Teaching

Lectures by Prof. Brugger

  • Advanced additive manufacturing technologies

    Advanced 3D forming techniques for high throughput and high resolution (nanometric) for large scale production. Digital manufacturing of functional layers, microsystems and smart systems.

    MINEUR, Spring semester
    Section of Mechanical Engineering, Master semester 2
    Section of Mechanical Engineering, Master semester 4
    Section of Microtechnics, Master semester 2
    Section of Microtechnics, Master semester 4
    Teachers : Brugger Jürgen.
    Language : english
    Academic term : 2019-2020


  • Advanced topics in micro- and nanomanufacturing: top-down meets bottom-up

    This course introduces advanced fabrication methods enabling the manufacturing of novel NEMS/MEMS. Both top-down (stenciling, scanning probes, additive techniques) and bottom-up approaches (self-assembly) are presented.

    Doctoral Program in Microsystems and Microelectronics,
    Teachers : Brugger Jürgen.
    Language : english
    Academic term : 2019-2020


  • Clean room practical work (Autumn)(in groups)

    In groups of 4 students and accompanied by an assistant, each student will learn basic procedures and manipulations, as practiced in a clean room. For each group, the TP consists of 3 sessions of 4 hours each.

    Section of Microtechnics, Bachelor semester 5
    Section of Microtechnics, Bachelor semester 6
    Teachers : Brugger Jürgen.
    Language : french
    Academic term : 2019-2020


  • Fundamentals of microfabrication

    The student will learn the fundamental aspects of modern micro and nanofabrication as they are being used in modern clean room facilities. The course focuses mainly on silicon based technologies but introduces also other materials of interest for micro and nanosystems.

    MINEUR, Autumn semester
    Section of Life Sciences Engineering, Master semester 1
    Section of Life Sciences Engineering, Master semester 3
    Section of Microtechnics, Bachelor semester 5
    Teachers : Brugger Jürgen.
    Language : english
    Academic term : 2019-2020


  • Introduction to additive manufacturing

    The state of the art in the domain of additive production processes (the part is built by material addition without use of a shape tool) will be presented. The main application/benefits/shortcomings of the common additive processes as well as technological and economical issues will be discussed.

    MINEUR, Autumn semester
    Section of Mechanical Engineering, Master semester 1
    Section of Mechanical Engineering, Master semester 3
    Section of Microtechnics, Master semester 1
    Section of Microtechnics, Master semester 3
    Teachers : Brugger Jürgen.
    Language : english
    Academic term : 2019-2020


  • MEMS practicals I

    Objective of this practical is to apply in specific experimental settings the knowledge acquired in various MEMS related class

    Section of Microtechnics, Master semester 1
    Section of Microtechnics, Master semester 3
    Teachers : Brugger Jürgen.
    Language : english
    Academic term : 2019-2020


  • MEMS practicals II

    Objective of this practical is to apply in specific experimental settings the knowledge acquired in various MEMS related class

    Section of Microtechnics, Master semester 2
    Section of Microtechnics, Master semester 4
    Teachers : Brugger Jürgen.
    Language : english
    Academic term : 2019-2020


  • MOOC: Micro and Nanofabrication (MEMS)

    Micro- and nanofabrication can be taught to students and professionals by textbooks and ex-cathedra lectures, but the real learning comes from seeing the manufacturing steps as they happen. This MOOC will not only explain the basics of microfabrication but also show the practice through videos.

    Doctoral Program in Microsystems and Microelectronics,
    Doctoral program in advanced manufacturing,
    Teachers : Brugger Jürgen.
    Language : english
    Academic term : 2019-2020


  • Nanotechnology

    This course gives the basics for understanding nanotechnology from an engineer's perspective: physical background, materials aspects and scaling laws, fabrication and imaging of nanoscale devices.

    Section of Microtechnics, Master semester 2
    Section of Microtechnics, Master semester 4
    Teachers : Brugger Jürgen.
    Language : english
    Academic term : 2019-2020


  • Soft Microsystems Processing and Devices

    Amongst others, following topics will be covered during the course: - Soft Microsystems and Electronics - Electroactive polymers - Printed electronics and microsystems - Inkjet printing of polymers - Stretchable electronics - Mechanical reliability

    Doctoral Program in Microsystems and Microelectronics,
    Doctoral program in advanced manufacturing,
    Teachers : Brugger Jürgen.
    Language : english
    Academic term : 2019-2020


  • Teaching MER. Giovanni Boero

  • General physics : electromagnetism

    An introduction to fluids mechanics, to electromagnetism, and to wave phenomena

    Section of Microtechnics, Autumn semester
    Section of Microtechnics, Bachelor semester 3
    Teachers : Boero Giovanni.
    Language : french
    Academic term : 2019-2020


  • MEMS practicals I

    Objective of this practical is to apply in specific experimental settings the knowledge acquired in various MEMS related class

    Section of Microtechnics, Master semester 1
    Section of Microtechnics, Master semester 3
    Teachers : Boero Giovanni.
    Language : english
    Academic term : 2019-2020


  • MEMS practicals II

    Objective of this practical is to apply in specific experimental settings the knowledge acquired in various MEMS related class

    Section of Microtechnics, Master semester 2
    Section of Microtechnics, Master semester 4
    Teachers : Boero Giovanni.
    Language : english
    Academic term : 2019-2020


  • Micro-magnetic field sensors and actuators

    The course provides the basis to understand the physics, the key performance, and the research and industrial applications of magnetic sensors and actuators. Together with a detailed introduction to magnetism, several magnetic sensors and actuators are studied.

    Doctoral Program in Microsystems and Microelectronics,
    Teachers : Boero Giovanni.
    Language : english
    Academic term : 2019-2020


  • Nanotechnology

    This course gives the basics for understanding nanotechnology from an engineer's perspective: physical background, materials aspects and scaling laws, fabrication and imaging of nanoscale devices.

    Section of Microtechnics, Master semester 2
    Section of Microtechnics, Master semester 4
    Teachers : Boero Giovanni.
    Language : english
    Academic term : 2019-2020


  • Sensors

    Understand the physical principles of sensors. Overview of the transduction principles and associated electronics. Examples of sensors.

    Section of Life Sciences Engineering, Bachelor semester 6
    Section of Microtechnics, Bachelor semester 6
    Section of Microtechnics, Spring semester
    Teachers : Boero Giovanni.
    Language : french
    Academic term : 2019-2020