Publications

EDIPO Test Faciliy – User specification

P. Bruzzone; B. Stepanov; R. Wesche; K. Sedlák; D. Uglietti 

2015

Physical Properties of High-Temperature Superconductors

R. Wesche 

Wiley, 2015.

Strain Management in HTS High Current Cables

N. Bykovsky; D. Uglietti; R. Wesche; P. Bruzzone 

IEEE Transactions on Applied Superconductivity. 2015. Vol. 25, num. 3, p. 1-4. DOI : 10.1109/TASC.2014.2360041.

Transverse heat transfer coefficient in the dual channel ITER TF CICCs Part II. Analysis of transient temperature responses observed during a heat slug propagation experiment

M. Lewandowska; R. Herzog; L. Malinowski 

Cryogenics. 2015. Vol. 65, p. 38-48. DOI : 10.1016/j.cryogenics.2014.11.001.

Assessment Studies and Manufacturing Trials for the Conductors of DEMO TF Coils

L. Muzzi; A. Anemona; A. Della Corte; A. Di Zenobio; S. Turtu et al. 

IEEE Transactions on Applied Superconductivity. 2015. Vol. 25, num. 3, p. 1-5. DOI : 10.1109/TASC.2014.2360561.

Applicability of Non-Destructive Examination to Iter TF Joints Nb3Sn

S. A. March; P. Bruzzone; K. Hamada; A. Foussat; A. Bonito-Oliva et al. 

IEEE Transactions on Applied Superconductivity. 2015. Vol. 25, p. 4200505. DOI : 10.1109/TASC.2014.2361407.

Results of the test of a pair of 20 kA HTS currents leads

R. Wesche; P. Bruzzone; C. F. Zignani; L. Affinito; S. Chiarelli et al. 

2014. 11th European Conference on Applied Superconductivity (EUCAS), Genoa, ITALY, SEP 15-19, 2013. p. 032056. DOI : 10.1088/1742-6596/507/3/032056.

Construction and test of a non-insulated insert coil using coated conductor tape

D. Uglietti; R. Wesche; P. Bruzzone 

2014. 11th European Conference on Applied Superconductivity (EUCAS), Genoa, ITALY, SEP 15-19, 2013. DOI : 10.1088/1742-6596/507/3/032052.

Operational experience in the use of 18 kA HTS current leads for Edipo

S. March; R. Wesche; P. Bruzzone 

2014. 11th European Conference on Applied Superconductivity (EUCAS), Genoa, ITALY, SEP 15-19, 2013. p. 032008. DOI : 10.1088/1742-6596/507/3/032008.

Conductor Performance of TFCN4 and TFCN5 Samples for ITER TF Coils

B. Liu; Y. Wu; A. Devred; P. Bruzzone; B. Stepanov et al. 

IEEE Transactions on Applied Superconductivity. 2014. Vol. 25, num. 3, p. 1-5. DOI : 10.1109/TASC.2014.2376931.

Construction and test of a non-insulated insert coil using coated conductor tape

D. Uglietti; R. Wesche; P. Bruzzone 

Journal of Physics: Conference Series. 2014. Vol. 507, num. 3, p. 032052. DOI : 10.1088/1742-6596/507/3/032052.

Superconductivity and fusion energy—the inseparable companions

P. Bruzzone 

Superconductor Science and Technology. 2014. Vol. 28, num. 2, p. 024001. DOI : 10.1088/0953-2048/28/2/024001.

Progresses and challenges in the development of high-field solenoidal magnets based on RE123 coated conductors

C. Senatore; M. Alessandrini; A. Lucarelli; R. Tediosi; D. Uglietti et al. 

Superconductor Science & Technology. 2014. Vol. 27, num. 10, p. 103001. DOI : 10.1088/0953-2048/27/10/103001.

Collective Flux Jumps observed in the Operation of the EDIPO Magnet

P. Bruzzone; S. March; K. Sedlak; B. Stepanov; R. Wesche et al. 

IEEE Transactions on Applied Superconductivity. 2014. Vol. 25, num. 3, p. 4701104. DOI : 10.1109/TASC.2014.2374333.

Summary of the Test Results of ITER Conductors in SULTAN

P. Bruzzone; B. Stepanov; K. Sedlák; N. Mitchell; A. Devred et al. 

2014. 25th Fusion Energy Conference (FEC 2014), Saint Petersburg, Russia, October 13-18, 2014.

Pre-conceptual studies and R&D for DEMO superconducting magnets

P. Bruzzone 

2014. 11th International Symposium on Fusion Nuclear Technology (ISFNT), Barcelona, SPAIN, SEP 15-20, 2013. p. 1775-1778. DOI : 10.1016/j.fusengdes.2013.12.031.

The performance test and analysis of the third and fourth China PF conductor for ITER

B. Liu; Y. Wu; P. Bruzzone; B. Stepanov; J. Qin et al. 

Physica C-Superconductivity And Its Applications. 2014. Vol. 499, p. 9-14. DOI : 10.1016/j.physc.2014.02.001.

Results of the Test of Industrially Manufactured HTS Current Leads With Novel Design Features

R. Wesche; P. Bruzzone; S. March; C. Mueller; M. Vogel et al. 

Ieee Transactions On Applied Superconductivity. 2014. Vol. 24, num. 3, p. 4800205. DOI : 10.1109/Tasc.2013.2281121.

Design and Strand Tests of a Fusion Cable Composed of Coated Conductor Tapes

D. Uglietti; R. Wesche; P. Bruzzone 

Ieee Transactions On Applied Superconductivity. 2014. Vol. 24, num. 3, p. 480704. DOI : 10.1109/Tasc.2013.2281783.

Test Results of RF ITER TF Conductors in the SULTAN Test Facility

V. I. Tronza; S. A. Lelekhov; B. Stepanov; P. Bruzzone; D. S. Kaverin et al. 

Ieee Transactions On Applied Superconductivity. 2014. Vol. 24, num. 3, p. 4801905. DOI : 10.1109/Tasc.2013.2289361.

Recent Tests of the ITER Conductors and Highlights in Nb3Sn Conductors Behavior

B. Stepanov; P. Bruzzone; K. Sedlak; R. Wesche 

IEEE Transactions on Applied Superconductivity Asc. 2014. Vol. 24, num. 3, p. 4802105. DOI : 10.1109/Tasc.2013.2288796.

Impact of Cable Twist Pitch on T-cs-Degradation and AC Loss in Nb3Sn Conductors for ITER Central Solenoids

Y. Nabara; T. Hemmi; H. Kajitani; H. Ozeki; T. Suwa et al. 

Ieee Transactions On Applied Superconductivity. 2014. Vol. 24, num. 3, p. 4200705. DOI : 10.1109/Tasc.2013.2284193.

Optimization of Heat Treatment of Japanese Nb3Sn Conductors for Toroidal Field Coils in ITER

Y. Nabara; T. Hemmi; H. Kajitani; H. Ozeki; T. Suwa et al. 

IEEE Transactions On Applied Superconductivity. 2014. Vol. 24, num. 3, p. 60000605. DOI : 10.1109/Tasc.2013.2286675.

Thermal-Hydraulic Analysis of LTS Cables for the DEMO TF Coil

M. Lewandowska; K. Sedlak 

Ieee Transactions On Applied Superconductivity. 2014. Vol. 24, num. 3, p. 4200305. DOI : 10.1109/Tasc.2013.2281625.

Manufacturing and Preliminary Performance Expectations of Nb3Sn Based Conductors Allocated for the First ITER TF Coil With CICC From Korea

S. P. Kwon; S-H. Park; W. Park; H. Choi; Y. J. Ma et al. 

Ieee Transactions On Applied Superconductivity. 2014. Vol. 24, num. 3, p. 4801605. DOI : 10.1109/Tasc.2013.2287907.

From Conception to Commissioning of EDIPO and SULTAN Quench Detection Systems

G. Croari; P. Bruzzone 

Ieee Transactions On Applied Superconductivity. 2014. Vol. 24, num. 3, p. 4701705. DOI : 10.1109/Tasc.2013.2292325.

Analysis of the CICC Performance Through the Measurement of the Thermal Strain Distribution of the Nb-3 Sn Filaments in the Cable Cross Section

C. Calzolaio; P. Bruzzone 

Ieee Transactions On Applied Superconductivity. 2014. Vol. 24, num. 3, p. 48002204. DOI : 10.1109/Tasc.2013.2290617.

Commissioning of the Main Coil of the EDIPO Test Facility

P. Bruzzone; S. March; G. Croari; M. Jenni; D. Uglietti et al. 

Ieee Transactions On Applied Superconductivity. 2014. Vol. 24, num. 3, p. 9500205. DOI : 10.1109/Tasc.2013.2284721.

Design of Large Size, Force Flow Superconductors for DEMO TF Coils

P. Bruzzone; K. Sedlak; B. Stepanov; L. Muzzi; S. Turtu et al. 

Ieee Transactions On Applied Superconductivity. 2014. Vol. 24, num. 3, p. 4201504. DOI : 10.1109/Tasc.2013.2281.059.

Quench studies of YBCO insulated and noninsulated pancake coils

N. H. Glowa; R. Wesche; P. Bruzzone 

2014.  p. 4701105. DOI : 10.1109/TASC.2013.2287636.

Operational experience in the use of 18 kA HTS current leads

S. A. March; R. Wesche; P. Bruzzone 

2013. EUCAS 2013, Genova, Italy, September 15-19, 2013.

Results of the test of a pair of 20 kA HTS current leads

R. Wesche; P. Bruzzone; C. Fiamozzi Zagnini; L. Affinito; S. Chiarelli et al. 

2013. EUCAS 2013, Genova, Italy, September 15-19, 2013.

High current superconductors for DEMO

P. Bruzzone; K. Sedlak; B. Stepanov 

2013. 27th Symposium on Fusion Technology (SOFT). p. 1564-1568. DOI : 10.1016/j.fusengdes.2012.12.004.

Prospects for the use of high-T-c superconductors in fusion magnets and options for their test in SULTAN

R. Wesche; P. Bruzzone; S. March; C. Marinucci; B. Stepanov et al. 

2013. 27th Symposium on Fusion Technology (SOFT). p. 1495-1498. DOI : 10.1016/j.fusengdes.2013.01.068.

Manufacture of ITER feeder sample conductors

J. Qin; Y. Wu; M. Yu; B. Liu; H. Liu et al. 

2013. 27th Symposium on Fusion Technology (SOFT). p. 1461-1464. DOI : 10.1016/j.fusengdes.2013.01.008.

The performance test and analysis of ITER Main and Correction Busbar conductor

B. Liu; Y. Wu; J. Qin; F. Long; Y. Shi et al. 

Fusion Engineering And Design. 2013. Vol. 88, num. 11, p. 2802-2809. DOI : 10.1016/j.fusengdes.2013.04.029.

Examination of Nb3Sn Conductors for ITER Central Solenoids

Y. Nabara; T. Hemmi; H. Kajitani; H. Ozeki; M. Iguchi et al. 

Ieee Transactions On Applied Superconductivity. 2013. Vol. 23, num. 3, p. 4801604. DOI : 10.1109/Tasc.2013.2244159.

Preliminary Performance Test Results of First CICC From Korea Destined for an ITER TF Magnet

S. P. Kwon; S-H. Park; B. Stepanov; P. Bruzzone; K. Kim 

IEEE Transactions on Applied Superconductivity Asc. 2013. Vol. 23, num. 3, p. 4201705. DOI : 10.1109/Tasc.2013.2244639.

Irreversible Degradation in Nb3Sn Cable in Conduit Conductors

C. Calzolaio / M. Q. Tran; P. Bruzzone (Dir.)  

Lausanne, EPFL, 2013. 

Effect of transverse load on the critical current of a coated conductor Roebel cable

D. Uglietti; R. Wesche; P. Bruzzone 

Superconductor Science & Technology. 2013. Vol. 26, num. 7, p. 074002. DOI : 10.1088/0953-2048/26/7/074002.

The relationship between the n-value and applied strain

C. Calzolaio; P. Bruzzone; F. Roth 

Superconductor Science & Technology. 2013. Vol. 26, num. 7, p. 075024. DOI : 10.1088/0953-2048/26/7/075024.

MgB2 Hollow Wires and Cables Embedded in a Mg Alloy Matrix

G. Giunchi; L. Saglietti; A. F. Albisetti; E. Perini; C. Schiavone et al. 

IEEE Transactions on Applied Superconductivity. 2013. Vol. 23, num. 3, p. 6200605. DOI : 10.1109/Tasc.2012.2230671.

Status of Conductor Qualification for the ITER Central Solenoid

A. Devred; D. Bessette; P. Bruzzone; K. Hamada; T. Isono et al. 

IEEE Transactions on Applied Superconductivity Asc. 2013. Vol. 23, num. 3, p. 6001208. DOI : 10.1109/Tasc.2013.2245391.

Fabrication Trials of Round Strands Composed of Coated Conductor Tapes

D. Uglietti; R. Wesche; P. Bruzzone 

IEEE Transactions on Applied Superconductivity Asc. 2013. Vol. 23, num. 3, p. 4802104. DOI : 10.1109/Tasc.2013.2239351.

Testing of RF 100 m TF Qualification Conductor in the SULTAN Test Facility

V. I. Tronza; V. I. Pantsyrny; B. Stepanov; P. Bruzzone; A. V. Paramonov et al. 

Ieee Transactions On Applied Superconductivity. 2013. Vol. 23, num. 3, p. 9500805. DOI : 10.1109/Tasc.2013.2243798.

SULTAN test facility: Summary of recent results

B. Stepanov; P. Bruzzone; K. Sedlak; G. Croari 

Fusion Engineering And Design. 2013. Vol. 88, num. 5, p. 282-285. DOI : 10.1016/j.fusengdes.2013.02.133.

Experimental and Analytical Approaches on JT-60SA TF Strand and TF Conductor Quality Control During Qualification and Production Manufacture Stages

L. Zani; P. Barabaschi; P. Bruzzone; H. Cloez; E. Di Pietro et al. 

IEEE Transactions on Applied Superconductivity Asc. 2013. Vol. 23, num. 3, p. 4200504. DOI : 10.1109/Tasc.2012.2232951.

Results of the TFEU6 Sample Tested in SULTAN

S. A. March; P. Bruzzone; B. Stepanov; D. Bessette; T. Boutboul et al. 

Ieee Transactions On Applied Superconductivity. 2013. Vol. 23, num. 3, p. 4200204. DOI : 10.1109/Tasc.2012.2228893.

Parametric Study for the Cooling of HTS Current Leads Using a Liquid Nitrogen Bath

M. Lewandowska; R. Wesche 

Ieee Transactions On Applied Superconductivity. 2013. Vol. 23, num. 3, p. 4800304. DOI : 10.1109/Tasc.2012.2232698.

Monitoring of the Thermal Strain Distribution in CICCs During the Cyclic Loading Tests in SULTAN

C. Calzolaio; P. Bruzzone; B. Stepanov 

IEEE Transactions On Applied Superconductivity. 2013. Vol. 23, num. 3, p. 4200404. DOI : 10.1109/Tasc.2012.2235492.

Test Results of a 100 kA NbTi CICC

P. Bruzzone; B. Stepanov; R. Wesche; M. Calvi 

2012. 22nd Int. Conference on Magnet Technology (MT), Marseille, France, September 12-16, 2011. p. 4805304-4805304. DOI : 10.1109/TASC.2011.2174597.

Test Results of ITER Correction Coil Short Samples CCCN1 and CCCN2

H. Liu; Y. Wu; P. Bruzzone; F. Long; Y. Shi et al. 

Fusion Science and Technology. 2012. Vol. 62, num. 2, p. 311-315. DOI : 10.13182/FST12-A14621.

The EDIPO Project: Status and Outlook

A. Portone; J. Amend; W. Baker; P. Bruzzone; F. Cau et al. 

2012. 22nd International Conference on Magnet Technology (MT), Marseille, September 12-16, 2011. DOI : 10.1109/Tasc.2011.2174593.

Conductor Performance Qualification of TFKO3 Sample for ITER TF Magnet

S-H. Park; S. P. Kwon; K. Kim; B. Stepanov; P. Bruzzone 

2012. 22nd International Conference on Magnet Technology (MT)), Marseille, September 12-16, 2011. DOI : 10.1109/Tasc.2011.2178109.

Examination of Japanese Mass-Produced Nb3Sn Conductors for ITER Toroidal Field Coils

Y. Nabara; Y. Nunoya; T. Isono; K. Hamada; Y. Takahashi et al. 

2012. 22nd International Conference on Magnet Technology (MT), Marseille, September 12-16, 2011. DOI : 10.1109/Tasc.2011.2178990.

Manufacture and Acceptance Test of the Full Size ITER PF5 Conductor Sample

F. Long; Y. Wu; F. Liu; B. Liu; Y. Shi et al. 

2012. 22nd International Conference on Magnet Technology (MT), Marseille, September 12-16, 2011. DOI : 10.1109/Tasc.2011.2175432.

Test Results and Investigation of Tcs Degradation in Japanese ITER CS Conductor Samples

T. Hemmi; Y. Nunoya; Y. Nabara; M. Yoshikawa; K. Matsui et al. 

2012. 22nd International Conference on Magnet Technology (MT). DOI : 10.1109/Tasc.2011.2178370.

Test Results of a 100 kA NbTi CICC

P. Bruzzone; B. Stepanov; R. Wesche; M. Calvi 

2012. 22nd International Conference on Magnet Technology (MT). DOI : 10.1109/Tasc.2011.2174597.

Operation and Test Results From the SULTAN Test Facility

P. Bruzzone; B. Stepanov; R. Wesche; C. Calzolaio; S. March et al. 

2012. 22nd International Conference on Magnet Technology (MT). DOI : 10.1109/Tasc.2012.2191483.

Results of the TF conductor performance qualification samples for the ITER project

M. Breschi; A. Devred; M. Casali; D. Bessette; M. C. Jewell et al. 

Superconductor Science & Technology. 2012. Vol. 25, num. 9, p. 095004. DOI : 10.1088/0953-2048/25/9/095004.

Conceptual design and analysis of a cryogenic system for a new test facility for high temperature superconductor current leads (HTS CLs)

M. Lewandowska; M. Bagnasco 

Przeglad Elektrotechniczny. 2012. Vol. 88, p. 140-143.

Development of magnet technologies for HTS insert coils

R. Wesche; D. Uglietti; P. Bruzzone; S. A. March; C. Marinucci et al. 

2012. EUCAS 2011, The Hague, The Netherlands, September 18-23, 2011. p. 1165-1168. DOI : 10.1016/j.phpro.2012.06.195.

Design and manufacture of 20 kA HTS current leads for a hybrid magnet system

R. Wesche; P. Bruzzone; S. A. March; M. Vogel; H. Ehmler et al. 

2012. EUCAS 2011, The Hague, The Netherlands, September 18-23, 2011. p. 927-930. DOI : 10.1016/j.phpro.2012.06.231.

Development of HTS current leads for industrial fabrication

R. Wesche; M. Boersch; P. Bruzzone; F. Holdener; E. Iten et al. 

2012. MT-22, International Conference on Magnet Technology, Marseille, France, September 11-16, 2011. DOI : 10.1109/Tasc.2011.2178013.

Measurement of Tc distribution in NbSn CICC

C. Calzolaio; P. Bruzzone; D. Uglietti 

2012. MEM-11,, Okinawa, Japan, November 2011. p. 054007. DOI : 10.1088/0953-2048/25/5/054007.

In situ Tc measurements of cable in conduit conductors via an inductive method

C. Calzolaio; P. Bruzzone; D. Uglietti; B. Stepanov; D. Bessette et al. 

2012. MT-22, International Conference on Magnet Technology, Marseille, France, September 11-16, 2011. DOI : 10.1109/Tasc.2011.2176459.

Effect of Thermal Loading on Nb3Sn CICC Performance

S. A. March; P. Bruzzone; B. Stepanov; D. Bessette; M. Jewell 

2012. MT-22, International Conference on Magnet Technology, Marseille, France, September 11-16, 2011. DOI : 10.1109/Tasc.2011.2178571.

Test Results of Three Poloidal Field Superconducting Samples in SULTAN

B. Stepanov; P. Bruzzone; R. Wesche; S. Turtù; V. Corato et al. 

2012. MT-22, International Conference on Magnet Technology, Marseille, France, September 11-16, 2011. DOI : 10.1109/Tasc.2011.2176704.

EDIPO quench detection system: concept and development

G. Croari; P. Bruzzone; C. Marinucci; S. A. March; R. Felder 

2012. MT-22, International Conference on Magnet Technology, Marseille, France, September 11-16, 2011. DOI : 10.1109/Tasc.2011.2178011.

Statistical analysis of the current-sharing temperature evolution in Nb3Sn cable-in-conduit-conductors for ITER

D. Uglietti; R. Wesche; B. Stepanov; P. Bruzzone 

2012. MT-22, International Conference on Magnet Technology, Marseille, France, September 11-16, 2011. p. 4802204. DOI : 10.1109/Tasc.2011.2175676.

Design of a quench protection system for a coated conductor insert coil

D. Uglietti; C. Marinucci 

2012. MT-22, International Conference on Magnet Technology, Marseille, France, September 11-16, 2011. p. 4702704. DOI : 10.1109/Tasc.2011.2176455.

Parametric study for the cooling of high temperature superconductor (HTS) current leads

M. Lewandowska; R. Wesche 

2011. CHATS on Applied Superconductivity 2011, Geneva, Switzerland, October 12-14, 2011. p. 31-36. DOI : 10.1016/j.cryogenics.2012.06.014.

Transverse heat transfer coefficient in the dual channel ITER TF CICCs Part I: Analysis of steady state temperature profiles resulting from annular heating

M. Lewandowska; R. Herzog 

Cryogenics. 2011. Vol. 51, p. 598-608. DOI : 10.1016/j.cryogenics.2011.09.003.

Test Result of a Full-Size Nb3Sn Conductor Developed for the ITER TF Coils

Y. Nunoya; Y. Nabara; M. Yoshikawa; K. Matsui; T. Hemmi et al. 

Ieee Transactions On Applied Superconductivity. 2011. Vol. 21, p. 1982-1986. DOI : 10.1109/TASC.2010.2093488.

Status Report of the EDIPO Project

A. Portone; M. Bagnasco; B. Baker; P. Bruzzone; F. Cau et al. 

Ieee Transactions On Applied Superconductivity. 2011. Vol. 21, p. 1953-1959.

Modified friction factor correlation for CICC’s based on a porous media analogy

M. Lewandowska; M. Bagnasco 

Cryogenics. 2011. Vol. 51, p. 541-545. DOI : 10.1016/j.cryogenics.2011.07.003.

Integrated analysis of quench propagation in a system of magnetically coupled superconducting coils

C. Marinucci; L. Bottura; M. Calvi 

2011. CHATS-AS XI, Geneva, Switzerland, October 12-14, 2011. p. 94-106. DOI : 10.1016/j.cryogenics.2012.10.003.

Test of ITER conductors in SULTAN: an update

P. Bruzzone; B. Stepanov; R. Wesche; R. Herzog; C. Calzolaio et al. 

2011. SOFT 2010, Porto, Portugal, September 27 – October 1, 2010. p. 1406-1409. DOI : 10.1016/j.fusengdes.2011.02.061.

Test results of the 18 kA EDIPO HTS current leads

R. Wesche; M. Bagnasco; P. Bruzzone; R. Felder; M. Guetg et al. 

2011. SOFT 2010, Porto, Portugal, September 27 – October 1, 2010. p. 1414-1417. DOI : 10.1016/j.fusengdes.2011.01.026.

Review of design aspects for high current Nb3Sn conductors

P. Bruzzone 

2011. Applied Superconductivity Conference, ASC-2010, Washington, DC, USA, August 1-6, 2010. p. 2036-2041. DOI : 10.1109/TASC.2010.2091095.

Quench analysis of a high-current forced-flow HTS conductor model for fusion magnets

C. Marinucci; L. Bottura; M. Calvi; R. Wesche 

2011. ASC, Washington, DC, USA, August 1-6, 2010. p. 2445-2448. DOI : 10.1109/TASC.2010.2090329.

A parametric AC loss model of the ITER coils for control optimization

C. Marinucci; L. Bottura; M. Calvi 

Cryogenics. 2010. Vol. 50, num. 3, p. 187-199. DOI : 10.1016/j.cryogenics.2009.06.003.

Friction factor correlation for CICC’s based on a porous media analogy

M. Bagnasco; L. Bottura; M. Lewandowska 

Cryogenics. 2010. Vol. 50, num. 11-12, p. 711-719. DOI : 10.1016/i.cryogenics.2010.06.016.

Operation and test results from the SULTAN test facility

P. Bruzzone; B. Stepanov; R. Wesche; M. Bagnasco; R. Herzog et al. 

2010. Applied Superconductivity Conference, ASC-2010, Washington, DC, USA, August 1-6, 2010.

Status report of the EDIPO project

A. Portone; M. Bagnasco; B. Baker; P. Bruzzone; F. Cau et al. 

2010. Applied Superconductivity Conference, ASC-2010, Washington, DC, USA, August 1-6, 2010.

Test results of two ITER Poloidal Field conductor samples in SULTAN

P. Bruzzone; B. Stepanov; R. Wesche; S. Turtu; V. Corato et al. 

2010. Applied Superconductivity Conference, ASC-2010, Washington, DC, USA, August 1-6, 2010.

Qualification of the U.S.-Made Conductors for ITER Toroidal Field (TF) Magnet System

N. N. Martovetsky; D. R. Hatfield; J. R. Miller; P. Bruzzone; B. Stepanov et al. 

2010.  p. 466-469.

Tests and Analyses of Two TF Conductor Prototypes for JT-60SA

L. Zani; P. Barabaschi; P. Bruzzone; D. Ciazynski; P. Decool et al. 

2010. 21st International Conference on Magnet Technology (MT-21), Anhui, PEOPLES R CHINA, Oct 18-23, 2009. p. 451-454. DOI : 10.1109/TASC.2010.2041199.

Results of thermal Strain and Conductor Elongation upon Heat Treatment for Nb3Sn Cable-in-Conduit Conductors

P. Bruzzone; R. Wesche; F. Cau 

2010. 21st International Conference on Magnet Technology (MT-21), Anhui, PEOPLES R CHINA, Oct 18-23, 2009. p. 470-473. DOI : 10.1109/TASC.2010.2042584.

Successful performances of the EU-AltTF sample, a large size Nb3Sn cable-in-conduit conductor with rectangular geometry

A. della Corte; V. Corato; A. Di Zenobio; C. Fiamozzi Zignani; L. Muzzi et al. 

2010. DOI : 10.1088/0953-2048/23/4/045028.

Dependence of the ac loss on the aspect ratio in a cable in conduit conductor

F. Cau; P. Bruzzone 

2010. DOI : 10.1088/0953-2048/23/4/045011.

Test results for a full size Nb3Sn conductor developed for the ITER TF coils

Y. Nunoya; Y. Nabara; M. Yoshikawa; K. Matsui; T. Hemmi et al. 

2010. Applied Superconductivity Conference, ASC-2010, Washington, DC, USA, August 1-6, 2010.

Superconductors for fusion: achievements, open issues, roadmap to future

P. Bruzzone 

2010. ISS2009 – 22nd Int’al Symposium on Superconductivity, Tsukuba, Japan, November 2-4, 2009. p. 1734-1739. DOI : 10.1016/j.physc.2010.05.196.

The result of Russian ITER TF conductor sample test in SULTAN

A. Shikov; V. Pantsyrny; A. Vorobieva; R. Vasilyev; N. Kozlenkova et al. 

2010. MT-21, International Conference on Magnet Technology, Hefei, China, October 17-23, 2009. p. 462-465. DOI : 10.1109/TASC.2010.2040950.

Performance test of TFK02 qualification sample for ITER TF conductor

D. K. Oh; S-H. Park; K. Kim; P. Bruzzone 

2010. MT-21, International Conference on Magnet Technology, Hefei, China, October 17-23, 2009. p. 458-461. DOI : 10.1109/TASC.2010.2044157.

The JT-60SA toroidal field conductor reference sample: manufacturing and test results

L. Muzzi; A. della Corte; S. Di Zenobio; S. Turtu; P. Barabaschi et al. 

2010. MT-21, International Conference on Magnet Technology, Hefei, China, October 17-23, 2009. p. 442-445. DOI : 10.1109/TASC.2010.2041204.

Impact of Sample Preparation Procedure on the Test Results of four US ITER TF Conductors

B. Stepanov; P. Bruzzone; R. Wesche; N. Martovetsky; D. Hatfield et al. 

2010. MT-21, International Conference on Magnet Technology, Hefei, China, October 17-23, 2009. p. 508-511. DOI : 10.1109/TASC.2010.2041761.

Design proposal for ITER feeder busbar system

M. Calvi; P. Bauer; F. Cau; C. Marinucci; P. Bruzzone 

2010. MT-21, International Conference on Magnet Technology, Hefei, China, October 17-23, 2009. p. 407-410. DOI : 10.1109/TASC.2010.2041535.

Status Report of the SULTAN Test Facility

P. Bruzzone; B. Stepanov; R. Wesche; M. Bagnasco; F. Cau et al. 

2010. MT-21, International Conference on Magnet Technology, Hefei, China, October 17-23, 2009. p. 455-457. DOI : 10.1109/TASC.2010.2042583.

Progress in the Integrated Simulation of Thermal-Hydraulic Operation of the ITER Magnet System

M. Bagnasco; D. Bessette; L. Bottura; C. Marinucci 

2010. MT-21, International Conference on Magnet Technology, Hefei, China, October 17-23, 2009. p. 411-414. DOI : 10.1109/TASC.2010.2043836.

Analysis of the EDIPO temperature margin during current ramp-up

C. Marinucci; M. Calvi; L. Bottura; F. Cau; A. Portone 

2010. MT-21, International Conference on Magnet Technology, Hefei, China, October 17-23, 2009. p. 604-607. DOI : 10.1109/TASC.2010.2040380.

Reliability considerations of the ITER Poloidal Field Coils

F. Simon; Y. Ilin; B. Su Lima; F. Cau; R. Herzog et al. 

2010. 21st International Conference on Magnet Technology (MT-21), Anhui, PEOPLES R CHINA, Oct 18-23, 2009. p. 423-426. DOI : 10.1109/TASC.2010.2040262.

Design study of a superconducting magnet system for the European Synchrotron Radiation Facility

F. Cau; P. Bruzzone; M. Vogel 

2010. DOI : 10.1088/0953-2048/23/5/055006.

Interstrand resistance and contact resistance distribution on terminations of ITER short samples

F. Cau; P. Bruzzone; M. Calvi 

2010. 21st International Conference on Magnet Technology (MT-21), Anhui, PEOPLES R CHINA, Oct 18-23, 2009. p. 478-481. DOI : 10.1109/TASC.2010.2042935.

Test results of the first US ITER TF conductor in SULTAN

N. N. Martovetsky; D. R. Hatfield; J. R. Miller; C. Gung; J. S. Schultz et al. 

IEEE Transactions on Applied Superconductivity. 2009. Vol. 19, p. 1478. DOI : 10.1109/TASC.2009.2018204.

Helium Flow and Temperature Distribution in a Heated Dual-Channel CICC Sample for ITER

R. Herzog; M. Lewandowska; M. Bagnasco; M. Calvi; C. Marinucci et al. 

Ieee Transactions On Applied Superconductivity. 2009. Vol. 19, p. 1488-1491. DOI : 10.1109/TASC.2009.2018751.

Qualification tests for ITER TF conductors in SULTAN

P. Bruzzone; B. Stepanov; R. Wesche 

Fusion Engineering and Design. 2009. Vol. 84, p. 205. DOI : 10.1016/j.fusengdes.2008.11.001.

EU contribution to the test and analysis of the ITER poloidal field conductor insert and the central solenoid model coil

R. Zanino; M. Bagnasco; D. Ciazynski; B. Lacroix; E. P. A. Van Lanen et al. 

Superconductor Science and Technology. 2009. Vol. 22, num. 8, p. 085006. DOI : 10.1088/0953-2048/22/8/085006.

Inter-strand resistance measurements in the termination of the ITER SULTAN samples

F. Cau; P. Bruzzone 

2009. DOI : 10.1088/0953-2048/22/4/045012.

Design and manufacture of 17 kA HTS current leads

R. Wesche; M. Vogel; M. Calvi; F. Roth 

2009. EUCAS 2009, Dresden, September 13-17, 2009.

Calorimetric Method Results for Current Sharing Temperature Measurements in ITER Conductor Samples in SULTAN

M. Bagnasco 

2009. 25th Symposium on Fusion Technology, Rostock, GERMANY, Sep 15-19, 2008. p. 423-426. DOI : 10.1016/j.fusengdes.2009.01.060.

Pressure drop measurements in Cable-In-Conduit Conductors (CICC’s) for an extended range of Reynolds number

M. Lewandowska; M. Bagnasco 

2009.  p. 152-155.

Pressure drop measurements in Cable-In-Conduit Conductors (CICC) with different layouts

M. Bagnasco; M. Lewandovska 

2009.  p. 865-870.

Helium Flow and Temperatures in a heated sample of a final ITER TF cable- in-conduit conductor

R. Herzog; M. Lewandowska; M. Calvi; D. Bessette 

2009. EUCAS 2009, Dresden, September 13-17, 2009.

Results of conductor testing in Sultan: a review

E. Todesco; R. Wesche; M. Bagnasco; P. Bruzzone; M. Calvi et al. 

2009. WAMSDO, CERN, Geneva, Switzerland, May 19-23, 2008. p. 68-77.

Status of the EDIPO project

A. Portone; W. Baker; A. Vostner; E. Salpietro; P. Testoni et al. 

2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 1552-1556. DOI : 10.1109/TASC.2009.2018483.

Test results of Japanese SULTAN sample and conductor procurement in Japan for ITER TF Coils

K. Matsui; T. Isono; Y. Nunoya; T. Hemmi; Y. Okui et al. 

2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 1470-1473. DOI : 10.1109/TASC.2009.2017696.

Test results of the first US ITER TF conductors in SULTAN

N. Martovetsky; D. Hatfield; J. Miller; C. Gung; J. Schultz et al. 

2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 1478-1482.

A parametric AC loss model of the ITER coils for control optimization

C. Marinucci; L. Bottura; M. Calvi 

2009. CHATS-AS, Applied Superconductivity, Tsukuba, Japan, October 30-November 1, 2008. p. 187. DOI : 10.1016/j.cryogenics.2009.06.003.

Helium flow-reversal in 3 m long, partially heated sections of dual-channel CICC for ITER

R. Herzog; M. Calvi; C. Marinucci; P. Bruzzone 

2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 1488-1491.

Ic measurements on Nb3Sn strands extracted from ITER CICC prototypes

R. Herzog; R. Wesche; P. Bruzzone 

2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 1440-1443. DOI : 10.1109/TASC.2009.2019218.

Current sharing and AC loss measurements of cable-in-conduit conductor with Nb3Sn strands for the high field section of the series-connected hybrid outsert coil

I. Dixon; M. Bird; P. Bruzzone; B. Stepanov 

2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 2466-2469. DOI : 10.1109/TASC.2009.2018810.

AC Loss Measurements on Cable in Conduit Conductor with Random- Changing Magnetic Fields

F. Cau; P. Bruzzone; F. Staehli 

2009. 25th SOFT, Symposium on Fusion Technology, Rostock, Germany, September 15-19, 2008. p. 569-572. DOI : 10.1016/j.fusengdes.2008.11.040.

AC loss measurements in CICC with different aspect ratio

F. Cau; P. Bruzzone 

2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 2383-2386. DOI : 10.1109/TASC.2009.2018443.

Interstrand resistance and current redistribution in a cable-in-conduit conductor (CICC) termination

F. Cau; M. Bagnasco; P. Bruzzone; M. Calvi; F. Roth 

2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 1452-1456. DOI : 10.1109/TASC.2009.2019219.

Qualification tests and facilities for ITER TF Superconductors

P. Bruzzone; B. Stepanov; R. Wesche; R. Herzog; M. Calvi et al. 

2009. 22nd IAEA Fusion Energy Conf. (FEC) – 50th Anniversary of Controlled Nuclear Fusion Research, Geneva, Switzerland, October 10-18, 2008. DOI : 10.1088/0029-5515/49/6/065034.

Test results of a Nb3Sn cable-in-conduit conductor with variable pitch sequence

P. Bruzzone; B. Stepanov; R. Wesche; A. della Corte; L. Affinito et al. 

2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 1448-1451. DOI : 10.1109/TASC.2009.2018762.

Methods, accuracy and reliability of ITER conductor tests in SULTAN

P. Bruzzone; B. Stepanov; R. Wesche; Y. Ilyin; R. Herzog et al. 

2009. ASC 2008 Applied Superconductivity Conference, Chicago, Illinois, USA, August 17-22, 2008. p. 1508-1511. DOI : 10.1109/TASC.2009.2018508.

Validation of SUPERMAGNET with PFI results

M. Calvi; L. Bottura; C. Marinucci 

2008. CHATS-AS, Applied Superconductivity, Tsukuba, Japan, October 30-November 1, 2008.

Pressure drop measurements in Cable-In-Conduit Conductors (CICC) with different layouts

M. Bagnasco; M. Levandowska 

2008. Int Cryogenic Engineering Conf. 22, and Int. Cryogenic Engineering Conf. 22, Seoul, Korea, July 21-25, 2008.

Calorimetric method results for current sharing temperature Measurements in ITER Conductor Samples in SULTAN

M. Bagnasco 

2008. 25th SOFT, Symposium on Fusion Technology, Rostock, Germany, September 15-19, 2008. DOI : 10.1016/j.fusengdes.2009.01.060.

Stability analysis of the LHC cables for transient heat depositions

P. P. Granieri; M. Calvi; P. Xydi; D. Bocian; L. Bottura et al. 

IEEE Transactions on Applied Superconductivity. 2008. Vol. 18, num. 2, p. 1257-1262. DOI : 10.1109/TASC.2008.922543.

Re-test of the TFAS1 sample with solder filled extremities

B. Stepanov; P. Bruzzone; R. Wesche; M. Bagnasco; M. Vogel et al. 

2008. 20th International Conference on Magnet Technology, Philadelphia, PA, USA, August 27-31, 2007. p. 1080-1083.

A porous medium analogy for the helium flow in CICCs

L. Bottura; C. Marinucci 

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER. 2008. Vol. 51, num. 9-10, p. 2494-2505. DOI : 10.1016/j.ijheatmasstransfer.2007.07.051.

Development of the EFDA dipole high field conductor

A. Vostner; P. Bauer; R. Wesche; U. B. Vetrella; B. Stepanov et al. 

2008. 20th International Conference on Magnet Technology, Philadelphia, PA, USA, August 27-31, 2007. p. 544-547. DOI : 10.1109/TASC.2008.921329.

Manufacturing of the ITER TF full size prototype conductor

U. B. Vetrella; A. della Corte; G. De Marzi; A. Di Zenobio; L. Muzzi et al. 

2008. 20th International Conference on Magnet Technology, Philadelphia, PA, USA, August 27-31, 2007. p. 1105-1108.

Performance of Japanese Nb3Sn conductors for ITER toroidal field coils

Y. Takahashi; T. Isono; N. Koizumi; B. Stepanov; P. Bruzzone 

2008. 20th International Conference on Magnet Technology, Philadelphia, PA, USA, August 27-31, 2007. p. 471-474. DOI : 10.1109/TASC.2008.921866.

Development of a new RF produced internal tin ITER TF conductor sample for testing in SULTAN facility

A. Shikov; V. Pantsyrny; A. Vorobieva; P. Bruzzone 

2008. 20th International Conference on Magnet Technology, Philadelphia, PA, USA, August 27-31, 2007. p. 1076-1079.

Design and procurement of the European dipole (EDIPO) superconducting magnet

A. Portone; W. Baker; E. Salpietro; P. Bruzzone; F. Cau 

2008. 20th International Conference on Magnet Technology, Philadelphia, PA, USA, August 27-31, 2007. p. 499-504.

Winding configurations studies for the EFDA dipole test facility EDIPO

A. Portone; P. Bruzzone; M. Calvi; M. Bagnasco; F. Cau 

2008. 20th International Conference on Magnet Technology, Philadelphia, PA, USA, August 27-31, 2007. p. 196-199.

Development and Sultan test result of ITER conductor samples of Korea

H. C. Kim; D. K. Oh; S. H. Park; K. Kim; P. Bruzzone 

2008. 20th International Conference on Magnet Technology, Philadelphia, PA, USA, August 27-31, 2007. p. 1084-1087.

Inter-strand resistance in the termination of ITER conductors

F. Cau; M. Bagnasco; P. Bruzzone; M. Calvi; F. Roth 

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY. 2008. Vol. 18, num. 2, p. 1101-1104. DOI : 10.1109/TASC.2008.921294.

Preparatory work to host the EDIPO test facility at CRPP

M. Calvi; A. Bagnasco; P. Bruzzone; F. Cau; R. Herzog et al. 

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY. 2008. Vol. 18, num. 2, p. 204-207. DOI : 10.1109/TASC.2008.922280.

Test results of two European ITER TF conductor samples in SULTAN

P. Bruzzone; M. Bagnasco; M. Calvi; F. Cau; D. Ciazynski et al. 

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY. 2008. Vol. 18, num. 2, p. 1088-1091. DOI : 10.1109/TASC.2008.922268.

Results of a new generation of ITER TF conductor samples in SULTAN

P. Bruzzone; B. Stepanov; E. Salpietro; R. Wesche; A. Vostner et al. 

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY. 2008. Vol. 18, num. 2, p. 459-462. DOI : 10.1109/TASC.2008.922266.

The THELMA model of the joint resistance distribution tests with JORDI

F. Bellina; P. Bruzzone 

EEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY. 2008. Vol. 18, num. 2, p. 1092-1096. DOI : 10.1109/TASC.2008.920544.

Pressure drop of cable-in-conduit conductors with different void fraction

M. Bagnasco; L. Bottura; P. Bruzzone; M. Lewandowska; C. Marinucci et al. 

2008. Joint Cryogenic Engineering Conference/International Cryogenic Materials Conference, Chattanooga, TN, USA, July 16-20, 2007. p. 1317-1324. DOI : 10.1063/1.2908489.

Comparison of the performances of the CS model coil and the good joint SULTAN sample

R. Wesche; R. Herzog; P. Bruzzone 

Supercond. Sci. Technol.. 2008. Vol. 21, p. 054001, 6pp. DOI : 10.1088/0953-2048/21/5/054001.

Static and transient electromagnetic features of the EFDA dipole

P. Testoni; F. Cau; A. Fanni; A. Portone; P. Sonato 

IEEE Trans. Appl. Supercond.. 2008. Vol. 18, p. 188-191. DOI : 10.1109/TASC.2008.920676.

Field and temperature dependence of critical currents in industrially manufactured high-Tc wires and tapes

R. Herzog; R. Wesche; P. Bruzzone 

Journal of Physics: Conference Series. 2008. Vol. 97, p. 012208, 1-6. DOI : 10.1088/1742-6596/97/1/012208.

Influence of cable layout on the performance of ITER-like Nb3Sn conductor

D. Ciazynski; L. Zani; P. Bruzzone; B. Stepanov; R. Wesche et al. 

Journal of Physics: Conference Series. 2008. Vol. 97, p. 012027, 1-6. DOI : 10.1088/1742-6596/97/1/012027.

Development of a react and wind conductor for the ITER toroidal field coils

P. Bruzzone; M. Bagnasco; F. Cau; B. Stepanov; R. Wesche 

IEEE Trans. Appl. Supercond.. 2008. Vol. 18, p. 467-470. DOI : 10.1109/TASC.2008.922260.

Solder-filling of a CIC cable for the EFDA dipole magnet

P. Bauer; P. Bruzzone; F. Cau; K. Weiss; A. Portone et al. 

Advances in Cryogenic Engineering Materials, ICMC. 2008. Vol. 54, p. 151-158.

Analysis of the transverse heat transfer coefficients in a dual channel ITER-type cable-in-conduit conductor

C. Marinucci; L. Bottura; P. Bruzzone; B. Stepanov 

2007. CHATS on Applied Superconductivity Workshop 2006, Berkeley, CA, Sep 05-07, 2006. p. 563-576. DOI : 10.1016/j.cryogenics.2007.08.008.

Simulation of the flow-reversal effect in dual-channel CICC for ITER

L. Bottura; P. Bruzzone; M. Calvi; R. Herzog; C. Marinucci 

2007. CHATS on Applied Superconductivity Workshop 2006, Berkeley, CA, Sep 05-07, 2006. p. 553-562. DOI : 10.1016/j.cryogenics.2007.08.005.

Development and results of testing in SULTAN facility of a new RF produced internal tin ITER TF conductor sample

A. Shikov; V. Pantsyrny; A. Vorobieva; P. Bruzzone 

2007. MT-20, International Conference on Magnet Technology, Philadelphia, Penn, USA, 27 August 2007.

Modeling of the effects of current non-uniformity in SULTAN samples using the THELMA code

R. Zanino; F. Bellina; M. Breschi; P. Bruzzone; N. Mitchell et al. 

2007. MT-20, International Conference on Magnet Technology, Philadelphia, Penn, USA, 27 August 2007.

Qualification of the EFDA dipole high field conductor

A. Vostner; P. Bauer; R. Wesche; U. Besi Vetrella; B. Stepanov et al. 

2007. MT-20, International Conference on Magnet Technology, Philadelphia, Penn, USA, 27 August 2007. p. 544.

Static and transient electromagentic features of the EFDA dipole

P. Testoni; F. Cau; A. Fanni; A. Portone; P. Sonato 

2007. MT-20, International Conference on Magnet Technology, Philadelphia, Penn, USA, 27 August 2007.

Design and procurement of the EDIPO superconducting magnet

A. Portone; B. Baker; P. Bauer; E. Salpietro; A. Vostner et al. 

2007. MT-20, International Conference on Magnet Technology, Philadelphia, Penn, USA, 27 August 2007.

Winding configuration studies for the EFDA Dipole Test Facility EDIPO

A. Portone; P. Bruzzone; M. Calvi; M. Bagnasco; F. Cau 

2007. MT-20, International Conference on Magnet Technology, Philadelphia, Penn, USA, 27 August 2007.

Development and SULTAN test result of ITER TF conductor samples of Korea

K. H.C.; O. D.G.; S. Park; K. Kim; P. Bruzzone 

2007. MT-20, International Conference on Magnet Technology, Philadelphia, Penn, USA, 27 August 2007.

Stability analysis of the LCH cables for transient heat depositions

P. P. Granieri; M. Calvi; P. Xydi; D. Bocian; L. Bottura et al. 

2007. MT-20, International Conference on Magnet Technology, Philadelphia, Penn, USA, 27 August 2007.

Retest of the TFAS1 sample with solder filled extremities

B. Stepanov; P. Bruzzone; R. Wesche; M. Bagnasco; M. Vogel et al. 

2007. MT-20, International Conference on Magnet Technology, Philadelphia, Penn, USA, 27 August 2007. p. 1080.

Quench analysis of the EDIPO high field superconducting dipole magnet

C. Marinucci; M. Calvi; L. Bottura; P. Bruzzone; R. Herzog 

2007. MT-20, International Conference on Magnet Technology, Philadelphia, Penn, USA, 27 August 2007.

Pressure drop of cable-in-conduit conductors with different void fraction

M. Bagnasco; L. Bottura; P. Bruzzone; M. Lewandowska; C. Marinucci et al. 

2007. CEC-ICMC, Cryogenic Engineering Conf and International Cryogenic Materials Conference, Chattanooga, Te, USA , 16 July 2007.

review of material properties, past experiences, procedures, issues and results for a possible solder filled cable as Plan B conductor for the EFDA dipole magnet (Draft Vs 1)

P. Bauer; P. Bruzzone; A. Portone; F. Roth; M. Vogel et al. 

2007

Computations of AC loss in the ITER magnets, during fast field transients

L. Bottura; P. Bruzzone; J. B. Lister; C. Marinucci; A. Portone 

Ieee Transactions on Applied Superconductivity. 2007. Vol. 17, num. 2, p. 2438-2441. DOI : 10.1109/TASC.2007.899837.

Test results of two ITER TF conductor short samples using high current density Nb3Sn strands

P. Bruzzone; M. Bagnasco; D. Ciazynski; A. della Corte; A. Di Zenobio et al. 

Ieee Transactions on Applied Superconductivity. 2007. Vol. 17, num. 2, p. 1370-1373. DOI : 10.1109/TASC.2007.898504.

Test results of a large size, forced flow Nb3Sn conductor, based on a design alternative to the cable-in-conduit

P. Bruzzone; R. Herzog; B. Stepanov; M. Vogel; R. Wesche 

Ieee Transactions on Applied Superconductivity. 2007. Vol. 17, num. 2, p. 1473-1476. DOI : 10.1109/TASC.2007.898502.

Results of contact resistance distribution in NbTi and Nb3SnITER conductor termination

P. Bruzzone; B. Stepanov; R. Dettwiler; F. Staehli 

Ieee Transactions on Applied Superconductivity. 2007. Vol. 17, num. 2, p. 1378-1381. DOI : 10.1109/TASC.2007.898505.

Assessment of the effect of current non-uniformity on the ITER Nb3Sn good joint short sample DC performance

L. S. Richard; P. Bruzzone; N. Mitchell; P. L. Ribani; R. Zanino 

Ieee Transactions on Applied Superconductivity. 2007. Vol. 17, num. 2, p. 1382-1385. DOI : 10.1109/TASC.2007.899039.

Design of high-temperature superconductor current leads for ITER

R. Wesche; R. Heller; P. Bruzzone; W. Fietz; R. Lietzov et al. 

Fusion Eng. and Design. 2007. Vol. 82, p. 1385-1390. DOI : 10.1016/j.fusengdes.2007.01.004.

Analysis of DC properties and current distribution in TFAS ITER conductor samples using high J(C) Nb3Sn advanced strands

L. Zani; D. Ciazynski; A. Torre; P. Bruzzone; B. Stepanov et al. 

Ieee Transactions on Applied Superconductivity. 2007. Vol. 17, num. 2, p. 1374-1377. DOI : 10.1109/TASC.2007.899689.

Predictive analysis of the ITER Poloidal Field Conductor Insert (PFCI) test program

R. Zanino; M. Astrov; M. Bagnasco; W. Baker; F. Bellina et al. 

Ieee Transactions on Applied Superconductivity. 2007. Vol. 17, num. 2, p. 1353-1357. DOI : 10.1109/TASC.2007.899046.

High-Temperature Superconductors

R. Wesche 

Springer Handbook of Electronic and Photonic Materials; Springer US, 2006. p. 1193-1218.

New results and remaining issues in superconducting magnets for ITER and associated R&D in Europe

P. Libeyre; D. Ciazynski; P. Decool; P. Bruzzone 

2006. 21th IAEA Fusion Energy Conference, Chengdu, China, 16 October 2006.

Test results from the full size prototype test of W7-X joint

K. Rummel; M. Czerwinski; P. Bruzzone; B. Stepanov; M. Vogel 

2006. SOFT 2006, 24th Symposium on Fusion Technology, Warsaw, Poland, 11 September 2006.

Design, manufacture and first results of a novel, large size, Nb3Sn force flow conductor

P. Bruzzone; B. Stepanov; R. Wesche; M. Vogel 

2006. ICMC 2006. p. 123.

Assessment of the effect of current non-uniformity on the Nb3Sn good joint short sample DC performance

R. Zanino; L. Savoldi-Richard; F. Bellina; P. Bruzzone; N. Mitchell et al. 

2006. ASC 2006.

Analysis of critical electrical properties and current distribution of the first two full size conductor samples using Nb3Sn advanced strands developed for ITER

L. Zani; D. Ciazynski; B. Stepanov; R. Dettwiler; F. Roth 

2006. ASC 2006.

Comparison of the dc performance of various Nb3Sn strands used in cable-in-conduit for fusion

R. Wesche; F. Roth; P. Bruzzone 

2006. ICMC 2006. p. 145.

Analysis of the transverse heat transfer coefficients in a dual channel ITER-type cable-in-conduit conductor

C. Marinucci; L. Bottura; P. Bruzzone; B. Stepanov 

2006. CHATS-AS 2006.

Test results of contact resistance distribution in NbTi and Nb3Sn ITER conductor termination

P. Bruzzone; B. Stepanov; R. Dettwiler; F. Staehli 

2006. ASC 2006.

The results of two ITER TF conductor short samples using high current density Nb3Sn strands

P. Bruzzone; R. Bagnasco; D. Ciazynski; R. Herzog; B. Stepanov et al. 

2006. ASC 2006, Seattle, USA, August 2006. p. 1473.

Simulation of the thermosyphon effect in dual channel CICC for ITER

L. Bottura; P. Bruzzone; R. Herzog; C. Marinucci 

2006. CHATS-AS 2006.

“Final report on “”Tests of advanced Nb3Sn Strands””, EFDA Reference: ASTEST Contract 03-1121, Deliverable 4.3″

R. Wesche; F. Roth; P. Bruzzone 

2006

AC losses computations for ITER magnets (EFDA ref. TW5-TPO-ACLOS/Contract No. 05-1307, Deliverable No. 2 and 3)

C. Marinucci; L. Bottura 

2006

Analysis of the transverse heat transfer coefficients in a dual channel ITER-type cable-in-conduit conductor

L. Bottura; P. Bruzzone; C. Marinucci; B. Stepanov 

2006

Results of contact resistance distribution in ITER size conductor termination

A. Anghel; P. Bruzzone; M. Vogel 

Ieee Transactions on Applied Superconductivity. 2006. Vol. 16, num. 2, p. 779-782. DOI : 10.1109/TASC.2006.873252.

Analysis of transverse heat transfer coefficient in CICC’s with central cooling channel

L. Bottura; P. Bruzzone; C. Marinucci; B. Stepanov 

Cryogenics. 2006. Vol. 46, num. 7-8, p. 597-605. DOI : 10.1016/j.cryogenics.2006.02.004.

30 years of conductors for fusion: A summary and perspectives

P. Bruzzone 

Ieee Transactions on Applied Superconductivity. 2006. Vol. 16, num. 2, p. 839-844. DOI : 10.1109/TASC.2006.873342.

Transverse load degradation in Nb3Sn cable-in-conduit conductors with different cable pattern

P. Bruzzone; B. Stepanov; R. Wesche 

ADVANCES IN CRYOGENIC ENGINEERING. 2006. Vol. 824, p. 558-565.

Test results of a small size CICC with advanced Nb3Sn strands

P. Bruzzone; B. Stepanov; R. Wesche; A. Portone; E. Salpietro et al. 

Ieee Transactions on Applied Superconductivity. 2006. Vol. 16, num. 2, p. 894-897. DOI : 10.1109/TASC.2006.873320.

Results of buoyoncy-gravity effects in ITER cable-in-conduct conductor with dual channel

P. Bruzzone; B. Stepanov; R. Zanino; R. Savoldi 

Adv. Cryo. Eng.. 2006. Vol. 51, p. 1749-1756.

A critical review of coupling loss results for cable-in-conduit conductors

P. Bruzzone; B. Stepanov; E. Zapretilina 

Ieee Transactions on Applied Superconductivity. 2006. Vol. 16, num. 2, p. 827-830. DOI : 10.1109/TASC.2006.871276.

70 kA high temperature superconductor current lead operation at 80 K

R. Heller; W. H. Fietz; R. Lietzow; V. L. Tanna; A. Vostner et al. 

Ieee Transactions on Applied Superconductivity. 2006. Vol. 16, num. 2, p. 823-826. DOI : 10.1109/TASC.2006.871275.

Conceptual design of the 12.5 T superconducting EFDA dipole

A. Portone; E. Salpietro; L. Boitura; P. Bruzzone; W. Fietz et al. 

Ieee Transactions on Applied Superconductivity. 2006. Vol. 16, num. 2, p. 1312-1315. DOI : 10.1109/TASC.2005.864285.

Design and optimization of the 12.5 T EFDA dipole magnet

A. Portone; E. Salpietro; L. Bottura; P. Bruzzone; A. Della Corte et al. 

Cryogenics. 2006. Vol. 46, num. 7-8, p. 494-506. DOI : 10.1016/j.cryogenics.2006.01.011.

Conceptual design of a high temperature superconductor current feeder system for ITER

V. Tanna; W. Fietz; R. Heller; A. Vostner; R. Wesche et al. 

Journal of Physics: Conference Series. 2006. Vol. 43, p. 1023-1026. DOI : 10.1088/1742-6596/43/1/250.

Comparison of the DC performance of full- and sub-size NbTi cable-in-conduit conductors

R. Wesche; B. Stepanov; P. Bruzzone 

Ieee Transactions on Applied Superconductivity. 2006. Vol. 16, num. 2, p. 819-822. DOI : 10.1109/TASC.2006.871274.

Implications of NbTi short-sample test results and analysis for the ITER poloidal field conductor insert (PFCI)

R. Zanino; M. Bagnasco; W. Baker; F. Bellina; P. Bruzzone et al. 

Ieee Transactions on Applied Superconductivity. 2006. Vol. 16, num. 2, p. 886-889. DOI : 10.1109/TASC.2006.873318.

A critical assessment of pressure drop design criteria for the ITER magnet conductors

R. Zanino; P. Bruzzone; R. Savoldi 

Adv. Cryo. Eng.. 2006. Vol. 51, p. 1765-1772.

High temperature superconductor current leads proposal for ITER

W. H. Fietz; R. Heller; R. Lietzow; V. L. Tanna; G. Zahn et al. 

2005. SOFE 2005 : 21st IEEE/NPSS Symposium on Fusion Engineering, Knoxville, TN USA, 26 September 2005.

Implications of NbTi short-sample test results and analysis for the ITER poloidal field conductor insert

R. Zanino; L. Savoldi-Richard; E. Salpietro; P. Bruzzone 

2005. 19th International Conference on Magnet Technology, Genova, Italy, 18 September 2005.

Conceptual design of the 12.5T superconducting EFDA dipole

A. Portone; E. Salpietro; L. Bottura; P. Bruzzone 

2005. 19th International Conference on Magnet Technology, Genova, Italy, 18 September 2005.

A critical review of coupling current losses for cable-in-conduct conductors

P. Bruzzone; B. Stepanov; E. Zapretilina 

2005. 19th International Conference on Magnet Technology, Genova, Italy, 18 September 2005.

30 Years of conductors for fusion. A summary and perspective

P. Bruzzone 

2005. 19th International Conference on Magnet Technology, Genova, Italy, 18 September 2005.

Results of contact resistance distribution in ETER conductor termination

A. Anghel; P. Bruzzone 

2005. 19th International Conference on Magnet Technology, Genova, Italy, 18 September 2005.

A critical assessment of pressure drop design criteria for the ITER conductors

R. Zanino; L. Savoldi-Richard; P. Bruzzone 

2005. CEC/ICMC Cryogenic Engineering/ Int. Cryogenic Materials Conference, Keystone, CO, USA, 29 August 2005.

Results of thermo-siphon occurence in ITER cable-in-conduct conductor with dual channel

P. Bruzzone; B. Stepanov; R. Zanino 

2005. CEC/ICMC Cryogenic Engineering/ Int. Cryogenic Materials Conference, Keystone, CO, USA, 29 August 2005.

Report on the conceptual design of external HTS bus bars – EFDA reference TW4-TMSF-HTSCOM, Deliverable 2

R. Wesche; R. Heller; W. Fietz; V. Tanna; G. Zahn 

2005

Test results of the ITER PF insert conductor short sample in SULTAN

P. Bruzzone; M. Bagnasco; D. Bessette; D. Ciazynski; A. Formisano et al. 

Ieee Transactions on Applied Superconductivity. 2005. Vol. 15, num. 2, p. 1351-1354. DOI : 10.1109/TASC.2005.849084.

Anomalies on V-I characteristic of NbTi cable-in-conduit conductors

P. Bruzzone; B. Stepanov; E. Zapretilina 

Fusion Engineering and Design. 2005. Vol. 75-9, p. 111-115. DOI : 10.1016/j.fusengdes.2005.06.091.

DC performances of ITER NbTi conductors: Models vs. measurements

D. Ciazynski; D. Bessette; P. Bruzzone; N. Martovetsky; B. Stepanov et al. 

Ieee Transactions on Applied Superconductivity. 2005. Vol. 15, num. 2, p. 1355-1358. DOI : 10.1109/TASC.2005.849086.

High temperature superconductors for the ITER magnet system and beyond

W. H. Fietz; S. Fink; R. Heller; P. Komarek; V. L. Tanna et al. 

Fusion Engineering and Design. 2005. Vol. 75-9, p. 105-109. DOI : 10.1016/j.fusengdes.2005.06.198.

DC and transient current distribution analysis from self-field measurements on ITER PFIS conductor

A. Formisano; Y. Ilyin; L. Muzzi; R. Martone; P. Gislon et al. 

Fusion Engineering and Design. 2005. Vol. 75-9, p. 11-15. DOI : 10.1016/j.fusengdes.2005.06.075.

Experimental results of a 70 kA high temperature superconductor current lead demonstrator for the ITER magnet system

R. Heller; S. M. Darweschsad; G. Dittrich; W. H. Fietz; S. Fink et al. 

Ieee Transactions on Applied Superconductivity. 2005. Vol. 15, num. 2, p. 1496-1499. DOI : 10.1109/TASC.2005.849145.

Design and manufacture of a full size joint sample (FSJS) for the qualification of the poloidal field (PF) Insert coil

F. H. Hurd; C. Sborchia; E. Salpietro; D. Duglue; C. Keefe et al. 

Ieee Transactions on Applied Superconductivity. 2005. Vol. 15, num. 2, p. 1379-1382. DOI : 10.1109/TASC.2005.849095.

Effect of cyclic loading and conductor layout on contact resistance of full-size ITER PFCI conductors

Y. A. Ilyin; A. Nijhuis; W. Abbas; P. Bruzzone; B. Stepanov et al. 

Ieee Transactions on Applied Superconductivity. 2005. Vol. 15, num. 2, p. 1359-1362. DOI : 10.1109/TASC.2005.849088.

Reconstruction of current unbalance in full-size ITER NbTiCICC by self-field measurements

Y. A. Ilyin; A. Nijhuis; H. H. J. ten Kate; R. Bruzzone; B. Stepanov 

Ieee Transactions on Applied Superconductivity. 2005. Vol. 15, num. 2, p. 1391-1394. DOI : 10.1109/TASC.2005.849098.

Pressure drop of the ITER PFCI cable-in-conduit conductor

C. Marinucci; P. Bruzzone; A. della Corte; L. S. Richard; R. Zanino 

Ieee Transactions on Applied Superconductivity. 2005. Vol. 15, num. 2, p. 1383-1386. DOI : 10.1109/TASC.2005.849096.

Effect of conduit material on CiCC performance under high cycling loads

N. N. Martovetsky; P. Bruzzone; B. Stepanov; R. Wesche; C. Y. Gung et al. 

Ieee Transactions on Applied Superconductivity. 2005. Vol. 15, num. 2, p. 1367-1370. DOI : 10.1109/TASC.2005.849091.

A low cost joint for the ITER PF coils, design and test results

B. Stepanov; P. Bruzzone; M. Vogel 

Fusion Engineering and Design. 2005. Vol. 75-9, p. 259-263. DOI : 10.1016/j.fusengdes.2005.06.092.

The ITER toroidal field model coil project

A. Ulbricht; J. L. Duchateau; W. H. Fietz; D. Ciazynski; H. Fillunger et al. 

Fusion Engineering and Design. 2005. Vol. 73, num. 2-4, p. 189-327. DOI : 10.1016/j.fusengdes.2005.07.002.

Analyses and implications of V-I characteristic of PF insert conductor sample

R. Wesche; A. Anghel; P. Bruzzone; P. Gislon; L. Muzzi 

Fusion Engineering and Design. 2005. Vol. 75-9, p. 229-233. DOI : 10.1016/j.fusengdes.2005.06.158.

DC performance, AC loss and transient field stability of five medium size NbTi cable-in-conduit conductors with parametric variations

R. Wesche; A. Anghel; B. Stepanov; M. Vogel; P. Bruzzone 

Cryogenics. 2005. Vol. 45, num. 12, p. 755-779. DOI : 10.1016/j.cryogenics.2005.10.002.

Use of high temperature superconductors for future fusion magnet system

W. H. Fietz; R. Wesche; G. Pasztor; A. Vostner; E. Salpietro 

2004. IAEA Fusion Energy Conference, Vilamoura, Portugal, 2004.

JORDI, a test facility for measurement of contact resistance distribution in full-size conductor terminations

A. Anghel; P. Bruzzone 

Ieee Transactions on Applied Superconductivity. 2004. Vol. 14, num. 2, p. 1460-1463. DOI : 10.1109/TASC.2004.830653.

The index n of the voltage-current curve, in the characterization and specification of technical superconductors

P. Bruzzone 

Physica C-Superconductivity and Its Applications. 2004. Vol. 401, num. 1-4, p. 7-14. DOI : 10.1016/j.physc.2003.09.005.

Test results on the first 50 kA NbTi full size sample for the International Thermonuclear Experimental Reactor

D. Ciazynski; L. Zani; M. Ciotti; P. Gislon; M. Spadoni et al. 

Superconductor Science & Technology. 2004. Vol. 17, num. 5, p. S155-S160. DOI : 10.1088/0953-2048/17/5/013.

The voltage-current relations for MgB2 obtained by reactive liquid infiltration

G. Giunchi; S. Raineri; R. Wesche; P. L. Bruzzone 

Physica C-Superconductivity and Its Applications. 2004. Vol. 401, num. 1-4, p. 310-315. DOI : 10.1016/j.physc.2003.09.061.

Design and fabrication of a 70 kA current lead using Ag/Au stabilized Bi-2223 tapes as a demonstrator for the ITER TF-coil system

R. Heller; D. Aized; A. Akhmetov; W. H. Fietz; F. Hurd et al. 

IEEE Transactions on Applied Superconductivity. 2004. Vol. 14 (2004), num. 2, p. 1774-1777. DOI : 10.1109/TASC.2004.831075.

Analysis and interpretation of Tcs tests of the ITER Toroidal Field Conductor Insert

C. Marinucci; L. Bottura; P. Bruzzone; N. Mitchell; B. Stepanov et al. 

Ieee Transactions on Applied Superconductivity. 2004. Vol. 14, num. 2, p. 1523-1526. DOI : 10.1109/TASC.2004.830685.

Ic(B,T,strain) characterization of a Nb3Sn internal tin strand with enhanced specifications for use in fusion conductors

G. Pasztor; P. Bruzzone 

Advances in Cryogenic Engineering. 2004. Vol. 50B, p. 458-465.

An alternative CICC design aimed at understanding critical performance issues in Nb3Sn conductors for ITER

G. Pasztor; P. Bruzzone; A. Anghel; B. Stepanov 

Ieee Transactions on Applied Superconductivity. 2004. Vol. 14, num. 2, p. 1527-1530. DOI : 10.1109/TASC.2004.830686.

Impact of impressed current unbalance on n-index

B. Stepanov; A. Anghel; P. Bruzzone; M. Vogel 

Ieee Transactions on Applied Superconductivity. 2004. Vol. 14, num. 2, p. 1495-1498. DOI : 10.1109/TASC.2004.830667.

Sudden take-off in large NbTi conductors: not a stability issue

R. Wesche; A. Anghel; P. Bruzzone; B. Stepanov 

ADVANCES IN CRYOGENIC ENGINEERING. 2004.  p. 820-827.

DC performance of subsize NbTi cable-in-conduit conductors

R. Wesche; A. Anghel; B. Stepanov; P. Bruzzone 

IEEE Transactions on Applied Superconductivity. 2004. Vol. 14 (2004), num. 2, p. 1499-1502. DOI : 10.1109/TASC.2004.830669.

Self-field effects in NbTi subsize cable-in-conduit conductors

R. Wesche; B. Stepanov; A. Anghel; S. Huber; G. Pasztor et al. 

Physica C-Superconductivity and Its Applications. 2004. Vol. 401, num. 1-4, p. 113-117. DOI : 10.1016/j.physc.2003.09.020.

Effect of current distribution on the voltage-temperature characteristics: study of the NbTiPF-FSJS sample for ITER

L. Zani; D. Ciazynski; P. Gislon; B. Stepanov; S. Huber 

Physica C-Superconductivity and Its Applications. 2004. Vol. 401, num. 1-4, p. 99-102. DOI : 10.1016/j.physc.2003.09.017.

Analysis of thermal-hydraulic effects in the testing of the ITER poloidal field full size joint sample

R. Zanino; M. Bagnasco; P. Bruzzone; M. Ciotti; P. Gislon et al. 

Advances in Cryogenic Engineering. 2004. Vol. 49A, p. 544-551.

First operational results of the 3rd harmonic superconducting cavities in SLS and ELETTRA

M. Pedrozzi; W. Gloor; A. Anghel 

2003. 2003 Particle Accelerator Conference.

Test results for Nb3Sn internal Sn strands for fusion conductors

G. Pasztor; P. Bruzzone 

2003. Cryogenic Engineering Conference.

The index n of the current-voltage curve, in the characterization and specificatin of technical superconductors

P. Bruzzone 

2003. 

Analysis of current redistribution in a CICC under transient heat pulses

L. Bottura; P. Bruzzone; C. Marinucci 

2003. Cryogenic Engineering Conference.

Jordi, test facility for measurement of contact resistance in full-size conductor terminations

A. Anghel; P. Bruzzone 

2003. MT-18 Conference.

Final report on the analysis and interpretation of Tcs tests of the ITER toroidal field conductor insert (Task GB8-M12, deliverable #7)

C. Marinucci 

2003

A simple model for the prediction of quench point in cable-in-conduit conductors

A. Anghel 

Cryogenics. 2003. Vol. 43, num. 3-5, p. 225-232. DOI : 10.1016/S0011-2275(03)00039-0.

Parametric studies of subsize NbTi cable-in-conduit superconductors for ITER-FEAT

P. Bruzzone; B. Stepanov; M. Vogel; T. Gloor; R. Wesche 

IEEE Transactions on Applied Superconductivity. 2003. Vol. 13 (2003), num. 2, p. 1456-1459. DOI : 10.1109/TASC.2003.812738.

The voltage/current characteristic (n index) of the cable-in-conduit conductors for fusion

P. Bruzzone; R. Wesche; B. Stepanov 

IEEE Transactions on Applied Superconductivity. 2003. Vol. 13, num. 2, p. 1452-1455. DOI : 10.1109/TASC.2003.812737.

Recent results from R&D on superconductors at CRPP

P. Bruzzone; R. Wesche; B. Stepanov; M. Vogel 

Nuclear Fusion. 2003. Vol. 43, num. 8, p. 660-664. DOI : 10.1088/0029-5515/43/8/303.

High performance new MgB2 superconducting hollow wires

G. Giunchi; S. Ceresara; G. Ripamonti; A. Di Zenobio; S. Rossi et al. 

Superconductor Science & Technology. 2003. Vol. 16, num. 2, p. 285-291. DOI : 10.1088/0953-2048/16/2/328.

Self field measurements by hall sensors on the SeCRETS short sample CICC’s subjected to cyclic load

Y. A. Ilyin; A. Nijhuis; H. H. J. ten Kate; B. Stepahov; P. Bruzzone 

Ieee Transactions on Applied Superconductivity. 2003. Vol. 13, num. 2, p. 1752-1755. DOI : 10.1109/TASC.2003.812880.

Quench simulation in superconducting cables using optimized DRP scheme

S. L. Mao; C. A. Luongo; C. Marinucci 

Ieee Transactions on Applied Superconductivity. 2003. Vol. 13, num. 2, p. 1692-1695. DOI : 10.1109/TASC.2003.812869.

Analysis of the measurement of the current sharing temperature in the ITER TF model coil

C. Marinucci; L. Bottura; P. Bruzzone 

Fusion Engineering and Design. 2003. Vol. 66-8, p. 1001-1005. DOI : 10.1016/S0920-3796(03)00241-2.

Overview of JET results

J. Pamela; E. R. Solano; J. M. Adams; G. Agarici; M. Agarici et al. 

Nuclear Fusion. 2003. Vol. 43, num. 12, p. 1540-1554. DOI : 10.1088/0029-5515/43/12/002.

Test results and analyses of conductor short samples for HT-7U

P. D. Weng; P. Bruzzone; Z. M. Chen; B. Stepanov; J. L. Chen et al. 

Cryogenics. 2003. Vol. 43, num. 3-5, p. 165-171. DOI : 10.1016/S0011-2275(03)00033-X.

DC behaviour of NbTi cable-in-conduit conductors for ITER-FEAT

R. Wesche; B. Stepanov; M. Vogel; T. Gloor; P. Bruzzone 

Fusion Engineering and Design. 2003. Vol. 66-8, p. 1091-1095. DOI : 10.1016/S0920-3796(03)00229-1.

Test results and preliminary analysis of HT-7U short samples

W. P.D.; P. Bruzzone; C. Z.M.; B. Stepanov; C. J.L. et al. 

2002. CHATS-2002.

Cryogenic system for the SLS third harmonic RF cavity

P. Marchand; W. Gloor; M. Pedrozzi; A. Anghel; P. Bredy 

2002. EPAC 2002.

Self field measurements fy Hall sensors on the SeCRETS short sample CICC_s subjected to cyclic load

Y. Ilyin; A. Nijhuis; H. TenKate; P. Bruzzone 

2002. ASC-2002.

Super 3HC cryomodule general layout and first tests

S. Chel; P. Bosland; P. Bredy; A. Anghel 

2002. EPAC 2002.

Learning about hydraulics and stability through an AC loss test

P. Bruzzone 

2002. CHATS-2002.

Analysis of current redistribution in a cable-in-conduit

L. Bottura; C. Marinucci; P. Bruzzone 

2002. CHATS-2002.

A simple model for the prediction of quench point in cable-in-conduit conductors

A. Anghel 

2002. CHATS-2002.

The cryogenic system for the third harmonic superconductivity cavity at SLS and Electra

A. Anghel; P. Marchand; M. Pedrozzi; P. Bredy 

2002. 19th Int. Cryogenic Engineering Conference and Industrial Exhibition (ICEC-19).

Thermodynamic optimisation of 70kA bimary current lead

R. Wesche 

2002

Plasma Current, Position and Shape Control, Contract FU05-CT2001-00018 (EFDA/00-551)

J. Lister; P. Bruzzone; J. Favez; B. Schaerz; L. Bugnion et al. 

2002

Application of the code THEA to the CONDOPT experiment in SULTAN

L. Bottura; C. Marinucci; P. Bruzzone 

Ieee Transactions on Applied Superconductivity. 2002. Vol. 12, num. 1, p. 1528-1532. DOI : 10.1109/TASC.2002.1018693.

Coupling currents loss in Nb3Sn cable-in-conduit conductors

P. Bruzzone 

Ieee Transactions on Applied Superconductivity. 2002. Vol. 12, num. 1, p. 524-527. DOI : 10.1109/TASC.2002.1018458.

Upgrade of operating range for SULTAN test facility

P. Bruzzone; A. Anghel; A. Fuchs; G. Pasztor; B. Stepanov et al. 

Ieee Transactions on Applied Superconductivity. 2002. Vol. 12, num. 1, p. 520-523. DOI : 10.1109/TASC.2002.1018457.

Optimal magnetic probes location for current reconstruction in multistrands superconducting cables

P. Bruzzone; A. Formisano; R. Martone 

Ieee Transactions on Magnetics. 2002. Vol. 38, num. 2, p. 1057-1060. DOI : 10.1109/20.996271.

Transient stability results for Nb3Sn cable-in-conduit conductors

P. Bruzzone; A. Fuchs; B. Stepanov; G. Vecsey 

Ieee Transactions on Applied Superconductivity. 2002. Vol. 12, num. 1, p. 512-515. DOI : 10.1109/TASC.2002.1018455.

Performance evolution of Nb3Sn cable-in-conduit conductors under cyclic load

P. Bruzzone; A. M. Fuchs; B. Stepanov; G. Vecsey 

Ieee Transactions on Applied Superconductivity. 2002. Vol. 12, num. 1, p. 516-519. DOI : 10.1109/TASC.2002.1018456.

Test results of a 10 kA current lead using Ag/Au cladded Bi-2212 tubes

A. M. Fuchs; R. Wesche; A. Anghel; F. Roth; R. Heller et al. 

Ieee Transactions on Applied Superconductivity. 2002. Vol. 12, num. 1, p. 1281-1284. DOI : 10.1109/TASC.2002.1018636.

Development of high temperature superconductor current leads for 70 kA

R. Heller; G. Friesinger; A. M. Fuchs; R. Wesche 

Ieee Transactions on Applied Superconductivity. 2002. Vol. 12, num. 1, p. 1285-1288. DOI : 10.1109/TASC.2002.1018637.

Self field measurements by Hall sensors on the SeCRETS long sample CICCs in SULTAN

Y. A. Ilyin; A. Nijhuis; H. H. J. ten Kate; P. Bruzzone 

Ieee Transactions on Applied Superconductivity. 2002. Vol. 12, num. 1, p. 1667-1671. DOI : 10.1109/TASC.2002.1018727.

Critical current test results of 13 T-46 kA Nb3Al cable-in-conduit conductor

N. Koizumi; Y. Takahashi; Y. Nunoya; K. Matsui; T. Ando et al. 

Cryogenics. 2002. Vol. 42, num. 11, p. 675-690. DOI : 10.1016/S0011-2275(02)00128-5.

Transient stability analysis of the SeCRETS experiment in SULTAN

C. Marinucci; L. Bottura; P. Bruzzone 

Ieee Transactions on Applied Superconductivity. 2002. Vol. 12, num. 1, p. 1524-1527. DOI : 10.1109/TASC.2002.1018692.

High-Temperature Superconductors: A New Class of Materials for Fusion Magnets

R. Wesche 

2001. 2001 Swiss Workshop on Materials with Novel Electronic Properties.

Performance Results of Nb3Sn Cable-in-Conduit Conductors under cyclic Load

P. Bruzzone; A. Fuchs; B. Stepanov; G. Vecsey 

2001. MT 17.

The effect of the feedback controller on superconducting tokamak AC losses

B. Schärz; P. Bruzzone; J-Y. Favez; J. Lister; E. Zapretilina 

2001

Segregated Copper Ratio Experiment on Transient Stability (SeCRETS) – EU Task M29 / ITER Task N11TT03

P. Bruzzone 

2001

Superconductivity: Hysteresis and Coupling Losses

P. Bruzzone 

Engineering Superconductivity; Wiley-Interscience, 2001. p. 138-152.

Forced Flow Conductor Manufacturing

P. Bruzzone 

Engineering Superconductivity; Wiley-Interscience, 2001. p. 218-240.

Self-field effects in large superconducting cables for ITER

A. Anghel 

Fusion Engineering and Design. 2001. Vol. 58-9, p. 7-11. DOI : 10.1016/S0920-3796(01)00466-5.

Superconductors and joints, tests and trends for future development

P. Bruzzone 

Fusion Engineering and Design. 2001. Vol. 56-7, p. 125-134. DOI : 10.1016/S0920-3796(01)00244-7.

Pressure drop and helium inlet in ITER CS1 conductor

P. Bruzzone 

Fusion Engineering and Design. 2001. Vol. 58-9, p. 211-215. DOI : 10.1016/S0920-3796(01)00435-5.

Contact resistance distribution at the termination of cable-in-conduit conductors

P. Bruzzone 

Ieee Transactions on Applied Superconductivity. 2001. Vol. 11, num. 1, p. 1893-1895. DOI : 10.1109/77.920219.

Test results of SeCRETS, a stability experiment about segregated copper in CICC

P. Bruzzone; A. M. Fuchs; B. Stepanov; G. Vecsey; E. Zapretilina 

Ieee Transactions on Applied Superconductivity. 2001. Vol. 11, num. 1, p. 2018-2021. DOI : 10.1109/77.920250.

Test program preparations of the ITER toroidal field model coil (TFMC)

J. L. Duchateau; H. Fillunger; S. Fink; R. Heller; P. Hertout et al. 

Fusion Engineering and Design. 2001. Vol. 58-9, p. 147-151. DOI : 10.1016/S0920-3796(01)00570-1.

Facility status and results on ITER full-size conductor tests in SULTAN

A. M. Fuchs; B. Blau; P. Bruzzone; G. Vecsey; M. Vogel 

Ieee Transactions on Applied Superconductivity. 2001. Vol. 11, num. 1, p. 2022-2025. DOI : 10.1109/77.920251.

Development program of a 60 kA high temperature superconductor current lead for the ITER toroidal field coils

R. Heller; G. Friesinger; A. M. Fuchs; P. Komarek; T. Mito et al. 

Fusion Engineering and Design. 2001. Vol. 58-9, p. 105-109. DOI : 10.1016/S0920-3796(01)00354-4.

Development of a 20 kA high temperature superconductor current lead

R. Heller; G. Friesinger; A. M. Fuchs; T. Mito; S. Satoh et al. 

Cryogenics. 2001. Vol. 41, num. 8, p. 539-547. DOI : 10.1016/S0011-2275(01)00101-1.

Evaluation of critical current performance of 13 T-46 kA steel jacketed Nb3Al conductor

N. Koizumi; K. Azuma; Y. Tsuchiya; K. Matsui; Y. Takahashi et al. 

Fusion Engineering and Design. 2001. Vol. 58-9, p. 1-5. DOI : 10.1016/S0920-3796(01)00465-3.

High current applications of high-temperature superconductors, Invited paper

R. Wesche; A. Anghel; A. Fuchs; G. Pasztor; G. Vecsey 

2000. Société Suisse de Physique.

High current conductors for superconducting fusion magnets, Invited paper

G. Vecsey 

2000. Société Suisse de Physique.

Progress of the ITER cental solenoid model coil program

H. Tsuji; K. Okuno; R. Thome; G. Vécsey 

2000. 18th IAEA Fusion Energy Conference.

The SUPER-3HC project: an idle superconducting harmonic cavity for bunch length manipulation

M. Svandrlik; C. Pasotti; P. Marchand; P. Bosland; A. Anghel 

2000. 

Predictive quench initiation analysis of the ITER TF model coil

C. Marinucci; L. Bottura 

2000. ICEC-18. p. 173-178.

The technical issues associated with the control of steady-state tokamaks

J. Lister; P. Bruzzone; A. Costley; T. Fukuda; Y. Gribov et al. 

2000. 2nd IAEA Technical Committee Meeting on Steady-State Operation of Magnetic Fusion Devices – Plasma Control and Plasma Facing Components.

Superconductors, Forces flow conductor manufacture

P. Bruzzone 

Wiley Encyclopedia of Electrical and Electronic Engineering, Suppl. 1; Wiley & Sons, 2000. p. 643-665.

Hysteresis and coupling losses in superconductors

P. Bruzzone 

Wiley Encyclopedia of Electrical and Electronic Engineering, Suppl. 1; Wiley & Sons, 2000. p. 233-248.

Design, construction and operation of a neon refrigeration system for a HTS power transmission prototype cable

A. Anghel; B. Jakob; G. Pasztor; R. Wesche; G. Vécsey et al. 

Advances in Cryogenic Engineering,. 2000. Vol. 45, p. 1419-1426.

Correlation between quench pressure and normal zone voltage observed in the QUELL experiment

A. Anghel; S. Pourrahimi; Y. Takahashi; G. Vecsey 

Cryogenics. 2000. Vol. 40, num. 8-10, p. 549-553. DOI : 10.1016/S0011-2275(01)00011-X.

Two-channel analysis of QUELL experimental results

L. Bottura; C. Marinucci; C. Rosso 

Ieee Transactions on Applied Superconductivity. 2000. Vol. 10, num. 1, p. 1106-1109. DOI : 10.1109/77.828426.

Stability under transverse field pulse of the Nb3Sn ITER cable-in-conduit conductor

P. Bruzzone 

Ieee Transactions on Applied Superconductivity. 2000. Vol. 10, num. 1, p. 1062-1065. DOI : 10.1109/77.828415.

Manufacture and performance results of an improved joint for the ITER conductors

P. Bruzzone 

Adv. Cryog. Eng.. 2000. Vol. 45, p. 737-744.

Test results for the high field conductor of the ITER central solenoid model coil

P. Bruzzone; A. Fuchs; G. Vecsey; E. Zapretilina 

Adv. Cryog. Eng.. 2000. Vol. 45, p. 729-736.

Characterization tests of the Nb3Sn cable-in-conduit conductors for Se.CRETS

P. Bruzzone; A. Shikov; A. Vorobieva; V. Sytnikov; A. Nijhuis et al. 

Ieee Transactions on Applied Superconductivity. 2000. Vol. 10, num. 1, p. 1086-1089. DOI : 10.1109/77.828421.

Se.CRETTS : A stability experiment on the role of segregated copper in Nb3Sn cable-in-conduit conductors

P. Bruzzone; G. Vecsey; A. Shikov; V. Pantsyrny; V. Sytnikov et al. 

Ieee Transactions on Applied Superconductivity. 2000. Vol. 10, num. 1, p. 1082-1085. DOI : 10.1109/77.828420.

Test results and analysis of two European full-size conductor samples for ITER

D. Ciazynski; J. L. Duchateau; T. Schild; A. M. Fuchs 

Ieee Transactions on Applied Superconductivity. 2000. Vol. 10, num. 1, p. 1058-1061. DOI : 10.1109/77.828414.

Test results of a 10 kA current lead using Ag/Au stabilized Bi-2223 tapes

R. Heller; M. Tasca; P. Erismann; A. M. Fuchs; M. Vogel 

Ieee Transactions on Applied Superconductivity. 2000. Vol. 10, num. 1, p. 1470-1473. DOI : 10.1109/77.828518.

Technical issues associated with the control of steady state tokamaks

J. B. Lister; P. L. Bruzzone; A. E. Costley; T. Fukuda; Y. Gribov et al. 

Nuclear Fusion. 2000. Vol. 40, num. 6, p. 1167-1181. DOI : 10.1088/0029-5515/40/6/314.

Proposal for a database for the validation of simulations in superconducting cables

C. Marinucci; L. Bottura; C. Luongo; G. Vecsey 

Cryogenics. 2000. Vol. 40, num. 8-10, p. 677-678. DOI : 10.1016/S0011-2275(01)00025-X.

Heat front propagation and quench initiation analysis of the ITER toroidal field model coil

C. Marinucci; G. Vecsey 

Cryogenics. 2000. Vol. 40, num. 8-10, p. 501-510. DOI : 10.1016/S0011-2275(01)00006-6.

Manufacture and testing of a neon gas-cooled HTS prototype cable for power transmission

G. Pasztor; A. Anghel; A. M. Fuchs; B. Jakob; D. Trajkovic et al. 

1999. EUCAS’99. p. 1119-1122.

NbTi conductor with ITER CSMC geometry

B. Blau 

1999. Workshop on Short Sample Conductor Test Results.

Technical issues associated with the control of steady-state tokamaks

J. Lister; P. Bruzzone; A. Costley; T. Fukuda; Y. Gribov et al. 

1999

Stability and quench of dual cooling channel cable-in-conduct superconductors

B. Blau 

1999

Strand resistance distribution in an improved full size joint for the ITER conductors

P. Bruzzone 

Ieee Transactions on Applied Superconductivity. 1999. Vol. 9, num. 2, p. 1012-1015. DOI : 10.1109/77.783470.

Design study of a large-gap superconducting spectrometer dipole

D. C. George; V. Vrankovic; J. A. Zichy; R. K. Maix 

Ieee Transactions on Applied Superconductivity. 1999. Vol. 9, num. 2, p. 471-474. DOI : 10.1109/77.783337.

Status of the development program of a 60 kA HTSC current lead for the ITER toroidal field coils

R. Heller; G. Friesinger; W. Goldacker; M. Quilitz; M. Tasca et al. 

Ieee Transactions on Applied Superconductivity. 1999. Vol. 9, num. 2, p. 507-510. DOI : 10.1109/77.783346.

The hydraulic solver Flower and its validation against the QUELL experiment in SULTAN

C. Marinucci; L. Bottura 

Ieee Transactions on Applied Superconductivity. 1999. Vol. 9, num. 2, p. 616-619. DOI : 10.1109/77.783371.

Stability analysis of the ITER TF and CS conductors using the code Gandalf

C. Marinucci; L. Savoldi; R. Zanino 

Ieee Transactions on Applied Superconductivity. 1999. Vol. 9, num. 2, p. 612-615. DOI : 10.1109/77.783370.

Electromagnetic and mechanical characterisation of ITER CS-MC conductors affected by transverse cyclic loading, part 2: Interstrand contact resistances

A. Nijhuis; N. H. W. Noordman; H. H. J. ten Kate; N. Mitchell; P. Bruzzone 

Ieee Transactions on Applied Superconductivity. 1999. Vol. 9, num. 2, p. 754-757. DOI : 10.1109/77.783404.

Electromagnetic and mechanical characterisation of ITER CS-MC conductors affected by transverse cyclic loading, part 1: Coupling current loss

A. Nijhuis; N. H. W. Noordman; H. H. J. ten Kate; N. Mitchell; P. Bruzzone 

Ieee Transactions on Applied Superconductivity. 1999. Vol. 9, num. 2, p. 1069-1072. DOI : 10.1109/77.783482.

Design of superconducting power cables

R. Wesche; A. Anghel; B. Jakob; G. Pasztor; R. Schindler et al. 

Cryogenics. 1999. Vol. 39, num. 9, p. 767-775. DOI : 10.1016/S0011-2275(99)00098-3.

Heat slug propagation in QUELL. Part I: Experimental setup and 1-fluid GANDALF analysis

R. Zanino; C. Marinucci 

Cryogenics. 1999. Vol. 39, num. 7, p. 585-593. DOI : 10.1016/S0011-2275(99)00074-0.

Heat slug propagation in QUELL. Part II: 2-fluid MITHRANDIR analysis

R. Zanino; C. Marinucci 

Cryogenics. 1999. Vol. 39, num. 7, p. 595-608. DOI : 10.1016/S0011-2275(99)00075-2.

Stability and quench of dual cooling channel cable-in-conduit superconductors

B. Blau / M. Q. Tran (Dir.)  

Lausanne, EPFL, 1999. 

High-Temperature Superconductors: Materials, Properties, and Applications

R. Wesche 

Boston, MA: Kluwer Academic Publishers, 1998.

Concept and sensor for extrinsic diagnostic of magnet systems from the safety point of view

M. Zhelamskij; N. Gorbachuk; A. Anghel 

1998. 20th SOFT Conference.

Two-fluid analysis of the thermal-hydraulic stability of ITER CS and TF superconductors

R. Zanino; C. Marinucci; L. Savoldi 

1998. 17th Int. Cryo. Eng. Conference ICEC-17.

Design, fabrication and testing of a 100 kA superconducting transformer for the SULTAN Test Facility

G. Pasztor; A. Anghel; B. Blau; A. Fuchs; B. Jakob et al. 

1998. 15th International Conference on Magnet Technology, Beijing, China, October 1997. p. 839.

Fusion and plasma physics research in Switzerland

P. Bruzzone; J. Lister; P. Paris; A. Pochelon 

1998. 

Neon refrigeration for high temperature superconducting power cable

D. Dew-Hughes; R. G. Scurlock; J. H. P. Watson; A. Anghel; G. Pasztor et al. 

1998. 17th Int. Conference Cryogenic Engineering Conference, Bournemouth, UK, p. 337-340.

QUELL experiment: analysis and interpretation of the quench propagation results

A. Anghel 

Cryogenics. 1998. Vol. 38, num. 5, p. 459-466. DOI : 10.1016/S0011-2275(98)00016-2.

AC losses and stability on large cable-in-conduit superconductors

P. Bruzzone 

Physica C. 1998. Vol. 310, num. 1-4, p. 240-246. DOI : 10.1016/S0921-4534(98)00469-9.

Stability estimate for CICC with cooling channel using one- and two-fluid codes

S. DePalo; C. Marinucci; R. Zanino 

Advances in Cryogenic Engineering. 1998. Vol. 43, p. 333-339.

The QUELL experiment as a validation tool for the numerical code Gandalf

C. Marinucci; L. Bottura; G. Vecsey; R. Zanino 

Cryogenics. 1998. Vol. 38, num. 5, p. 467-477. DOI : 10.1016/S0011-2275(98)00014-9.

Magnetic and mechanical AC loss of the ITER CS1 model coil conductor under transverse cyclic loading

A. Nijhuis; N. H. W. Noordman; H. H. J. ten Kate; N. Mitchell; P. Bruzzone 

Physica C-Superconductivity and Its Applications. 1998. Vol. 310, num. 1-4, p. 253-257. DOI : 10.1016/S0921-4534(98)00471-7.

Computer simulation of quench propagation in QUELL

R. Zanino; L. Bottura; C. Marinucci 

Advances in cryogenic Engineering. 1998. Vol. 43, p. 181-188.

A high resolution magnetization sensor for AC loss measurement on cable-in-conduit conductors

M. W. Zhelamskij; P. Bruzzone 

Physica C. 1998. Vol. 310, num. 1-4, p. 262-266. DOI : 10.1016/S0921-4534(98)00473-0.

Development of long lengths Ag and AgNiMg/Bi-2212 superconductors

R. Wesche 

High-Temperature Superconductors: Synthesis, Processing, and Applications II; Warrendale, USA: The Minerals, Metals & Materials Society, 1997.

The ITER-QUELL, a quench propagation experiment on long length CICC with central channel

A. Anghel; Y. Takahashi; S. Smith; S. Pourrahimi; M. Zhelamskij et al. 

1997. 19th Symposium on Fusion Technology.

Superconductors for fusion magnets: realizations, prototypes and running projects

P. Bruzzone 

Superconductor Science & Technology. 1997. Vol. 10, num. 12, p. 919-923. DOI : 10.1088/0953-2048/10/12/012.

Development program of a 60 kA current lead using high temperature superconductors

R. Heller; G. Friesinger; W. Goldacker; H. Kathol; B. Ullmann et al. 

Ieee Transactions on Applied Superconductivity. 1997. Vol. 7, num. 2, p. 692-695. DOI : 10.1109/77.614598.

Performance of the quench detection system for ITER

C. Marinucci; L. Bottura; S. Pourrahimi; M. Zhelamskij 

Ieee Transactions on Applied Superconductivity. 1997. Vol. 7, num. 2, p. 443-446. DOI : 10.1109/77.614524.

Performance of the US quench detection systems in the QUELL experiments

S. Pourrahimi; S. P. Smith; J. H. Schultz; J. V. Minervini; S. Ezekiel et al. 

Ieee Transactions on Applied Superconductivity. 1997. Vol. 7, num. 2, p. 447-450. DOI : 10.1109/77.614530.

A comparison between 1- and 2-fluid simulations for QUELL

R. Zanino; L. Bottura; C. Marinucci 

IEEE Trans. on Applied Superconductivity. 1997. Vol. 7, p. 494-496. DOI : 10.1109/77.614547.

Fabrication and properties of superconducting AgNiMg and Ag/Bi-2212 wires

R. Wesche; A. M. Fuchs; G. Pasztor 

High Temperature Superconductors: Synthesis, Processing, and Large-Scale Applications; Warrendale, USA: The Minerals, Metals & Materials Society, 1996.

Development of Bi-2212/Ag wires for magnet applications

R. Wesche; A. M. Fuchs; B. Jakob 

Studies of High Temperature Superconductors; Commack, USA: Nova Science Publishers, 1996. p. 97-123.

Evaluation of a NbTi cable-in-conduit prototype superconductor for the Wendelstein 7-X magnet system

B. Blau; B. Jakob; G. Pasztor; G. Vecsey; A. Cerri et al. 

Ieee Transactions on Magnetics. 1996. Vol. 32, num. 4, p. 2430-2433. DOI : 10.1109/20.511364.

The fabrication and properties of Nb3Sn superconductors by the internal tin process

B. Jakob; G. Pasztor; A. Cerri; F. Vanini 

Ieee Transactions on Magnetics. 1996. Vol. 32, num. 4, p. 2886-2889. DOI : 10.1109/20.511478.

Axial and bending strain effects in Ag and AgNiMg/Bi-2212 wires

R. Wesche; A. M. Fuchs; B. Jakob; G. Pasztor 

Cryogenics. 1996. Vol. 36, num. 6, p. 419-426. DOI : 10.1016/0011-2275(95)00171-9.

The ITER quench experiment on long length at the SULTAN facility

A. Anghel; C. Marinucci; G. Vecsey; Y. Takahashi; J. Schultz et al. 

1995. 18th Symposium on Fusion Technology, Karlsruhe, Germany, August 1994. p. 881-884.

The quench experiment on long length cable-in-conduit conductor (QUELL) in SULTAN

A. Anghel 

Journal of Fusion Energy. 1995. Vol. 14, num. 1, p. 129-139. DOI : 10.1007/BF02214040.

Ac Behavior of Full-Size, Fusion Dedicated Cable-in-Conduit Conductors in Sultan-Iii under Applied Pulsed-Field

B. Blau; I. Rohleder; G. Vecsey; L. Bottura; P. Bruzzone et al. 

Ieee Transactions on Applied Superconductivity. 1995. Vol. 5, num. 2, p. 697-700. DOI : 10.1109/77.402643.

AC behaviour of full size, fusion dedicated cable-in-conduit conductors in SULTAN III under applied pulsed field

B. Blau; I. Rohleder; G. Vecsey; L. Bottura; P. Bruzzone et al. 

Ieee Transactions on Applied Superconductivity. 1995. Vol. 5, num. 2, p. 697-700. DOI : 10.1109/77.402643.

Numerical simulations of the QUELL experiment in SULTAN

C. Marinucci 

Journal of Fusion Energy. 1995. Vol. 14, num. 1, p. 141-157. DOI : 10.1007/BF02214041.

A first characterization of the quench detection system for ITER

C. Marinucci; L. Bottura; S. Pourrahimi 

Journal of Fusion Energy. 1995. Vol. 14, num. 1, p. 75-92. DOI : 10.1007/BF02214036.

Temperature-Dependence of Critical Currents in Superconducting Bi-2212/Ag Wires

R. Wesche 

Physica C. 1995. Vol. 246, num. 1-2, p. 186-194. DOI : 10.1016/0921-4534(95)80024-7.

Qualification of a 40 Ka Nb3sn Superconducting Conductor for Net/Iter Coils

D. Bessette; J. L. Duchateau; P. Decool; B. Turck; B. Blau 

Ieee Transactions on Magnetics. 1994. Vol. 30, num. 4, p. 2038-2041. DOI : 10.1109/20.305668.

Development of binary superconducting current leads with a gas cooled normal part

A. M. Fuchs; A. Anghel; B. Jakob; G. Pasztor; G. Vecsey et al. 

Cryogenics. 1994. Vol. 34, p. 627-630. DOI : 10.1016/S0011-2275(05)80147-X.

Electromagnetic design of the SL superconducting bending magnet with linear gradient

C. Marinucci; G. Vécsey 

IEEE Trans. on Magnetics. 1994. Vol. 30, p. 1942-1945. DOI : 10.1109/20.305644.

Diameter-Dependent Critical-Current Densities for Superconducting Bi-2212/Ag Wires

R. Wesche; A. M. Fuchs; B. Jakob; G. Pasztor 

Cryogenics. 1994. Vol. 34, num. 10, p. 805-811. DOI : 10.1016/0011-2275(94)90065-5.

Status-Report on the 12-Split Coil Test Facility Sultan

B. Blau; E. Aebli; B. Jakob; G. Pasztor; G. Vecsey et al. 

Ieee Transactions on Magnetics. 1992. Vol. 28, num. 1, p. 202-205. DOI : 10.1109/20.119845.