.Self field measurements by hall sensors on the SeCRETS short sample CICC’s subjected to cyclic load
Ieee Transactions on Applied Superconductivity. 2003. Vol. 13, num. 2, p. 1752-1755. DOI : 10.1109/TASC.2003.812880.Quench simulation in superconducting cables using optimized DRP scheme
Ieee Transactions on Applied Superconductivity. 2003. Vol. 13, num. 2, p. 1692-1695. DOI : 10.1109/TASC.2003.812869.Analysis of the measurement of the current sharing temperature in the ITER TF model coil
Fusion Engineering and Design. 2003. Vol. 66-8, p. 1001-1005. DOI : 10.1016/S0920-3796(03)00241-2.Overview of JET results
Nuclear Fusion. 2003. Vol. 43, num. 12, p. 1540-1554. DOI : 10.1088/0029-5515/43/12/002.Test results and analyses of conductor short samples for HT-7U
Cryogenics. 2003. Vol. 43, num. 3-5, p. 165-171. DOI : 10.1016/S0011-2275(03)00033-X.DC behaviour of NbTi cable-in-conduit conductors for ITER-FEAT
Fusion Engineering and Design. 2003. Vol. 66-8, p. 1091-1095. DOI : 10.1016/S0920-3796(03)00229-1.Test results and preliminary analysis of HT-7U short samples
2002. CHATS-2002.Cryogenic system for the SLS third harmonic RF cavity
2002. EPAC 2002.Self field measurements fy Hall sensors on the SeCRETS short sample CICC_s subjected to cyclic load
2002. ASC-2002.Super 3HC cryomodule general layout and first tests
2002. EPAC 2002.Learning about hydraulics and stability through an AC loss test
2002. CHATS-2002.Analysis of current redistribution in a cable-in-conduit
2002. CHATS-2002.A simple model for the prediction of quench point in cable-in-conduit conductors
2002. CHATS-2002.The cryogenic system for the third harmonic superconductivity cavity at SLS and Electra
2002. 19th Int. Cryogenic Engineering Conference and Industrial Exhibition (ICEC-19).Thermodynamic optimisation of 70kA bimary current lead
2002
Plasma Current, Position and Shape Control, Contract FU05-CT2001-00018 (EFDA/00-551)
2002
Application of the code THEA to the CONDOPT experiment in SULTAN
Ieee Transactions on Applied Superconductivity. 2002. Vol. 12, num. 1, p. 1528-1532. DOI : 10.1109/TASC.2002.1018693.Coupling currents loss in Nb3Sn cable-in-conduit conductors
Ieee Transactions on Applied Superconductivity. 2002. Vol. 12, num. 1, p. 524-527. DOI : 10.1109/TASC.2002.1018458.Upgrade of operating range for SULTAN test facility
Ieee Transactions on Applied Superconductivity. 2002. Vol. 12, num. 1, p. 520-523. DOI : 10.1109/TASC.2002.1018457.Optimal magnetic probes location for current reconstruction in multistrands superconducting cables
Ieee Transactions on Magnetics. 2002. Vol. 38, num. 2, p. 1057-1060. DOI : 10.1109/20.996271.Transient stability results for Nb3Sn cable-in-conduit conductors
Ieee Transactions on Applied Superconductivity. 2002. Vol. 12, num. 1, p. 512-515. DOI : 10.1109/TASC.2002.1018455.Performance evolution of Nb3Sn cable-in-conduit conductors under cyclic load
Ieee Transactions on Applied Superconductivity. 2002. Vol. 12, num. 1, p. 516-519. DOI : 10.1109/TASC.2002.1018456.Test results of a 10 kA current lead using Ag/Au cladded Bi-2212 tubes
Ieee Transactions on Applied Superconductivity. 2002. Vol. 12, num. 1, p. 1281-1284. DOI : 10.1109/TASC.2002.1018636.Development of high temperature superconductor current leads for 70 kA
Ieee Transactions on Applied Superconductivity. 2002. Vol. 12, num. 1, p. 1285-1288. DOI : 10.1109/TASC.2002.1018637.Self field measurements by Hall sensors on the SeCRETS long sample CICCs in SULTAN
Ieee Transactions on Applied Superconductivity. 2002. Vol. 12, num. 1, p. 1667-1671. DOI : 10.1109/TASC.2002.1018727.Critical current test results of 13 T-46 kA Nb3Al cable-in-conduit conductor
Cryogenics. 2002. Vol. 42, num. 11, p. 675-690. DOI : 10.1016/S0011-2275(02)00128-5.Transient stability analysis of the SeCRETS experiment in SULTAN
Ieee Transactions on Applied Superconductivity. 2002. Vol. 12, num. 1, p. 1524-1527. DOI : 10.1109/TASC.2002.1018692.High-Temperature Superconductors: A New Class of Materials for Fusion Magnets
2001. 2001 Swiss Workshop on Materials with Novel Electronic Properties.Performance Results of Nb3Sn Cable-in-Conduit Conductors under cyclic Load
2001. MT 17.The effect of the feedback controller on superconducting tokamak AC losses
2001
Segregated Copper Ratio Experiment on Transient Stability (SeCRETS) – EU Task M29 / ITER Task N11TT03
2001
Superconductivity: Hysteresis and Coupling Losses
Engineering Superconductivity; Wiley-Interscience, 2001. p. 138-152.Forced Flow Conductor Manufacturing
Engineering Superconductivity; Wiley-Interscience, 2001. p. 218-240.Self-field effects in large superconducting cables for ITER
Fusion Engineering and Design. 2001. Vol. 58-9, p. 7-11. DOI : 10.1016/S0920-3796(01)00466-5.Superconductors and joints, tests and trends for future development
Fusion Engineering and Design. 2001. Vol. 56-7, p. 125-134. DOI : 10.1016/S0920-3796(01)00244-7.Pressure drop and helium inlet in ITER CS1 conductor
Fusion Engineering and Design. 2001. Vol. 58-9, p. 211-215. DOI : 10.1016/S0920-3796(01)00435-5.Contact resistance distribution at the termination of cable-in-conduit conductors
Ieee Transactions on Applied Superconductivity. 2001. Vol. 11, num. 1, p. 1893-1895. DOI : 10.1109/77.920219.Test results of SeCRETS, a stability experiment about segregated copper in CICC
Ieee Transactions on Applied Superconductivity. 2001. Vol. 11, num. 1, p. 2018-2021. DOI : 10.1109/77.920250.Test program preparations of the ITER toroidal field model coil (TFMC)
Fusion Engineering and Design. 2001. Vol. 58-9, p. 147-151. DOI : 10.1016/S0920-3796(01)00570-1.Facility status and results on ITER full-size conductor tests in SULTAN
Ieee Transactions on Applied Superconductivity. 2001. Vol. 11, num. 1, p. 2022-2025. DOI : 10.1109/77.920251.Development program of a 60 kA high temperature superconductor current lead for the ITER toroidal field coils
Fusion Engineering and Design. 2001. Vol. 58-9, p. 105-109. DOI : 10.1016/S0920-3796(01)00354-4.Development of a 20 kA high temperature superconductor current lead
Cryogenics. 2001. Vol. 41, num. 8, p. 539-547. DOI : 10.1016/S0011-2275(01)00101-1.Evaluation of critical current performance of 13 T-46 kA steel jacketed Nb3Al conductor
Fusion Engineering and Design. 2001. Vol. 58-9, p. 1-5. DOI : 10.1016/S0920-3796(01)00465-3.High current applications of high-temperature superconductors, Invited paper
2000. Société Suisse de Physique, Montreux, Printemps 2000.High current conductors for superconducting fusion magnets
2000. Société Suisse de Physique, Montreux, Printemps 2000.Progress of the ITER cental solenoid model coil program
2000. 18th IAEA Fusion Energy Conference.The SUPER-3HC project: an idle superconducting harmonic cavity for bunch length manipulation
2000.Predictive quench initiation analysis of the ITER TF model coil
2000. ICEC-18. p. 173-178.The technical issues associated with the control of steady-state tokamaks
2000. 2nd IAEA Technical Committee Meeting on Steady-State Operation of Magnetic Fusion Devices – Plasma Control and Plasma Facing Components.Superconductors, Forces flow conductor manufacture
Wiley Encyclopedia of Electrical and Electronic Engineering, Suppl. 1; Wiley & Sons, 2000. p. 643-665.Hysteresis and coupling losses in superconductors
Wiley Encyclopedia of Electrical and Electronic Engineering, Suppl. 1; Wiley & Sons, 2000. p. 233-248.Design, construction and operation of a neon refrigeration system for a HTS power transmission prototype cable
Advances in Cryogenic Engineering. 2000. Vol. 45, p. 1419-1426. DOI : 10.1007/978-1-4615-4215-5_59.Correlation between quench pressure and normal zone voltage observed in the QUELL experiment
Cryogenics. 2000. Vol. 40, num. 8-10, p. 549-553. DOI : 10.1016/S0011-2275(01)00011-X.Two-channel analysis of QUELL experimental results
Ieee Transactions on Applied Superconductivity. 2000. Vol. 10, num. 1, p. 1106-1109. DOI : 10.1109/77.828426.Stability under transverse field pulse of the Nb3Sn ITER cable-in-conduit conductor
Ieee Transactions on Applied Superconductivity. 2000. Vol. 10, num. 1, p. 1062-1065. DOI : 10.1109/77.828415.Manufacture and performance results of an improved joint for the ITER conductors
Advances in Cryogenic Engineering. 2000. Vol. 45, p. 737-744.Test results for the high field conductor of the ITER central solenoid model coil
Advances in Cryogenic Engineering. 2000. Vol. 45, p. 729-736.Characterization tests of the Nb3Sn cable-in-conduit conductors for Se.CRETS
Ieee Transactions on Applied Superconductivity. 2000. Vol. 10, num. 1, p. 1086-1089. DOI : 10.1109/77.828421.Se.CRETTS : A stability experiment on the role of segregated copper in Nb3Sn cable-in-conduit conductors
Ieee Transactions on Applied Superconductivity. 2000. Vol. 10, num. 1, p. 1082-1085. DOI : 10.1109/77.828420.Test results and analysis of two European full-size conductor samples for ITER
Ieee Transactions on Applied Superconductivity. 2000. Vol. 10, num. 1, p. 1058-1061. DOI : 10.1109/77.828414.Test results of a 10 kA current lead using Ag/Au stabilized Bi-2223 tapes
Ieee Transactions on Applied Superconductivity. 2000. Vol. 10, num. 1, p. 1470-1473. DOI : 10.1109/77.828518.Technical issues associated with the control of steady state tokamaks
Nuclear Fusion. 2000. Vol. 40, num. 6, p. 1167-1181. DOI : 10.1088/0029-5515/40/6/314.Proposal for a database for the validation of simulations in superconducting cables
Cryogenics. 2000. Vol. 40, num. 8-10, p. 677-678. DOI : 10.1016/S0011-2275(01)00025-X.Heat front propagation and quench initiation analysis of the ITER toroidal field model coil
Cryogenics. 2000. Vol. 40, num. 8-10, p. 501-510. DOI : 10.1016/S0011-2275(01)00006-6.Manufacture and testing of a neon gas-cooled HTS prototype cable for power transmission
1999. EUCAS’99. p. 1119-1122.NbTi conductor with ITER CSMC geometry
1999. Workshop on Short Sample Conductor Test Results.Technical issues associated with the control of steady-state tokamaks
1999
Stability and quench of dual cooling channel cable-in-conduct superconductors
1999